Professional Documents
Culture Documents
ABOUT US
EN ASTM EN ASTM
CW602N C36000 CC483K CUSN12 C83600
CW614N C37700 CC484K C86300
CW617N C38500 CC491K RG5 C90300
CW710R C46400 CC493K RG7 C90700
CW713R C67300 CC495K C93200
CW719R C67400 CC496K C93700
CONTINUOUS CASTING
In this process, molten metal is poured through a graphite mold. The opposite end of the mold contains a
cooling apparatus. The withdrawing rollers draw the solidified rod from the mold at a continuous rate and
pass it through additional cooling and finally cross cutting. The improved mechanical properties of parts
produced by continuous casting and its lower cost of operation for larger runs, make this method very
economical.
EN ASTM ASTM
CC333G C62300 C51000
CC334G C62400 C52100
CW302G *C63000 C52400
CW306G **C64200 C54400
CW307G C95400
CW308G C95500
* AMS-4640
** AMS-4634
EXTRUSION
Extrusion is a process by which metal at a plastic state is forced to flow through a shape-forming die.
When it emerges out of the die it inherits the shape of the die. Extrusion differs from drawing in that the
metal is pushed, rather than pulled under tension. Using extrusion, a wide range of shapes can be produced.
EN ASTM EN ASTM
CW509L C46400 CB483K C83600
CW510L C86300 CB491K C85700
CW511L C90500 CB752S C85800
CW719R C95400 CB753S C90300
CB754S C90700
CB755S C93200
SHAPES
ISO • EN • BS • DIN • UNI • ASTM • SAE • AMS • QQB • QQC • RoHS • REACH
INDUSTRIES
WWW.FINKELSTEIN-METALS.COM
21 Haiztadion st. P.O Box 10038, Haifa-Bay 2611001, Israel
Tel: 972-4-8477500 • Fax: 972-4-8720288 • Mail: info@finkelstein-metals.com