Professional Documents
Culture Documents
Key Advantages:
Compact size for easy deployment
Weatherproof IP66 enclosure for harsh environments
Direct USB offload--no need for an adapter cable
Includes five smart sensor inputs
Hinged door and integrated mounting tabs
Runs for up to a year on four standard AA batteries
Compatible with HOBOware and HOBOware Pro software for logger setup, graphing and analysis
HOBO H21-USB Data Logger Specifications
Logger
-20° to 50°C (-4° to 122°F) with alkaline batteries
Operating Range -40 to 70°C (-40 to 158°F) with lithium batteries
5
Smart Sensor Connectors
Smart Sensor Data Channels Maximum of 15 (some smart sensors use more than one data channel; see sensor
manual for details)
100 m (328 ft) maximum
Smart Sensor Network Cable
Length
1 second to 18 hours
Logging Interval
Immediate, at interval, push button, or delayed start
Start Modes
Stop when full or wrap when full
Memory Modes
512 KB nonvolatile flash data storage
Memory
0 to 2 seconds for the first data point and ±5 seconds per week at 25°C (77°F)
Time Accuracy
Four AA 1.5 V alkaline batteries for operating conditions of -20° to 50°C (-4° to 122°F);
Battery Type four AA 1.5 V lithium batteries for operating conditions of -40 to 70°C (-40 to 158°F)
1 year, typical use (up to five sensors with 1 minute or greater logging interval)
Battery Life
USB 2.0 interface
Communication Type
4 minutes
Full Memory Download Time
Hinged door secured by one latch with eyelet for use with user-supplied padlock
Enclosure Access
Outer enclosure: Polycarbonate/PBT blend with stainless steel hinge pins; Gaskets:
Materials Silicone rubber; Cable channel: EPDM rubber
17.04 x 11.94 x 4.47 cm (6.71 x 4.70 x 1.76 in.) see diagrams in manual
Dimensions Padlock hole diameter: 0.58 cm (0.23 in.)
414g (14.6 oz.)
Weight
Weatherproof enclosure, NEMA 4X and IP66
Environmental Rating
The CE Marking identifies this product as complying with all relevant directives in the
European Union (EU).
HOBO® S-LIB-M003 Sensor
Solar Radiation (Silicon Pyranometer) Smart
Also available in a wireless model for use with the HOBOnet Field
Monitoring System.
Key Advantages:
Measurement range of 0 to 1280 W/m2 over a spectral range of 300 to 1100 nm
Plug-n-play smart sensor
Compatible with H21, H22, and U30 family loggers
HOBO S-LIB-M003 Sensor Specifications
Note: Light sensor bracket (M-LBA) and light sensor level (M-LLA) recommended
- The CE Marking identifies this product as complying with all relevant directives in the European Union (EU)
Copyright© 2021 Onset Computer Corporation. All rights reserved. Onset, HOBO, HOBOware are registered trademarks of Onset Computer Corporation. Other
products and brand names may be trademarks or registered trademarks of their respective owners. Patented technology (U.S. Patent 6,826,664)
HOBO® M-LBB
Light Sensor Bracket
The light sensor bracket is designed for use with tripods, masts, or
flat surfaces. Use to avoid obstructions and shadows that could
affect your PAR or solar radiation measurements. Includes leveling
screws.
Dimensions:
Bracket: reach 16.5", height 11", 1.38" wide
Mounting plate: h 3.38" x w 3"
HOBO® S-THC-M002 Sensor
Temperature/Relative Humidity (2m cable) Smart
Also available in a wireless model for use with the HOBOnet Field
Monitoring System.
