Professional Documents
Culture Documents
Industry Training
from SITRAIN India
www.siemens.com/sitrain
SITRAIN – Training For Industry
2
SITRAIN – Training For Industry
SITRAIN – Training For Industry
5 Training Overview
6 USPs of SITRAIN
9 Automation Courses
31 Drives Courses
3
SITRAIN – Training For Industry
More about
Siemens
Industry
Training
Theoretical Download
Download
Invitation & Hands On Training
Online Online Certificate
from WBT Pre Test knowledge Material Post Test
Registration Feedback from
SITRAIN in Training from
myTraining
room myTraining
4
SITRAIN – Training For Industry
Training Overview
Industrial Training in Siemens has built up more than 200 professional training centers around
the world. Here In India, we have 8 training executors located in Navi Mumbai, Panchkula,
Chennai, Coimbatore, Thane, Kolkata, Hyderabad & Bhilai.
‘To be at the forefront of quality and technology is our principle’. Each training centre follows
uniform quality standard and principle of customer orientation. The training courses enable
our Siemens technical expertise and practical skills in the most efficient way so as to acquire
the ability of using our products and troubleshooting in on-site products. We provide various
options to our customers, from classroom course to on-site training, from standard courses to
customized courses and from self learning media to online courses. You may choose the suitable
courses according to your level and condition.
Feedback Process – 1. Immediately after program 2. Telephonic Feedback after 15 days
Training Content Basic knowledge the Trainee should Certificate awarded on completion
have of the course
We offer training on most of the
products and technology: • Engineering Background
• SIMATIC Programmable Controller: • Experience of Operating, Maintaining
SIMATIC S7 High-Tech Electrical Products
• SIMATIC NET: Industrial Ethernet, • Basic Knowledge of English Language
Profibus, AS-interface to understand the English interface
of Documentation
• SIMATIC HMI: WinCC, WinCC Flexible
• Process Control System: SIMATIC Various Course Setup
PCS7
• Standard course/customized course/
• Drives: SIMOVERT MASTERDRIVES VC/ Application Course
MC, SIMOREG
• Classroom Training/On -Site Training
• DC-Master, MM4, SINAMICS G150/
S120 Scientific Management and good
service
• Motion Control System: SIMOTION
• Agreeable Environment with
• Low Voltage Switchgear, Power
complete facilities
Distribution products, Energy
Management, Intelligent Motor • Standard training process
control (Smart product): SIMOCODE
• Training Resource Management
• Basic Automation for Switchgear
• Training Quality Control
users, basic communication for
Power Distribution products
• Process Instrumentation & Mechatronics
5
SITRAIN – Training For Industry
USPs of SITRAIN
Digitalization in Training Process Systematic approach for skill development
1. Program selection questioner – entrance tests 1. Introduction of new programs and training topics from
time to time
2. Hassel free registration process. The industry participants
can register themselves for training directly on the SITRAIN 2. More hands-on training through specially designed kits
webpage through this link www.siemens.co.in/sitrain for individual participants
3. Invitation/Confirmation from SITRAIN India 3. Practical Training directly from the manufacturer with
updated features and technology
4. Web based Training (WBT) is provided to every participant
to develop fundamental product knowledge before 4. Possibility of course customization offering flexibility in
attending the classroom training contents, media, location, time & duration
5. Pre & post test examination for self checking the subject 5. Balanced ratio between theoretical and hands-on training
development
6. Comprehensive range of training courses
6. Access the archives of training materials. Participants can
7. All training kits use industry products. Customer gets
download participated training documents/manual from
exposure to real industry products
the website
8. German standard documentation with kits. User-friendly
7. After 6 months, an examination to check retention of
documentation, ample illustrations and diagrams.
trained subject will be held.
