Professional Documents
Culture Documents
Stainless Steel Pump
Stainless Steel Pump
Single-Phase
The guide rail fitting system connects the pump to and from
Code
No. of
Cables
Cores ´ mm2
Outer Dia.
mm
Material the piping easily just by lowering and hoisting the pump, Pumps
a 1 3 ´ 1.25 10.1 PVC allowing easy maintenance and inspection without the need to
enter the sump.
Three-Phase
Code
A
No. of
Cables
1
Cores ´ mm2
4 ´ 1.25
Outer Dia.
mm
11.1
Material
When the SFQ, BQ or CQ series is ordered with guide rail
fitting, the following accessories will come with the pump as
standard equipment (Attach ‘TOS’ to its model code.):
SQ/SFQ/BQ/CQ
C 1 4 ´ 2.0 11.8 PVC · Lifting Chain 5m (with Shackles)
E 1 4 ´ 3.5 13.9 · Guide Support (with Bolts & Nuts)
G 1 4 ´ 3.5 14.1 · Guide Hook (with Bolts)
I 1 4 ´ 5.5 16.8 · Duckfoot Bend
Chloroprene
4 ´ 3.5 14.1 · Guide Connector (with Bolts)
Rubber
K 3 3 ´ 3.5 12.9 · JIS 10kg/cm2 Flange (with Packing, Bolts & Nuts)
2 ´ 1.25 9.8
Note:
The material variation of these accessories is subject to the
pump material.
SPECIAL ACCESSORIES
■FLOAT SWITCHES
Tsurumi offers two types of float switches (liquid level sensors). A micro switch is incorporated in both types.
Model MC-2 is a heavy-duty type float Model RF-5 is an economy type float
switch with a shock absorber. Having switch which can detect upper/lower limit
equipped with a high grade micro water levels with single float. The snap
switch, the MC-2 assures trouble-free on-off action ensures stable operation in
operation in the liquid containing much clean or waste water containing suspend-
suspended solids and floating scum. ed solids or oil and fat.
Either of the two contacts, normally-open
or normally-close, can be selected as
required.
We reserve the right to change the specifications and designs for improvement without prior notice.
Your Dealer
H
Each pump incorporates an impeller which is A: Automatic operation S: Single-phase
designed to suit the pump’s application. The Number of poles of the motor Rated motor output in kilowatts
same material used in the pump casing is also
used for the impeller. (This model does not exist.)
1 2
50 80 mm (0.4∼3.7
•
kW) Semi-open Impeller 80 mm (5.5∼11 kW) Semi-open Impeller
■ Features ■ Features
Austenitic Stainless Steel for Wetted Parts Seal Pressure Relief System
At the metal components that come in contact with liquid are made of The SFQ-series of 5.5kW and over has a seal pressure relief
stainless steel casting (SCS14) or 316 stainless steel (SUS316). system. This system features an independent pump casing Mechanical Seal
separate form the oil casing in which the mechanical seal is
Lubricating Oil
Corrosion-resistant Mechanical Seal housed. Installed between these two components is an
The SFQ-series is equipped with a special mechanical seal. The seal intermediate chamber which is opened to the outside. Thanks to Shaft Sleeve
has superb corrosion resistance because silicon carbide is used for the this system, the mechanical seal is only subject to static
seal faces while the gaskets are made of fluoro-rubber. pressure (submergence pressure) with no pumping pressure Oil Seal
operating on the mechanical seal. Pump Casing
Powerful Pumping of Corrosive Liquids
The SFQ-series is ideal for the transfer and/or draining of corrosive Guide Rail Fitting Model Available Impeller
liquids in chemical and pharmaceutical plants, laboratories, etc. The SFQ-series of 5.5kW and over is available with guide rail
Suction Cover
fittings. Guide rail fitting accessories are made of stainless steel
casting (SCS14) or 316 stainless steel (SUS316). Pumps in this
series have a ‘TOS’ identifier on top of their model codes.
40 40
20 20 30 3 30 3
Total Head (m)
4 4 2 2
20 1 20 1
10 3 10 3
2 2 10 10
1 1
0 0 0 0
0 0.4 0.8 1.2 0 0.4 0.8 1.2 0 1.0 2.0 2.2 0 1.0 2.0 2.2
3
Capacity ( m / min ) Capacity ( m3 / min ) Capacity ( m3 / min ) Capacity ( m3 / min )
H
H
H
L L L
3 4
Channel Impeller Cutter Impeller
■ Features ■ Features
All Wetted Parts Made of Stainless Steel All Wetted Parts Made of Stainless Steel
As parts of popular B-series, Tsurumi has come up with BQ-series The CQ series, which belongs to the C (cutter pump) series, is built with
made of stainless steel casting (SCS13). The shaft, bolts and nuts are stainless steel casting (SCS13). The shaft, bolts and nuts are made of
made of 304 stainless steel (SUS304) or 316 stainless steel (SUS316). 304 stainless steel (SUS304) or 316 stainless steel (SUS316). It is
It is suitable for pumping wastewater containing solids and corrosive suitable for pumping wastewater containing corrosive liquid and/or fibrous
substances. material.
15 15
15 7 15 7
Total Head (m)
0 0 0 0
0 1.0 2.0 0 1.0 2.0 0 0.5 1.0 1.5 1.8 0 0.5 1.0 1.5 1.8
3
3
Capacity ( m / min ) 3
Capacity ( m / min ) Capacity ( m / min ) Capacity ( m3 / min )
H
H
H
H
L L L L
5 6
■CABTYRE CABLE CODE REFERENCE GUIDE RAIL FITTING SYSTEM Submersible
Single-Phase
The guide rail fitting system connects the pump to and from
Code
No. of
Cables
Cores ´ mm2
Outer Dia.
mm
Material the piping easily just by lowering and hoisting the pump, Pumps
a 1 3 ´ 1.25 10.1 PVC allowing easy maintenance and inspection without the need to
enter the sump.
Three-Phase
Code
A
No. of
Cables
1
Cores ´ mm2
4 ´ 1.25
Outer Dia.
mm
11.1
Material
When the SFQ, BQ or CQ series is ordered with guide rail
fitting, the following accessories will come with the pump as
standard equipment (Attach ‘TOS’ to its model code.):
SQ/SFQ/BQ/CQ
C 1 4 ´ 2.0 11.8 PVC · Lifting Chain 5m (with Shackles)
E 1 4 ´ 3.5 13.9 · Guide Support (with Bolts & Nuts)
G 1 4 ´ 3.5 14.1 · Guide Hook (with Bolts)
I 1 4 ´ 5.5 16.8 · Duckfoot Bend
Chloroprene
4 ´ 3.5 14.1 · Guide Connector (with Bolts)
Rubber
K 3 3 ´ 3.5 12.9 · JIS 10kg/cm2 Flange (with Packing, Bolts & Nuts)
2 ´ 1.25 9.8
Note:
The material variation of these accessories is subject to the
pump material.
SPECIAL ACCESSORIES
■FLOAT SWITCHES
Tsurumi offers two types of float switches (liquid level sensors). A micro switch is incorporated in both types.
Model MC-2 is a heavy-duty type float Model RF-5 is an economy type float
switch with a shock absorber. Having switch which can detect upper/lower limit
equipped with a high grade micro water levels with single float. The snap
switch, the MC-2 assures trouble-free on-off action ensures stable operation in
operation in the liquid containing much clean or waste water containing suspend-
suspended solids and floating scum. ed solids or oil and fat.
Either of the two contacts, normally-open
or normally-close, can be selected as
required.
We reserve the right to change the specifications and designs for improvement without prior notice.
Your Dealer