Professional Documents
Culture Documents
Instructions
1. Answers should be marked in OMR answer sheet only.
2. You should download the OMR sheet that what we have given.
3. OMR sheet should be scanned in a JPEG Format only. Answers must be clearly
visible; otherwise answers will not be evaluated.
4. 75 questions OMR for Engineering Stream test.
5. 50 questions OMR for General Studies.
6. In OMR answer sheet student should write following details :
ACE Registration Number:
Name of the Student:
Test Code:
(Registration Number can found in your login profile page)
7. Upload your answer (OMR) sheet on or before 03-05-2021 (6 PM), otherwise your
answer sheets will not be evaluated.
8. Results will be uploaded on 08-05-2021(6 PM). Check your results with the same
user and password.
9. Detailed solutions of test will be uploaded on 03-05-2021 (6 PM).
Email: hyderabad@aceenggacademy.com
Hyderabad | Delhi | Pune | Bengaluru | Chennai | Vijayawada | Visakhapatnam | Tirupati | Kukatpally | Kolkata | Ahmedabad| Kothapet
ESE - 2021 (Prelims) Offline Test Series OMR Answer Sheet for Engineering Stream
ACE Registration Number TEST ID
3 3 3 3 3 3 3 3 3 3 3 3
4 4 4 4 4 4 4 4 4 4 4 4 Candidate Sign
5 5 5 5 5 5 5 5 5 5 5 5
6 6 6 6 6 6 6 6 6 6 6 6
7 7 7 7 7 7 7 7 7 7 7 7
8 8 8 8 8 8 8 8 8 8 8 8 Invigilator Sign
9 9 9 9 9 9 9 9 9 9 9 9
0 0 0 0 0 0 0 0 0 0 0 0
A B C D A B C D A B C D A B C D
1 A B C D 21 A B C D 41 A B C D 61 A B C D
2 A B C D 22 A B C D 42 A B C D 62 A B C D
3 A B C D 23 A B C D 43 A B C D 63 A B C D
4 A B C D 24 A B C D 44 A B C D 64 A B C D
5 A B C D 25 A B C D 45 A B C D 65 A B C D
6 A B C D 26 A B C D 46 A B C D 66 A B C D
7 A B C D 27 A B C D 47 A B C D 67 A B C D
8 A B C D 28 A B C D 48 A B C D 68 A B C D
9 A B C D 29 A B C D 49 A B C D 69 A B C D
10 A B C D 30 A B C D 50 A B C D 70 A B C D
11 A B C D 31 A B C D 51 A B C D 71 A B C D
12 A B C D 32 A B C D 52 A B C D 72 A B C D
13 A B C D 33 A B C D 53 A B C D 73 A B C D
14 A B C D 34 A B C D 54 A B C D 74 A B C D
15 A B C D 35 A B C D 55 A B C D 75 A B C D
16 A B C D 36 A B C D 56 A B C D
17 A B C D 37 A B C D 57 A B C D
18 A B C D 38 A B C D 58 A B C D
19 A B C D 39 A B C D 59 A B C D
20 A B C D
40 A B C D
60 A B C D
TEST ID: 102
INSTRUCTIONS
1. IMMEDIATELY AFTER THE COMMENCEMENT OF THE EXAMINATION, YOU SHOULD CHECK THAT
THIS TEST BOOKLET DOES NOT HAVE ANY UNPRINTED OR TORN OR MISSING PAGES OR ITEMS, ETC.
IF SO, GET IT REPLACED BY A COMPLETE TEST BOOKLET.
2. You have to enter your Roll Number on the Test Booklet in the Box provided
alongside. DO NOT write anything else on the Test Booklet.
3. This Test Booklet contains 75 items (questions). Each item comprises four responses (answers). You will select the
response which you want to mark on the Answer Sheet. In case, you feel that there is more than one correct response,
mark the response which you consider the best. In any case, choose ONLY ONE response for each item.
4. You have to mark all your responses ONLY on the separate Answer Sheet provided. See directions in the Answer Sheet.
6. Before you proceed to mark in the Answer Sheet the response to various items in the Test Booklet, you have to fill in
some particulars in the Answer Sheet as per instructions sent to you with your Admission Certificate.
7. After you have completed filling in all your responses on the Answer Sheet and the examination has concluded, you
should hand over to the Invigilator only the Answer Sheet. You are permitted to take away with you the Test Booklet.