6
SITRAIN – Training For Industry
7
SITRAIN – Training For Industry
8
AUTOMATION
10 SIMATIC S7-1200 with STEP7 V15
29 Process Instrumentation
30 SMSCP-L1
31 SMSCP-L2
AUTOMATION
Code: AS-1200 • Web server with user defined WebPages, PID block
• AS-AS Communication, Modbus TCP Communication,
Objectives: Making participants familiar/work with SIMATIC
MODBUS RTU
S7-1200 with STEP 7 V15, various communication with
S7‑1200 like Modbus TCP/IP, G120 Integration. • I-device communication, MRP, Introduction to PROFINET
• G120 integration with S7-1200 using Motion Control
Benefits: After successful completion of training the
• Introduction of Migration from S7- 200 CL to S7-1200
participant will be familiarized with the features of S7
1200 and its applications. This training will also help them Participant Prerequisite: Basic Knowledge of Automation
to develop the understanding of hardware and software technology / relay logic
diagnostics of S7 1200 and networking capabilities of S7
1200. Hardware and Software to be used:
• S71200 kit with HMI panel
Target Group: Developer, Users, Commissioning / Service /
Maintenance Engineers • Laptops/ PC systems installed with TIA Portal V15 software
10
AUTOMATION
Networking on Profibus/Profinet with V5.x
Language: English
11
AUTOMATION
12
AUTOMATION
SIMATIC S7-1500 with TIA V15 Advance
13
AUTOMATION
14
AUTOMATION
SIMATIC S7-300 with STEP7 V5.x Advance
15
AUTOMATION
16
AUTOMATION
SIMATIC S7-400 with STEP7 V5.x Advance
17
AUTOMATION
Language: English
18
AUTOMATION
SIMATIC WinCC (TIA Portal) Professional V15
Language: English
19
AUTOMATION
Language: English
20
AUTOMATION
SIMATIC WinCC Explorer V7.x Advance
21
AUTOMATION
Code: AS-PCS7B • Working with different views like Component View & Plant
View.
Objectives: Making participants familiar with SIMATIC PCS 7
• Working with CFC Charts and develop logic using CFC
System.
charts & optimization of the charts.
Benefits: One will be able to understand the following; • Working with SFC Charts and develop sequences using
1. The basic system architecture of a DCS system with SFC charts. Various control modes available with SFC
prerequisites of a PCS 7 project for a process plant. charts.
2. The role of SIMATIC Manager PCS 7 software in configuration • Compiling, downloading & testing CFC & SFC charts.
of different hardwares in system architecture. • Compiling Operator Station. Creating process pictures in
3. The detailed working of programming language like CFC, Graphics editor
SFC and use of pre-defined blocks from different libraries. • User interface in Process Control mode.
4. The basic function of configuring OS station for monitoring • Working with standard faceplates
& controlling process, use of Plant Hierarchy and generation • Messages and Trends.
of various Block icons and its relevant faceplates.
• Mass Data engineering tools like Process Object View,
5. Picture navigation, authorizations and Alarms/Values Process Tag Type & Models using Import Export assistant
archiving concept under PCS 7 OS.
• Introduction to Time synchronization, Life beat
6. The complete practical exercises in PCS 7 basic course monitoring, Picture tree Manager & User Administration.
revolves around a simulated process plant which gives
• Introduction to OS Project Editor.
feeling of working on actual plant software commissioning.
• Licensing Concept in PCS 7.
Target Group: Engineers in Instrumentation / Electrical / • Introduction of Server-Client architecture.
Electronics / Engineering.
Participant Prerequisite: Engineers working in DCS
Course Contents: controlled plant having knowledge in the area of process
• Introduction to standard architecture of PCS 7 like ES, AS, automation. Basic Know how about STEP 7 & WinCC Explorer
OS-Server & OS-Clients. software.
• Introduction to AS Hardware like PS, CPU & CPs.
Training Methodology: Explanation, demonstration and
Communication of remote stations with AS.
hands-on practice.
• Working with SIMATIC Manager in PCS7 fashioned way.
• Creating the Multiproject and Configuring Hardware (AS & Duration: 10 days, full time
OS)
Language: English
22
AUTOMATION
DCS: SIMATIC PCS 7 Advance
23
AUTOMATION
24
AUTOMATION
SIMATIC Distributed (Machine Safety) Course
25
AUTOMATION
26
AUTOMATION
Digitalization Auto Engineering
27
AUTOMATION
28
AUTOMATION
Process Instrumentation
Language: English
29
AUTOMATION
Description:
• Siemens Certified Mechatronic Systems Assistants Hardw
Softw are and
understand the full system. a
Troub re based
lesho Digital
• View the components or devices in terms of their roles Technical oting
Document Fundamentals
within the system, and work to keep the system running on and PLCs
interpretati
at maximum capacity. and Creation Elect
Pneu ro-
• Because the individual components or devices are viewed and H matic
l ydr
as “black boxes” in this certification level, they will not be anica Contr aulic
Mech nents o
responsible for carrying out repairs of defective devices. o
Comp ctrical Circu l
le its
However, they will be able to identify correctly where and E ives
Dr
malfunctions are occurring.
