Professional Documents
Culture Documents
CI/SfB
(47) Nh2
August 2005
Multichannel4
4mm thick section range and applications
• Gable Posts
• Mezzanine Floors
• Machinery Framework Building
• Door Frames to the Power of
Introduction
Gable Posts
Door opening
2
Section Range
Section Flange
Y
Multichannel4 Section Depth
450mm
400mm
350mm
300mm
Gauge Section
250mm 4mm X X Depth
205mm t
175mm
Section Flange
Multichannel4 Section Depth Y
450mm
400mm
350mm
300mm
250mm Gauge
4mm
205mm Section
175mm X X Depth
t
200mm 200mm
200mm Flange
200mm 200mm
130mm 200mm
130mm 200mm
Y
Compound Multichannel4 Section, web to web
Max. stress
Web Flange t Lip A (cm2) kg/m Ixx (cm4) lyy (cm4) Zxx (cm3) Zyy (cm3) rxx (cm) ryy (cm) Po N/mm2
175 130 4 13 25.04 19.66 1127.32 319.31 128.84 49.12 6.71 3.57 390
205 130 4 13 27.42 21.52 1645.86 312.90 160.6 48.14 7.75 3.38 390
205 200 4 20 32.96 25.88 2205.82 1036.53 215.24 103.65 8.18 5.61 390
250 200 4 20 36.52 28.66 3497.06 1009.73 279.82 100.97 9.79 5.26 390
300 200 4 20 40.48 31.78 5367.04 985.65 357.86 98.57 11.51 4.93 379
350 200 4 20 44.44 34.88 7743.04 965.91 442.50 96.59 13.20 4.66 368
400 200 4 20 48.40 38.00 10674.54 949.43 533.78 94.94 14.85 4.43 357
450 200 4 20 52.36 41.10 14211.06 935.53 631.66 93.55 16.47 4.23 346
3
Load Span Tables
4
Load Span Tables
5
Capacities
Ultimate Shear & BM capacity about the x-x axis for length between restraints or effective length
(cb = 1.0 in all cases)
ULS Ultimate BM for length between restraints or effective length m
Section weight Shear 1m 1.5m 1.8m 2m 2.5m 3m 3.5m 4m 4.5m 5m 6m 7m 8m 9m 10m 11m 12m
kgs/m kN kNm kNm kNm kNm kNm kNm kNm kNm kNm kNm kNm kNm kNm kNm kNm kNm kNm
L1750654 9.37 162.16 25.124 25.124 25.124 25.124 21.835 17.971 15.722 14.269 13.266 12.54 11.568 10.955 10.536
L2050654 10.31 189.96 31.317 31.317 31.317 31.317 26.542 21.958 19.277 17.547 16.358 15.5 14.361 13.65 13.169
L2051004 12.94 189.96 41.972 41.972 41.972 41.972 41.972 41.972 38.326 32.939 29.41 26.925 23.707 21.762 20.485
L2501004 14.35 231.66 54.179 54.179 54.179 54.179 54.179 54.179 49.137 42.366 37.899 34.75 30.68 28.229 26.629
L3001004 15.92 207 67.313 67.313 67.313 67.313 67.313 67.313 62.098 53.72 48.164 44.242 39.174 36.129 34.148 32.797 31.797 31.06 30.492
L3501004 17.49 177.43 80.791 80.791 80.791 80.791 80.791 80.791 75.658 65.703 59.069 54.379 48.318 44.678 42.314 40.314 39.518 38.647 37.977
L4001004 19.06 155.25 94.509 94.509 94.509 94.509 94.509 94.509 90.17 78.567 70.807 65.316 58.215 53.951 51.185 49.286 47.922 46.907 46.13
L4501004 20.63 138 108.352 108.352 108.352 108.352108.352 108.352 105.3 92.063 83.182 76.89 68.751 63.864 60.695 58.52 56.961 55.803 54.917
Bolt shear capacity based on 160N/mm2 for 4.6 and 375N/mm2 for 8.8 grade.
