Professional Documents
Culture Documents
2021
www.gmf-aeroasia.co.id
Disclaimer
The information contained in these documents is confidential, privileged, and
only for the information of the intended recipient and may not be used,
published or redistributed without the prior written consent of PT Garuda
Maintenance Facility Aero Asia Tbk “(GMF)”.
The opinions expressed are in good faith and while every care has been
taken in preparing these documents, GMF makes no representations and
gives no warranties of whatever nature in respect of these documents,
including but not limited to the accuracy or completeness of any information,
facts and/or opinions contained therein.
The content of this document and all information relating to it shall be kept
strictly private and confidential by the parties.
www.gmf-aeroasia.co.id 2 |
GMF
Learning Services
www.gmf-aeroasia.co.id 3 |
Learning Services
Adapting with the pandemic, GMF Learning Services offers two (2) kinds of class method: Long Distance Learning
(Synchronous Training) which instructors and students are physically separated but still be able to interact at the real
time and E-Learning (Asynchronous Training) which Instructors and students are physically separated with not
interaction at all.*
www.gmf-aeroasia.co.id 4 |
Learning Services
Learning Services
www.gmf-aeroasia.co.id 5 |
Learning Services
Learning Services
E-Learning
Training Modules will be available on the web-
based link given after successfully registered:
• General Aviation
• Basic Technical English
• Human Factor for A/C Maintenance
• Arrival Departure & Technical Handling
• Safety Awareness
• Marshalling
• Dangerous Good Awareness
www.gmf-aeroasia.co.id 6 |
Learning Services
Learning Services
Industrial Services •
•
•
Trent 700 Familiarization
Basic Supervisory Training for Shop
Basic Aircraft (147 Approve)
www.gmf-aeroasia.co.id 7 |
Learning Services
Dedicated to provide
The Best Service Solution
for Your business.
GMF Power Services was established in 2006 to provide maintenance
and services of:
• Heavy Duty Industrial Gas Turbines and Aeroderivative Gas Turbines
both in repairing parts and field services.
• Gas Turbine Component Repair and Refurbishment.
• Power Generation Services in the major of Generator & Motor
Rewinding Base Repair and Overhaul.
• Gas Turbine, Generator and Motor Control and Protection Services.
• Performance Analyzing & Engineering Service of Electrical and
Mechanical Rotating Equipment
www.gmf-aeroasia.co.id 8 |
Our Certifications
ISO:17025
Workshop Calibration Management System
www.gmf-aeroasia.co.id 9 |
Workshop Capability
Turbine Repair & Overhaul
www.gmf-aeroasia.co.id 10 |
Workshop Capability
Power Generator & Electrical Control
www.gmf-aeroasia.co.id 11 |
Field Services Turbine Overhaul
www.gmf-aeroasia.co.id 12 |
Field Services Power Motor Generator
www.gmf-aeroasia.co.id 13 |
Turbine Repair Workshop Services
www.gmf-aeroasia.co.id 14 |
Motor Generator Workshop Services
www.gmf-aeroasia.co.id 15 |
Laboratories Facility
Testing Capability
• Hardness Testing
• Ultra Sonic Testing
• Optical Light Microscopy
• Creep Rupture Strength Testing (sub)
• Tensile Strength Testing
• Adhesion coating Testing
• XRF Testing
Qualification Coating
• Bonding Strength
• Metallographic thermal spray
• Thickness Coating
• Surface Roughness
www.gmf-aeroasia.co.id 16 |
Power Generator & Electrical Control Facility
• ITIG Instrument
• OMICRON CPC100, CPTD1,
MPD600, CPCR500
• ELCIT ( Electromagnetic Core
Imperfection Detector)
• VPI (Vacuum pressure Impregnation)
• WTD (Wedges Thingness Detector)
• RSO (Repetitive Surge Oscillograph)
• Rewinding Machine
• Balancing Machine cap 7Ton
www.gmf-aeroasia.co.id 17 |
Our Turbine Repair & Overhaul Customers
www.gmf-aeroasia.co.id 18 |
Our Power Generator & Electrical Control
Repair & Overhaul Customers