Electrical
Job Role post certification: Component
s
30
AUTOMATION
Siemens Mechatronic Systems Certification
Program (SMSCP)
Assistant / Level 2
Description:
• Siemens Certified Mechatronic Systems Associates Process control technologies
function as highly skilled technicians who can work
with modules and components in complex mechatronic
systems as well as be able to assess and analyze the
system as a whole. Introduction to Totally
Integrated Automation (TIA)
• Manage, investigate, repair and troubleshoot mechatronic
systems with the aim of operational efficiency and cost and
SMSCP L2
31
AUTOMATION
32
DRIVES
34 Basic course on AC/DC Drives
36 SIMOTION Basic
37 SIMOTION Advance
46 SINAMICS V20
47 SINAMICS V90
– will have a basic or fundamental knowledge of various DC/ • AC Drives Basics (Block diagram, 1Q-4Q principle of
AC Variable speed drives operation, T-N Curves etc)
– will know about the product specifications, range, • Selections, calculations & applications of typical AC drives.
hardware / constructional details and features of the
• AC Drives (Sinamics V, G & S) - Ratings, Specs, features,
product
options & applications.
Benefits: After successful completion of this training, you • MV Converter Basics & types (Voltage, Current Source &
will be able to perform drive start-up and parameterize drive Cyclo-converters)
for different configurations including use of programmable • Siemens MV Converters (Sinamics GM / GL, Sinamics SM /
digital and analog inputs and outputs SL)
Target Group: Users, Commissioning / Service / Maintenance • Sinamics Perfect Harmony GH180 Drive
/ Fresh Engineers • Selection, configuration & applications of MV Drive
systems
Course Contents:
• Hands on practice on DC and AC drive
• Brief Basic Power Electronics (including Thyristors, Power-
Transistors & IGBTs). Participant Prerequisite: Engineers in Electrical / Electronic
• DC Motor Basics (construction, principle of operation, T-N Engineering with Power Electronics Background
Characteristic etc).
Duration: 5 days, full time
• DC Drives Basics (Block diagram, 1Q-4Q principle of
operation, T-N Curves etc) Language: English
• Selections, calculations & applications of typical DC drives.
34
Basic AC-Drives with MM4 Maintenance
DRIVES
with Siemens made AC Drive MM4xx. • Using various Data sets – CDS, DDS
• Different types of braking methods
Benefits: After successful completion of training participants
will be capable of troubleshooting, commissiong & maintenance • Special functions - Automatic restart, Flying restart, Vdc
job max / min controller
• Using Free Function Blocks
Target Group: Users, Commissioning / Service / Maintenance
• Drive Monitor and STARTER demonstration and practice
Engineers
• Communication capabilities of MM4xx
Course Contents: • Fault diagnostics
• Need of Variable Frequency Drive • Replacement of different boards of Fx / Gx series
• Types of Motor, Basics of AC Motor, speed variation of AC • Periodic maintenance steps
motors, reversal & braking
• Cold testing of AC drive
• Detailed Block diagram of AC Drive
• Forming of Capacitors
• Inverter principle, PWM technique and power switching
• Hands on practice
devices
• Specifications, range, features and hardware details of Participant Prerequisite: Engineers in Electrical / Electronic
Micromaster MM4xx Engineering with Power Electronics Background
• Block diagram of the product, terminal details
Training Methodology: Explanation, demonstration and
• Parameter structure and quick commissioning procedure hands-on practice
• BICO technology, working with programmable binary and
analog inputs and outputs Duration: 5 days, full time
• Control and status word Language: English
35
SIMOTION Basic
the programming of movement sequences with the help of • Details of hardware components of Simotion-D system
Motion Control Chart and ladder diagram. • Software Components of Simotion
The technology positioning, synchronous operation, probe, • Creating Project with SCOUT
are explained and reinforced by means of practice-oriented
• Start Up – Axis Configuration & testing with SCOUT
examples.
