Professional Documents
Culture Documents
Questions Answers
1 High mercury & sulphur. Will these be Mercury Removal resin
adsorped onto the resin? Is it possible
For mercury removal we recommend
to have a resin to avoid this?
specialty resin DCHR 76.
In addition to the above, they have silver
Removal of Sulphur and Arsenic
and arsenic. Will these be taken up on
the resin with the gold? Generally DCHR 71 removes Sulphur and
Arsenic up to some extent. But if the
concentration of Sulphur and Arsenic is
high, we recommend specialty resin DCHR
78.
Both these resins can be used upstream of
the DCHR 71 resin to remove these ions
first.
2 De-sorption & regeneration: On the Both stages are most important.
PDS for DCHR-71, it refers to the
In gold adsorption stage, the chloride ion
-De-sorption step (thiourea & sulphuric is replaced by Sulphate (Sulphur),
acid), and the Arsenate (Arsenic) and other metal ions.
-Regeneration step (sodium hydroxide, In de-sorption stage, H2SO4 converts the
sodium chloride). remaining Chloride ion in to Sulphate.
Our clients informed us that currently Now the ionic form of the resin is changed
they only carry out the which must be regenerated into chloride
thiourea/sulphuric acid de-sorption, form for further gold adsorption.
and do not use the sodium
If the resin is not regenerated, the
hydroxide/sodium chloride at any time.
operating efficiency will decrease and
Please comment on this and advise if eventually the resin will not perform so
both steps are required. well.
Therefore the resin must be regenerated
with NaOH and NaCl solutions to
exchange all Sulphate, Arsenate, other
metal ions into chloride ions.
Name
5 Life expectancy: Can you advise The life expectancy is about three years.
typical life expectancy range normally
experienced in this type of application?
6 References: Can you provide any So far the DCHR71 has not been used in
customer references citing experience industry applications. The supplier is
using the product in these applications prepared to offer this product at reduced
in other countries, and perhaps some price for industry evaluation purposes.
reference contacts (eg: metallurgist) that
they can contact to discuss how they
used?
7 Delivery: What is the lead time for this Pre-shipment sample can be prepared
product for samples & ordering? within 10 days time. A lead time of 6-8
weeks is required for commercial
shipment.
8 Uniform particle size: Other alternative Particle Size In ion exchange process,
products in current use have a particle surface area is very important parameter
size of 0.95mm (+/- 0.5mm) diameter. on which an ion exchange and adsorption
What is the size distribution of the take place.
DCHR 71 resin?
Surface area is directly related to effective
size of particle which is calculated from
particles size distribution. Particle Size
Distribution of DCHR 71 ranges from 0.6
to 1.4 mm which gives an effective median
Page 2 of 3
Name
End of report
Page 3 of 3