www.gmf-aeroasia.co.id 19 |
Machining Facility
As a Part of GMF Industrial Services
www.gmf-aeroasia.co.id 20 |
Machine & Equipment Turbine Repair
www.gmf-aeroasia.co.id 21 |
Machining Center
www.gmf-aeroasia.co.id 22 |
Surface Treatment Facility
www.gmf-aeroasia.co.id 23 |
NDT Services & Facility
As a Part of GMF Industrial Services
www.gmf-aeroasia.co.id 24 |
NDT Facility
GMF Power Services provides We help you ensure the reliability and safety of your products, equipment or plant assets
non-destructive testing (NDT), with our world-class services in non-destructive testing (NDT) but not limited to:
materials testing and welding • Penetrant Inspection
services for a diverse range of • Penetrant Magnetic Inspection
• Ultrasonic Inspection
industries such as train, marine, • Eddy Current Inspection
heavy equipment, offshore & • Radiographic Inspection
onshore, powerplant, oil & gas, • Thermograph Inspection
and constructions sector. • Borescope
www.gmf-aeroasia.co.id 25 |
NDT Facility
Train Inspection
Method to Inspect
• References / Manual
• Tool
www.gmf-aeroasia.co.id 26 |
NDT Facility
Marines Industry
Method to Inspect
Object to Inspect
• Penetrant Inspection
• Magnetic Particle
• Ultrasonic Testing (UT) of Composite Boats and Spars • Ultrasonic
• Ultrasonic Testing (UT) of Welds in metal • Radiography
• Metal Hull Inspections and Corrosion Measurement • Thermography
• Penetrant Testing (PT) & Magnetic Particle test of Boat
Components
• Radiography of Weld Lines Requirements
• MPI of weld Ship
• Thermography of The machinery, electrical installations • Personnel Qualification SNT-TC1A
plumbing as well as heating/cooling equipment
• Personnel Qualification BKI
• References / Manual
• Tool
www.gmf-aeroasia.co.id 27 |
NDT Facility
www.gmf-aeroasia.co.id 28 |
NDT Facility
• References / Manual
• Tool
www.gmf-aeroasia.co.id 29 |
NDT Facility
Method to Inspect
Powerplant Industry • Ultrasonic
• Radiography
• Eddy Current
Object to Inspect • Penetrant
• Magnetic Particle
• Acoustic
• Radiography of Vessel • Thermography
• Radiography of Boiler
• Ultrasonic Of Weld
• Radiography of Weld Requirements
• Ultrasonic of Weld
• Eddy Current (internal) of Tube Boiler • Personnel Qualification SNT-TC1A
• Acoustic Eye of Tube Boiler
• Eddy Current of Shaft • KAN 17020
• Penetrant of Shaft, Bearing, etc
• Ultrasonic Bonding line test of Bearing • References / Manual
• MPI of Weld
• Thermography of The machinery, electrical installations • Tool
plumbing as well as heating/cooling equipment
www.gmf-aeroasia.co.id 30 |
NDT Facility
Method to Inspect
Oil & Gas Industry
• Ultrasonic Testing (Conventional
& Phased Array)
Object to Inspect • Eddy Current Testing
• Radiography
• UT Phased Array of Weld Joint Pipeline
• Eddy Current Array Pipeline
• UT Corrosion pipeline Under Insulation,
• UT Flaw Detection of Weld Pipeline Requirements
• Radiography of Weld Pipeline
• Personnel Qualification SNT-TC1A
• SKT MIGAS
• ISO 90001
• References / Manual
• Tool
www.gmf-aeroasia.co.id 31 |
NDT Facility
Method to Inspect
Construction
• Ultrasonic Testing
• Penetrant Testing
Object to Inspect • Magnetic Particle Testing
• Radiography
• Radiography , Ultrasonic of Beam product
• Ultrasonic of Tubular product
• Ultrasonic Pulse Velocity concrete
Requirements
• Personnel Qualification SNT-TC1A
• ISO9712
• References / Manual
• Tool
www.gmf-aeroasia.co.id 32 |
Calibration Services
As a Part of GMF Industrial Services
www.gmf-aeroasia.co.id 33 |
Our Specialties
1 Pressure
2 Dimensional
3 Electrical
4 Force & Mass
5 Temperature
6 Flow
www.gmf-aeroasia.co.id 34 |
Pressure Laboratory
Calibrator
▪ Hydraulic Dead-Weight Tester SI PRESSURE ▪ Portable Calibrator DRUCK DPI 605
( 0 to 20000 ) PSI Internal : -1 to +20 bar gauge, accuracy : 0,05 % of reading
Accuracy : 0.008 % of reading ▪ FLUKE RPM 4 ( Refference Presure Monitor )