• Programming with LAD/FBD
Benefits: The course enables you to use SIMOTION optimally • Programming with MCC
in the automation of production machinery.
• Run time licensing
Target Group: Users, Commissioning / Service / Maintenance • Fault diagnostics (Simotion & S120)
Engineers • Introduction to Remote Diagnostics using web server
Course Contents: • FW Upgrading
• Need of Variable Frequency Drive • Optional Hardware Components
• Types & Basics of Motor, speed variation of AC motors, NOTE: Hand-on practice will be on Simotion-D controllers.
reversal & braking
Participant Prerequisite: Participant should have basic
• Difference between Induction Motor & Servo Motor knowledge on servo system or S120 Basic and S120 Advance
• Product overview/portfolio of Siemens Servo motors training should be attended.
• Various feedback systems for Speed & Position feedback
Duration: 5 days, full time
• Block diagram of Drive System
• Introduction to Product Variants (Sinamics-G/Sinamics-S/ Language: English
Sinamics -V)
36
SIMOTION Advance
DRIVES
and Motion Control Chart. • Introduction to Programming with ST
The applications for the technologies are reinforced using • Creating Functions, Function Blocks & Libraries with ST
selected examples on our exercise equipment.
• Program locking with Scout.
Benefits: On completion of the course, you will be able to • Simotion Execution System
create parameterizable blocks such as FCs and FBs with the • Introduction to Gearing
help of the Structured Text language. With knowledge of
• Introduction to Camming, creating CAMs with CAM EDIT
the cam plate function, you will be able to parameterize and
program cam plate synchronization. • Communication of Simotion with ET stations & HMI.
This extends your scope for creating programs for your NOTE: Hand-on practice will be on Simotion-D controllers.
production machine.
Participant Prerequisite: Simotion Basic should be attended.
Target Group: Users, Commissioning / Service / Maintenance
Duration: 5 days, full time
Engineers
Language: English
37
SINAMICS S120 Basic
correct parameter setting you support the reliable operation • Operation of drive with speed control
of the entire plant.
• Sinamics Compact Flash structure
Benefits: After the course you can put the converter system • Licensining of Sinamics S120 system
SINAMICS S120 efficiently into operation. You can adapt the • Sinamics S120 & PLC (S7 300) over Profibus
parameters of the closed-loop controller to the respective
• Fault Diagnostics with Trace in Starter & other software /
application and use the diagnostic tools in case of a fault.
hardware options
Target Group: Users, Commissioning / Service / Maintenance • Free Function Blocks
Engineers • Project Backup
Course Contents: • FW & Project Upgradation
• Design and functional principle of the converter system • Introduction to Web server functionality with S120
SINAMICS S120 • Hands on practice on demo kit.
• Control unit, line infeed and motor modules
Participant Prerequisite: Engineers in Electrical / Electronic
• Motors, encoders and interfaces Engineering with Power Electronics Background
• Block diagram of Drive System
Duration: 5 days, full time
• Parameterization, data backup and diagnostics using
Software STARTER: Language: English
• Online connection via PROFIBUS and Ethernet
38
SINAMICS S120 Advance
DRIVES
DCC. 1500
• Drive HMI direct communication
Benefits: After the course, you will know these drive system
function extensions. You can commission the drive for • Drive to Drive communication over Sinamics Link.
demanding and complex applications and use the possibilities • Drive to Drive communication over drive CLIQ (open
for the STARTER PC program for efficient work. application link).
• Practical exercises on training equipment with
Target Group: Users, Commissioning / Service / Maintenance
SINAMICS S120
Engineers
Participant Prerequisite: Participants should attend S120
Course Contents:
Basic course.
• Position control and basic positioner
• Configuration and commissioning Duration: 5 days, full time
• Operating modes: Referencing, setpoint setting and Language: English
positioning block
• Drive Control Chart DCC
39
SINAMICS S120 Drives Safety Functions
40
SINAMICS Perfect Harmony GH180
DRIVES
different control boards used within perfect Harmony. • Programming-Compiling SOP
Benefits: You will understand the functional concept and the • Command Generator & Control Modes
control structures. You will parameterize the drive, diagnose • Startup Procedure
its status and analyse its function using the integral cabinet • Personal Safety
control panel, the TOOL SUITE PC tool and the DEBUG tool.