Key Advantages:
Smart sensor
Works with all loggers that accept smart sensor inputs
Automatically communicates configuration data to the logger
HOBO S-THC-M002 Sensor Specifications
Measurement Range
Temp: -40°C to 75°C (-40°F to 167°F)
RH: 0-100%* RH at -40° to 75°C (-40° to 167°F); exposure to conditions below -20°C (-4°F) or above 95% RH may
temporarily increase the maximum RH sensor error by an additional 1%
Accuracy
Temp: ±0.25°C from -40° to 0°C (±0.45°F from -40° to 32°F); ±0.20°C from 0° to 70°C (±0.36°F from 32° to 158°F);
±0.25°C from 70° to 75°C (±0.45°F from 158° to 167°F)
RH: ±2.5% from 10% to 90% RH (typical), to a maximum of ±3.5% including hysteresis at 25°C (77°F); below 10% and
above 90% ±5% typical
Resolution
Temp: 0.02°C
RH: 0.01% RH
Drift
Temp: < 0.01°C (0.18°F) per year
RH: < 1% per year typical
The CE Marking identifies this product as complying with all relevant directives in the European Union (EU).
The UKCA Mark identifies this product as complying with all relevant directives in the UK Declaration of Conformity.
* Maximum 100% RH readings are only logged with RX3000 stations. The maximum readings for this sensor with U30 and
H21 stations are approximately 99.99%.
** A single HOBO station can accommodate 15 data channels and up to 100 m (328 ft) of smart sensor cable (the digital
communications portion of the sensor cables).
HOBO® RS3-B
Solar Radiation Shield
Use the RS3-B Solar Radiation Shield with HOBO external sensors
for improved temperature measurement accuracy in locations
exposed to sunlight. The small size and unobstructed airflow of this
shield provides a faster response to changing conditions than larger
radiation shields.
Time response: 2.5 times faster than the RS1 and M-RSA
Wind resistance: Tested in sustained winds up to 129 kph (80 mph), Tested in gusts up to 161 kph (100 mph)
Materials
Shield: ASA styrene (UV-stable)
Bracket: Glass-filled nylon (UV-stable)
Mounting hardware: Stainless steel and brass
Note: This shield does not protect sensors from light reflected from below the shield at some angles. For deployments over
reflective surfaces, consider using Onset’s RS1 or M-RSA Solar Radiation Shields.
Copyright© 2021 Onset Computer Corporation. All rights reserved. Onset, HOBO, HOBOware are registered trademarks of Onset Computer Corporation. Other
products and brand names may be trademarks or registered trademarks of their respective owners. Patented technology (U.S. Patent 6,826,664)
HOBO® M-TPB-KIT
Weather Station 2-Meter Tripod Kit
If you would like to buy the download only version, click the link
below:
Download-Only Version
Key Advantages:
Powerful software for logger management, data graphing, data analysis, and data export
Data Assistants and Real-Time Alarm Plug-ins provide advance data analysis, monitoring and notifications
Mac and Windows compatible (see system requirements)
Multi-Language Support ([custom:hoboware_supported_languages])
HOBO BHW-PRO Specifications
System Requirements:
HOBOware is not certified to run on Enterprise versions of any version of Windows and is not certified to run on
Server versions of Windows. It is certified to run on Windows 7 (Pro, Ultimate and Home Premium), 8 and 8.1 (Core,
Pro) and 10 (Home, Pro).
HOBOware Is certified to run on macOS 10.14 (Mojave), 10.15 (Catalina), and 11 (Big Sur).
HOBOware no longer needs a Java Runtime Environment on your computer. We include the JRE in HOBOware
itself.
The User Model row suggests some guidelines for using the Processor Speed and Memory table:
User Model 1 - Using HOBO Data loggers only, no data nodes - traditional desktop user
User Model 2 - Using HOBO Data loggers and up to 5 data nodes, 20 sensors
User Model 3 - Using HOBO Data loggers and up to 50 data nodes, 100 sensors
User Model 4 - Using HOBO Data loggers and up to 100 data nodes, 200 sensors
* Disk Space - Defining the disk space requirements for HOBOware depends on the proposed use. The table above
describes the disk space needed for a traditional desktop user, allowing for installation of the program and storage of data
files. For users of HOBO data nodes, the space requirements depend on a variety of factors, including the number of
nodes, the number of sensors, the frequency of data sampling, the longevity of deployments, and other factors.