8. Sheets for rough work are appended in the Test Booklet at the end.
08. If the impulse response of a filter is 12. The transfer function of the cascade of 2
h(n) = (–0.8)n u(n) then what type of filter is filters is Hz 1 . If the impulse response of
this ?
one filter is h1 n 20.5n un, then the
(a) Linear phase Low pass filter
impulse response of II filter is
(b) Non-Linear phase Low pass filter
(a) 0.25, 0.5 (b) 0.5,0.25
(c) Linear phase High pass filter
(c) 0.5, 0.5 0.5n un
1
(d) Non-Linear phase High pass filter (d)
2
1
L1 2 2 ______
09. 13. Hilbert transform of
s s 1
x(t) = Cos(1t) + Sin(2t) is
(a) (t – sint). u(t) (b) (t + sint) u(t)
(a) Sin(1t) – Cos(2t)
(c) (t + cost) u(t) (d) (t – cost). u(t)
(b) Sin(1t) + Cos(2t)
(c) Cos(1t) – Sin(2t)
10. Which of the following impulse response of (d) Sin(1t) + Sin(2t)
LTI systems are both causal & stable?
n
1
(1) h n un
14. The note from a musical instrument
5 determined by the harmonic content of the
n
1 signal is
(2) h n u n
2 (a) Loudness
(3) h(n) = (5)n u(3 – n) (b) Pitch
(a) 1 only (b) 1, 2 and 3 (c) Timbre
(c) 1 and 2 only (d) 2 and 3 only (d) None
11. Let x(n) be a real & odd periodic signal with 15. Given Xz 2z 2 5z 5z 1 2z 2 .
(4) A causal IIR filter can never display the input is un and a steady-state response
24. Consider a causal LTI system with 27. Linear-phase systems have a constant
(a) Phase (b) Magnitude
frequency response H
1
. For a
3 j (c) Group delay (d) Angle
particular input x(t), the system observed to
28. What is the laplace transform of
produce output y(t) = e–3t u(t) – e–4t u(t).
(t2 – 3t + 2) ?
Find x(t).
(a) e–s (b) e–2s + e–3s
(a) e–3t u(t) (b) e–4t u(t)
(c) e–3s (d) e–s +e–2s
(d) e 3t ut
1
(c) e–2t u(t)
2 29. Consider a discrete time signal
x(n) = (0.5)nu(n). Let the DTFT of x(n) be
25. Consider the signal x(t) = 1, 0 < t < 2 X(ej). The time domain signal
0, otherwise corresponding to X2(ej) is
Given as input to the LTI system whose (a) (0.25)n u(n) (b) (n + 1) (0.25)n u(n)
impulse response is (c) (0.5)n u(n) (d) (n + 1) (0.5)n u(n)
h(t) = 1, 0 < t < 3
0, otherwise 30. The Laplace transform of the signal shown
below is
Which of the following statements is/are h(t)
true about the resulting output signal ?
1
1. y(t) = 1 for 1 t 2
2. y(t) is increasing in the interval 3 < t < 4
dyt
3. 0 for 2 < t < 3 t
dt 0 1
4. Maximum value of y(t) is 3
1 e s e s
(a) 3 only (b) 2 and 3 only (a) Hs
s2 s2 s
(c) 1 and 3 only (d) 1 and 4 only
1 e s e s
(b) Hs 2 2 2
26. We wish to compute the N point DFT of a s s s
100 Hz sinusoid x(t) sampled at 75 Hz. The 1 e s e s
(c) Hs 2
smallest value of N that prevents leakage is s2 s2 s
_______ samples 1 e s e s
(d) Hs 2
(a) 3 (b) 4 (c) 8 (d) 1 s2 s2 s
Regular Doubt clearing Sessions | Free Online Test Series Programme
Affordable Fee | Available 3M | 6M | 12M | 18M and 24 Months Subscription Packages
6 E & T Engineering
31. Synthesis filter banks are used for 35. Attenuation in dB is given as
(a) Separating a signal to several (a) 20 log 10 He j
frequency bands (subband signals) (b) Gain in dB
(b) Combining the processed subband (c) Both (a) and (b)
(d) 20 log 10 H e j
signals to one signal
(c) Removing the noise in the signal
(d) Removing the image frequencies
36. The Laplace transform of the signal shown
32. The number of Butterfly structures in below is
(a) 32 (b) 5
e–2t
(c) 16 (d) 8
t
33. The transfer function 0 1
z2 1
Hz represents
2z 1 C 1
z2 (a) 2
C 1 1 C s2
__________ equaliser. 1
(b) 2
(a) Graphic (b) Shelving s2
(c) Parametric (d) All pass (c)
1
s2
1 e s 2 2
n
xt e j2 t
s
yt e j3t x n cos 2 is
4
If x1(t) = cos(2t), determine the
(a) 2
corresponding output y1(t) for system „S‟.
(b) 4
j3t –j3t
(a) e (b) e
(c) 8
(c) cos(3t) (d) cos(2t)
(d) Not periodic
Regular Doubt clearing Sessions | Free Online Test Series Programme
Affordable Fee | Available 3M | 6M | 12M | 18M and 24 Months Subscription Packages
7 ESE – 2021 (Prelims) Offline Test Series
38. According to the Parseval‟s theorem of 42. A 100 resistor is connected to the
secondary of an ideal transformer with a
x (n )
2
DTFT, energy E ______.
n turns ratio of 1 : 4. A 10 V rms, 1 kHz
1 1 voltage source is connected to the primary.
(a) X(e j ) d
2
2 j 2
(b) X ( e ) d
Find the voltage across 100 resistor.