• ProToPS
Target Group: Users / Commissioning / Service / Maintenance • Up/Down Transfer
Engineers • Dual Frequency Braking
Course Contents: • Compact Flash structure
• Overview of AC drive and introduction to MV drive system • Taking Project Backup and Downloading project
• Introduction to Product Variants • Analyzing alarm and fault messages, Using Trace function
• Design and function of components used within Perfect • Replacement power cells and spare parts
Harmony • Hands on practice on MV drive
• Power Topology, cell based technology, concept of step
Participant Prerequisite: Basic knowledge and experience
PWM
with low voltage or medium voltage electrical drives.
• Hardware Identification
• Introduction to DCR (NxG, NxGII, NxG PRO) Duration: 5 days, full time
• Introduction & Function of different boards Language: English
• Location of various components in cabinet
41
SINAMICS G120 With Starter
Language: English
42
SINAMICS G120 With TIA Portal
DRIVES
how to handle the SINAMICS G120 inverter. • Power Module PM
• Parameterization, data backup and diagnostics with:
Benefits: After the course you will be able to correctly
commission the inverter and adapt it to address the particular • BOP-2 and IOP operator panels
application. You will know suitable inverter functions and • TIA Start drive PC tool
parameter settings for a wide range of applications. You can • Setpoint channel and closed-loop control
make a data backup, and taking the appropriate measures
• Control signals and signal interconnections
when faults occur.
• Inverter functions
Target Group: Users, Commissioning / Service / Maintenance • Diagonistics
Engineers
• Practical exercises using the training device.
Language: English
43
SINAMICS G130 / G150
drive for different requirements, using operator interfaces, • Function of modules and options
understanding the Engineering concepts, commissioning
• Diagnostics and troubleshooting, handling spare parts
steps and fault diagnostics in the Drive.
• Replacing modules and power blocks
Benefits: After the course you will be able to commission • Practical exercises at converter cabinet units:
the converter and make changes to the parameterization. In – Commissioning
case of faults, you can reduce downtimes by analyzing the
– Diagnostics and data backup
faults and their associated causes, and you can replace faulty
– Replacing components
components.
Participant Prerequisite: Engineers in Electrical / Electronics
Target Group: Users, Commissioning / Service / Maintenance
Engineering with basic working Knowledge of AC Drives.
Engineers
Training Methodology: Explanation, demonstration and
Course Contents:
hands-on practice
• Overview of SINAMICS G130/G150
• Commissioning and diagnostics with: Duration: 6 days, full time
– Advanced Operator Panel AOP30
Language: English
– STARTER PC tool
• Design of the converter and electrical cabinet
44
AC Drive:
SIMOVERT Masterdrive Vector Control
DRIVES
Siemens made AC Drive Master Drive VC • Torque Controlled Drive Configuration
Benefits: After this training participants will be capable for • Introduction to Drive Monitor software and parameterization
troubleshooting, commissiong & maintenance job / control through PC.
• Special Functions like Automatic Restart, Kinetic Buffering,
Target Group: Users, Commissioning / Service / Maintenance Flexible Response, DC braking, Synchronization.
Engineers
• Free Function Blocks
Course Contents: • Introduction only - communication capabilities of
• Product Pallet- Master Drives MASTERDRIVE
• Hardware Details and Specifications • Fault Diagnostics – Procedure
• Block Diagram and Power Connections • Engineering Concepts
• Control Connections and Terminal Details- CUVC Participant Prerequisite: Engineers in Electrical / Electronic
• BICO Technology and Flexibility Engineering with Power Electronics Background
• Start-Up for Open Loop V/f Control Mode
Duration: 6 days, full time
• Parameter Structure: Function Data Sets, Motor Data Sets,
BICO Data Sets and reading of Function Diagram Language: English
45
SINAMICS V20
46
SINAMICS V90
DRIVES
Sinamics V Assistant
Benefits: After the course you will be able to commission • Controlling the drive with different control modes
and control the drive with different control modes. You will
a) Internal Speed control
understand positioning concepts and be able to use them for
b) Internal position control (IPos)
different applications. You can create data backup and take
appropriate measures when faults occur. c) Pulse train input (PTI) – Using S7 1200 PLC
• Different positioning tasks using Motion control library in
Target Group: Users / Commissioning / Service / Maintenance S7 1200 PLC
Engineers
• Electronic gear ratio
Course Contents: • Real time tuning
• VFD working principle and getting familiar with the drive • Application examples
• Block diagram of AC Drive • Fault diagnostics
• Specifications, range, features and hardware details of • Hands-on practice
SINAMICS V90
Participant Prerequisite: Basic knowledge of electrical
• Block diagram of the product, terminal details
engineering and Servo system.