▪ Process Calibrator FLUKE 744 Pt = 350 kPa
( 0 to 500 ) PSI, accuracy : 0.08 % of reading Ps = 160 kPa
( 0 to 1000 ) PSI, accuracy : 0.08 % of reading ▪ DRUCK DPI 620
( 0 to 1500 ) PSI, accuracy : 0.08 % of reading 2 bar to 200 bar, acuracy : 0.025 % of Full Scale
( 0 to 3000 ) PSI, accuracy : 0.08 % of reading ▪ DRUCK DPI 615 IS
( 0 to 5000 ) PSI, accuracy : 0.08 % of reading 20 bar to 350 bar, accuracy : 0,025 % of Full Scale
( 0 to 10000) PSI, accuracy : 0.08 % of reading 2 bar a to 20 bar a, accuracy : 0.025 % of Full Scale
▪ WIKA MENSOR CPC2000
0 to 100 hPa, accuracy : 0,4 % of reading
▪ LAVERSAB 6580-AH ( ADTS Calibrator )
www.gmf-aeroasia.co.id 35 |
Dimensional Laboratory
Calibrator
▪ LVDT HEIDENHAIN MT25 ▪ Angle Gauge Block TESA
Range : ( 0 to 25 ) mm ▪ Dial Gauge Tester SYLVAC P25
Accuracy : 0.0002 mm Range : ( 0 to 25 ) mm
▪ Check Master MITUTOYO 515 - 723 Accuracy : 0.002 mm
Range : ( 0 to 100 ) cm ▪ LVDT HEIDENHAIN CP60M
▪ Depth Micro Checker MITUTOYO 515 - 575 Range : ( 0 to 60 ) mm
Range : ( 0 to 6 ) inch Accuracy : 0.0001 mm
▪ Ring Gauge
▪ Gauge Block ( inch and mm ) MITUTOYO , O Class
▪ Beveltronik for Surface / Granite Plate Calibrator TESA
www.gmf-aeroasia.co.id 36 |
Electrical Laboratory
Calibrator
▪ Angle Position Indicator NORTH ATLANTIC 8810 ▪ Multi Product Calibrator FLUKE 5520A
▪ Pulse Generator HP 8012B ▪ GPS Controlled Frequency Standard FLUKE 910R
▪ Function Generator HP 3310B ▪ VOR Radial Transfer Standard JCAIR 78A
▪ Digital Tachometer ONO SOKKI HT-5500 ▪ Programmable Resolver Synchro NORTH ATLANTIC 5300
▪ Oscilloscope TEKTRONIX TDS2012 ▪ Turn Current Coil FLUKE 5500A / Coil
▪ True RMS Clamp Meter FLUKE 375 ▪ Signal Generator R/S SML03
▪ Meter Calibrator FLUKE 5100B ▪ Refference : Multimeter FLUKE 8508A
▪ Decade Voltage Divider GENERAL RADIO 1455B ▪ Prog.Automatic RCL Meter FLUKE PM6304
▪ Decade Capacitor HP 4440B ▪ Spectrum Analyzer HP 8563E
▪ H.V Probe ENGLAND HV40B ▪ Decade Resistor YOKOGAWA 2793-03
▪ DC/AC Current Probe FLUKE Y8100 ▪ Power Meter HP 438A
▪ Stopwatch CASIO HS-20 ▪ Universal Counter HP 5316B
www.gmf-aeroasia.co.id 37 |
Force & Mass Laboratory
Calibrator
▪ Torque Tester ( 0 to 250 ) lb ft. and (0 to 2500 ) lb ft. ▪ EZ TORQ DIGITAL TORQUE ANALYZER
Accuracy : 1 % 0 to 10 lb.in, accuracy 1% : 10 % – 20 % FS
▪ Portable Torque Tester ( 0 to 50 ) lb ft 0.5 % : 20 % - 100 % FS
▪ Dynamometer T/S, ( 0 to 20000 ) lb 0 to 50 lb.in, accuracy 1% : 10 % – 20 % FS
Accuracy : 0.04 % 0.5 % : 20 % - 100 % FS
▪ Mass Standard E2 Class
▪ Load Cell ( 0 to 100000 ) lb
Accuracy : 0.05 %
▪ 23 pcs F Class Weight AKO
▪ Calibration Arm AKO
www.gmf-aeroasia.co.id 38 |
Temperature Laboratory
Calibrator
▪ Drywell HART SCIENTIFIC 9122
▪ Furnace HART SCIENTIFIC 9150A
▪ Zero Point FLUKE
▪ Type S Thermocouple HART SCIENTIFIC 5650
▪ Blackstack & Module HART SCIENTIFIC 1560
▪ PRT HART SCIENTIFIC 5626
▪ Liquid Bath FLUKE 7321
▪ Universal Thermocouple ALTEK 422
▪ Thermo Hygro Calibrator FLUKE 1620 A DewK
▪ Climatic Chamber KAMBIC PKK-50
www.gmf-aeroasia.co.id 39 |
Flow Laboratory
Calibrator
▪ FLOW COMPUTER from FLOWTECHNOLOGY INC.
▪ TURBINE FLOWMETER from FLOWTECHNOLOGY INC.
Range : 0.03 - 3.00 GPM
▪ TURBINE FLOWMETER from FLOWTECHNOLOGY INC.
Range : 11 - 250 GPM
▪ CRITICAL FLOW VENTURY from FLOW SYSTEMS
Range : 0.0005.94 LBMS – 1.79 LBMS
www.gmf-aeroasia.co.id 40 |
Our Growing List of Customer
Adi Warna Pratama | Adimindo Rekajaya | Emblem Asia | GYRODATA | Jagat Baja Prima |
MTG Kalibrasi | Petrosea | Pratita | Global Mandiri Inst | Bukaka Forging Industries | Caltesys |
Dowell Anadrill Schlumberger | Haliburton | Jabat Baja P.U | Radiant Utama Interinsco, Tbk |
Schlumberger Geophysics Nusantara | Sinar Arief Karyatama | Siwali | Smith Tool Indonesia |
Sulzer Turbo Service Indonesia
www.gmf-aeroasia.co.id 41 |
Thank You.
www.gmf-aeroasia.co.id