Professional Documents
Culture Documents
Bird Antenna Cable Monitor ACM ACMI Series
Bird Antenna Cable Monitor ACM ACMI Series
1.3, 1.4, 1.5, 1.6, 1.7, 1.8, 1.9, 2.0, 2.1, 2.2, 2.3,
Alarm Set Point
2.4, 2.5 to 1 PHYSICAL
Dry, Form C, relay contacts, common, 7.6 in x 7.2 in x 1.06 in
Relay Contact Type Size (with connectors)
normally open, normally closed (192 mm x 183 mm x 27 mm)
Contact Rating 100 VDC @ 0.5A Weight Less than 2 lb (0.9 kg)
Visual Alarm Red LED will illuminate to indicate alarm
VSWR set point exceeded, response time CERTIFICATIONS
Stimulus
proportional to overload
EMC: European Standard EN 61326-1:1997 +
Local mechanical reset switch remote input Addendums A1: 1998 and A2:2001 -
Reset
(Reset if VDC is 0 to +0.8 volts) Electrical equip. for measurement
CE Safety: European Standard EN 61010-
Push to Talk +5/+24 VDC to activate
1:2001- Safety Requirements - Electrical
equip. for measurement, control and labora-
SYSTEM tory use - ECM Requirements
birdrf.com/products
Bird is not responsible for omissions or errors. Specifications subject to change without notice.
©2020 Bird n Antenna-Cable-Monitor-ACM-ACMI-Series-07102020
ACM & ACMI SERIES ANTENNA & CABLE MONITOR
– – – – –
Model (power range) Frequency Range RF Input Connector RF Output Connector Monitor Port Connector Input Voltage
ACM (2.5 to 100 W) L0 = 108 to 144 MHz NM = N Male NM = N Male N = N Female L = ± (11 to 25) VDC
ACM 500 (12.5 to 500 W) L1 = 136 to 225 MHz NF = N Female NF = N Female T = TNC Female H = ± (36 to 72) VDC
L2 = 225 to 520 MHz DM = 7/16 DIN Male DM = 7/16 DIN Male B = BNC Female
M = 470 to 960 MHz DF = 7/16 DIN Female DF = 7/16 DIN Female
*H = 960 to 2400 MHz
– – – – –
Model (power range) Frequency Range RF Input Connector RF Output Connector Monitor Port Connector Input Voltage
ACMI (2.5 to 100 W) L0 = 108 to 144 MHz NM = N Male NM = N Male N = N Female L = ± (8 to 18) VDC
ACMI 500 (12.5 to 500 W) L1 = 136 to 225 MHz NF = N Female NF = N Female T = TNC Female M = ± (18 to 36) VDC
L2 = 225 to 520 MHz DM = 7/16 DIN Male DM = 7/16 DIN Male B = BNC Female H = ± (36 to 72) VDC
M = 470 to 960 MHz DF = 7/16 DIN Female DF = 7/16 DIN Female
*H = 960 to 2400 MHz
RACK SELECTION
ACM & ACMI SERIES RACK CONFIGURATIONS
Units
Part Number Description Compatible Models Supported
ACM-RACKU Rack Shelf, Includes 15 V Power Supply ACM-x-xxxxxL only 2
Rack Shelf, Requires Customer Provided 48 V
ACM-RACK ACM-x-xxxxxH only 2
Power Supply
ACMI-RACKU12 Rack Shelf, ACMI 12 V Desktop Supply ACMI-x-xxxxxL 1
ACMI-RACKU24 Rack Shelf, ACMI 24 V Desktop Supply ACMI-x-xxxxxM 1
ACMI-RACKU48 Rack Shelf, ACMI 48 V Desktop Supply ACMI-x-xxxxxH 1
Note: ACM-L2-DFDFTL-12SP can’t be used with rack mount option
birdrf.com/products
Bird is not responsible for omissions or errors. Specifications subject to change without notice.
©2020 Bird n Antenna-Cable-Monitor-ACM-ACMI-Series-07102020
birdrf.com/products
The RF Experts | USA Sales : 30303 Aurora Rd, Solon, OH 44139 | www.birdrf.com
Phone: +1 440.248.1200 / 866.695.4569 [Toll Free] | Fax: +1 440.248.5426 / 866.546.4306 [Toll Free]
Bird is not responsible for omissions or errors. Specifications subject to change without notice.
©2020 Bird n Antenna-Cable-Monitor-ACM-ACMI-Series-07102020