• Understanding of Operator panel functions, key operation
& status LEDs on the drive Duration: 3 days, full time
• Parameter structure and quick commissioning procedure Language: English
47
SIMOREG DC Master 6RA70
48
SINAMICS DC Master 6RA80
DRIVES
to broaden your theoretical knowledge by means of exercises • Function block diagrams: Setpoint channel, inputs/
carried out on special training equipment. outputs, free function blocks
• Concept of CDS and DDS
Benefits: Once you have completed the course, you will be
familiar with the functions of a converter and the respective • Using Micro Memory Card: Structure and data backups
interfaces. You will also be able to commission a converter • Information on Drive Control Charts (DCC)
quickly and reliably. Routine fault diagnosis and rectification • Drive-end interface to PROFIBUS / PROFINET
help save time and optimize the availability of your plant.
• Expansions with Terminal Modules and Sensor Modules
Target Group: Users, Commissioning / Service / Maintenance via DRIVE-CLiQ
Engineers • Parallel connections and peer-to-peer interfaces
• Thyristor Checking
Course Contents:
• Operating states, alarms, and fault codes
• Basics of DC Drive:-
a) Basic DC Motor equations • Service functions: Trace, measurement functions,
b) Three phase controlled converter Thyristor accessories diagnostic memories
d) PI Controller • Practical exercises with AOP30 and STARTER on training
e) Block diagram of DC Drive equipment
f) Braking & Reversal/Single & Multiquadrant Drive
g) Optimization Participant Prerequisite: Engineers in Electrical / Electronic
h) Speed variation techniques Engineering with Power Electronics Background
• Structure and functional principles of the SINAMICS DC Duration: 6 days, full time
MASTER converter: Control Unit CUD, Power Module,
excitation circuit, interfaces Language: English
• Commissioning and parameterization activities using the
BOP20 and AOP30 operator panels as well as the STARTER
PC program
49
Application Based Crane Training
• Commissioning procedure
Benefits: You will understand crane specifications, system
• Checking & setting important parameters
configuration, operational interlocks and control logic
including brake control. You will able to commission • Load test, trace recording
trouble shoot, aware about common faults and able to take • Add-on features/technology for crane control
appropriate measures when fault occur. • Overview on Sway control, Positioning, Straight run
controller, Wireless,
Target Group: Users, Commissioning / Service /Maintenance
Engineers of Instrumentation / Electrical / Electronic • CMS, YMS, RCOS
Engineering. • Fault diagnosis through touch panel / CMS station
• Common faults/problems in crane application
Course Contents:
• Troubleshooting & maintenance guidelines
• Crane Basics
• Crane types & components overview Participant Prerequisite: Basic Knowledge of Electrical
• Crane specifications, Standard system configurations system.
• Schematic drawing Duration: 5 days, full time
• Switchgear part
Language: English
• Product pallet for Crane applications & product features
• Operational interlocks & Stop categories for Hoist, Cross
travel & Long travel
50
LV SWITCHGEAR & MOTOR
52 LV Switchgear Products & Coordination
53 LV Switchgear Products, Distribution &
Panel
54 SIMOCODE AC-Motor control
55 Basic Automation for Switchgear User
56 AC Motor Basics Control &
Maintenance
57 SIRIUS Soft Starter
58 Sentron PAC Meter
LV Switchgear Products & Coordination
52
LV Switchgear Products, Distribution & Panel
53
SIMOCODE AC-Motor control
Language: English
54
Basic Automation for Switchgear User
• Introduction to various bus systems - PPI, MPI, Profibus, • Setting up the Profibus network on SIMATIC Manager,
TCP/IP adding DP devices like SIMOCODE, WL, Soft starter, PAC
• Basic Constituents of PLC meter
• How PLC works? • Communicating / controlling switchgear from PLC
• Overview of SIMATIC S7 PLC Participant Prerequisite: Engineers from electrical /
• Range, Functionality electronics engineering. Participants should be familiar with
• Hardware details like front indication, terminals, ports on the 3WL ACB, Soft-starter, PAC meter and Simocode.
module
Duration: 3 days, full time
• Introduction to selection
• Hardware configuration in TIA Portal Language: English
• PC-PLC communication
55
AC Motor Basics Control & Maintenance
induction motor.