Bolt capacity in kN
Distance mm, from the centre line of the bolt
to the end of the connection in the direction of the force
12 16 20 24 36 48
Bolt Size Bolt capacity in kN
12 33.36 37.1 40.78 44.48 55.6 55.6
16 n/a 44.48 48.19 51.89 63.01 74.13
For the 4.0mm Multichannel4 with a minimum yield of 390N/mm2. Values are for connections with washers used under the bolt and
the nut. Bolts closer than their diameter to the connection edge in the direction of the force are not recommended.
Where only one washer or no washers are used the bearing values above should be reduced by 25%.
6
Structural Connection Holes
18 14 28
30 50
30 50 66 100
Service holes
These connection holes can be positioned at any point along the section
length and across the web, dependent on web size. Contact Kingspan for
advice. All dimensions in millimetres.
Flange Hole
18 14 28 14
7
Infill Gable Post
Single Post
Gable posts
Multichannel4 can be used as an infill gable post (to facilitate a
future gable extension) where a full portal frame is provided at
the gable.
The Multichannel4 infill posts can be used as single or
compound members dependent upon the load applied and
the required deflection limits.
The posts attach to the underside of the rafter using a single
plate cleat (supplied by others). Base cleats for attachment to
the slab or foundations can be supplied pre-assembled to the
Multichannel4 posts.
Cleat NB3
40 Multichannel4 Base Cleats
Stay RNA
Hot Rolled Angle
Ref MCH 000 Where 000 is channel depth eg. MCH 220
250
18mm dia. holes. 80 x 80 x10 L
32°
= =
100
80
50
325
Section depth – 20mm
8
Gable Infill Post Connection Detail Compound Post
Purlin
Cleader
Portal Rafter
Gable Post
50
Cleat NB3
Clearance for
portal deflection Stay RNA
258
Portal Rafter
32°
Gable Post
325
9
Mezzanine Floor Main Beams
100 CRS
10
20
6mm
10
Multideck-V2 on
Multichannel4 beams
Concrete slab
Multideck 60-V2/80-V2
composite metal deck
11
Cold Rolled Door Post
8000
Post header
Cleat MC4A/C or MC5A/C for flush face between main
Dock leveller truck structure
door side wall
Door header
Counterform holes for between post
flush fit
Post Header
MC6 Cleat
100 mm flange
Door Header post
MC6 Cleat
C/Formed holes in door
header for flush fit Clear door opening
3m door
opening
100
50
Cleat MC2A/c
98
12
Cold Rolled Door Post
Base Detail
Face fix to concrete slab
25 MCHxxx
Front Side
Elevation Concrete Slab Elevation Concrete Slab
Cast in
Bolted joint for
easy replacement 14ø Counter form
of post for M12
Counter form
holes for flush MC6A/C Cast into
fit on web floor slab
Cleat MC6A/C
Cast into floor
Front slab Side
Elevation Elevation
13
Cleats & Restraints
The full range of components avaiable from Kingspan Material 3.2mm Galvanised Steel
L = multiples of 50mm,
Structural Products can be found in the Multibeam publication. 14 or 18mm dia. holes
Many of these components are suitable for use with
Multichannel4. 25
50 2 MC2 25
75x75 Angle
100 3 MC3 50 25
150 4 MC4
200 5 MC5
250 6 MC6
14
Rafter & Stanchion Restraints 2.4
Dim ‘A’
Channel Restraint
Ref SW 000
=
Manufactured from galvanised steel Varies*
strip. All holes 14mm dia. 35
=
*available at 135, 165, 195, 225, 265, 80
310mm.
Screwed Rods
Reference TR0000 where 0000 is Dim A.
Dim A plus 50
25 Dim A 25
15
Kingspan Structural Product Range
Structural Products
Space Systems