(a) 2.5 V (b) 10 V
1
X(e ) d
2
(c) j
(d) X (e j ) d
(c) 40 V (d) zero volt
39. If a 3-phase slip-ring induction motor is fed 43. A 250 kVA, 11000 V/400 V and 50 Hz
from the rotor side with stator winding single-phase transformer has 80 turns on the
short circuited, then frequency of current secondary, the maximum value of flux is
flowing in the short circuit stator is (a) 11.5 mWb (b) 22.5 mWb
46. A transformer has a reactance drop of 4% Which of the above statements is/are
and a resistance drop of 3%. The maximum correct ?
voltage regulation is (a) 1 only (b) 1 and 2 only
(a) 4% (b) 5% (c) 2 and 3 only (d) 4 only
(c) 6% (d) 7%
49. Open circuit test of transformer is
47. A 20 kVA, 220/110V, 50 Hz, 1- conducted at
transformer has full load copper loss of 200 (a) rated flux (b) rated current
W and core loss of 112.5 W. At what kVA (c) reduced frequency (d) reduced voltage
53. Torque developed by the armature of a dc 58. Which one of the following is employed as
motor is proportional to which one of the a moderator by CANDU type of slow
following? thermal nuclear reactors?
(a) EbIa (b) Ia (a) water (b) heavy water
(c) Eb (d) Eb/ (c) graphite (d) beryllium
54. “A time-varying flux causes an induced 59. Air pollution due to smoke around a
electromotive force”. Which law does this thermal power station can be reduced by
statement represent? installing
(a) Ampere‟s law (a) induced draft fan
(b) Faraday‟s law (b) super heater
(c) Lenz‟s law (c) economizer
(d) Field form of Ohm‟s law (d) electrostatic precipitator
57. A 4-pole, 50 Hz single phase induction 62. What type of energy is wind energy?
motor has a slip of 5%. The speed of the (a) Renewable energy
motor will be (b) Non-renewable energy
(a) 1425 rpm (b) 1500 rpm (c) Conventional energy
(c) 1200 rpm (d) 800 rpm (d) Commercial energy
63. The electrolyte used in lead-acid cell is 68. A battery consists of 20 cells of 2 V each,
(a) H2So4 (b) NH4Cl having an internal resistance of 0.01 are
(c) Pbo2 (d) Pb charged from 50 V dc source. Calculate
the external resistance to be connected in
64. During discharging of lead-acid cell, both the circuit if the charging current is 2.5 A.
anode and cathode becomes ______ in (a) 2.6 (b) 3
colour. (c) 3.8 (d) 4
(a) whitish (b) yellowish
69. The phase sequence of an alternator is
(c) blue (d) red
RBY. The direction of its rotor rotation is
reversed. The phase sequence will be
65. Cells are connected in series to increase
(a) RBY (b) YRB
(a) the voltage capacity
(c) BRY (d) both a & c
(b) the current carrying capacity
(c) both (a) and (b)
Directions: Each of the next Six (6) items
(d) life of the cells
consists of two statements, one labelled as the
‘Statement (I)’ and the other as ‘Statement (II)’.
66. The process of applying a low rate charge
You are to examine these two statements carefully
to standby batteries for compensating open
and select the answer to these items using the
circuit losses is called
codes given below:
(a) Trickle charging
Codes:
(b) polarization
(a) Both Statement (I) and Statement (II) are
(c) local action
individually true and Statement (II) is the
(d) none
correct explanation of Statement (I)
67. Find ampere-hour efficiency of a battery (b) Both Statement (I) and Statement (II) are
when it is charged with a 36 A for 8 hours individually true but statement (II) is not the
at pd of 2.1 volts and discharged at 22 A for correct explanation of statement (I)
10 hours at pf of 1.8 V (c) Statement (I) is true but Statement (II) is
(a) 86% (b) 75% false
(c) 76.38% (d) 84% (d) Statement (I) is false but Statement (II) is
true
Regular Doubt clearing Sessions | Free Online Test Series Programme
Affordable Fee | Available 3M | 6M | 12M | 18M and 24 Months Subscription Packages
11 ESE – 2021 (Prelims) Offline Test Series
70. Statement (I): DC series motors are 74. Statement (I): A linear time-invariant
suitable for cranes. discrete-time system having the system
Statement (II): DC series motors provide function H(z) z is a stable system.
1
high starting torque. z
2
Statement (II): The pole of H(z) is in the
71. Statement (I): Synchronous motor is a
left-half plane for a stable system.
constant speed motor
Statement (II): Synchronous motor is not a 75. Statement (I): The discrete time system
self starting motor
described by y(n) = 2x(n) + 4x(n1) is
unstable, (here y(n) is the output and x(n)
72. Statement (I): The core-loss in a
the input)
transformer is independent of the load
Statement (II): It has an impulse response
current.
with a finite number of non- zero samples.
Statement (II): The core is made up of thin
laminations interleaved at the joint to avoid
air gaps.
Detailed solutions for this test will be uploaded on our website on 03-05-2021 at 6.00 pm.
This test results will be available on our website on 08-05-2021 at 6.00 pm.
Regular Doubt clearing Sessions | Free Online Test Series Programme
https://www.aceenggacademy.com/ese-2021-prelims-offline-test-series-2/
Affordable Fee | Available 3M | 6M | 12M | 18M and 24 Months Subscription Packages