• Insulation class & their temperature ranges.
56
SIRIUS Soft Starter
PLC.
of electronic soft starter.
• Phase angle control using thyristors & Speed Torque Duration: 2 days, full time
characteristics after usage of soft starter.
Language: English
57
Sentron PAC Meter
58
SITRAIN – Training For Industry
TIA Basic with SIMATIC S7 300 & STEP 7 at Esskay Services (ATC West)
“SITRAIN Trainers have excellent skills to explain technicalities step by step. Good
understanding about Step 7-300. Personnel like engineers working with Siemens
products, get good exposure on professional front.”
- From Rahul Ganeshwadi, Essar Oilfield Services, Dubai
TIA Basic with SIMATIC S7 300 & STEP 7 at Esskay Services (ATC East)
"I particularly liked the training methodology adopted by the trainer and cordial
atmosphere in the training centre."
- From Mr. Subramanian, TATA STEEL, Jamshedpur
59
SITRAIN – Training For Industry
Note: Training Centre (SITRAIN-Siemens Kalwa) and 8 STE's • (A) Every attempt will be made to conduct the courses
(SITRAIN Training Executors) are all centrally coordinated, as announced. However we reserve the right to
monitored & controlled by Siemens-SITRAIN, Kalwa. postpone or cancel the courses due to inadeqaute
MCMT (Machine Tool Drives) Training at Bangalore/Pune is booking or circumstances beyond our control. We
controlled from Bangalore shall do our best to send timely communication in
such situations, if possible
• (a) Advanced courses will be conducted at Siemens Ltd.,
Kalwa Works, Thane-Belapur Road, Thane - 400 601, • (B) Every attempt will also be made to accommodate
Maharashtra the participants at nearest (geographically) Siemens
Training Centre in your area. This is valid for all parts
• (b) Basic courses will be conducted in our SITRAIN
of India including North/South/West/East
Training Executors (STE's).
• Kindly contact us for the course contents and information
• Registration-Booking of seats for all clients at all Training
on prerequisite qualification / knowledge to attend the
Centres & Courses will continue to be made centrally at
courses
SITRAIN-KALWA by online & Email / Phone: +91 (022)
39663208 www.siemens.co.in/sitrain • Please note that the course fee is exclusive of service tax
E-mail: customer.training.in@siemens.com, You may also at present applicable rate of 18%. However any change in
contact nearest Siemens Regional Office, Customer Care, the tax rate structure will be accordingly applied
Regional Service Centres
• Please note that Rupee rates are applicable ONLY for
• Course fee is to be paid in advance (only on confirmation Indian Nationals sponsored by INDIAN COMPANIES.
of seat), in the form of Credit Card (Visa/Master) / DD / For Foreign Nationals or Indian Nationals sponsored
Cheque drawn in favor of SIEMENS LTD & payable at by FOREIGN COMPANIES rates will be quoted in EURO.
Mumbai or location of our Customer Care Office along Kindly contact us for more details on the same
with complete taxes and duties
• All the transactions (mainly commercial) like Training
• The course fee includes the course material, breakfast, Order, Payment should be done necessarily through your
lunch and tea. The training is non residential nearest Siemens Regional Office only. You may contact
us here at Kalwa Training Center for additional details.
• Since there are limited seats in each programme, the
seats are confirmed on 1st come 1st served basis. The • Training fees once paid are non-refundable
course timings are from 8.30 AM to 5.00 PM
• For complaints / queries / suggestions log in to
www. siemens.co.in/sitrain
60
SITRAIN – Training For Industry
Notes
61
SITRAIN – Training For Industry
Notes
62
SITRAIN – Training For Industry
Notes
63
SITRAIN Locations in INDIA