Professional Documents
Culture Documents
Objective:
To lay down a procedure for cleaning of shrink wrapping machine.
Scope
This SOP is applicable for cleaning of shrink wrapping machine in production
area.
Responsibility
Production operator / technician – responsible for cleaning of machine.
Accountability
Production Head shall be accountable for the compliance of SOP.
Abbreviations
SOP : Standard Operating Procedure.
Remove the shrink film roll from the film roll holder of the machine
Remove the shrink film pieces if any, observed from the sealing platform.
Destroy & dispose off the collected shrink film pieces as per SOP.
Clean the film roll holder, package platform, sealing platform & tunnel conveyer
with the help of compressed air & check that there is no dirt & dust on the
machine.
Clean the machine outer surface and their parts – L sealer bar, package platform,
sealing platform, film roll holder, sealing pad, magnet, trolley lags, shrink
tunnel & tunnel conveyer with the help of dry lint free wipe.
Clean any plastic residue from the sealing wire by using copper brush
immediately after the sealing wire heated, by pressing “CLEAN” function key.
Wait till the machine cool down & clean the loose residue by using lint free cloth.
Clean the machine with lint free cloth soaked in purified water & after that wipe
with lint free dry cloth to remove any remnant moisture.
Operator wear protective gloves for safety purposes during the cleaning process
of the machine.
Record the details of operation, cleaning and preventive maintenance of the shrink
wrapping machine in equipment logbook as per SOP. .Get the details checked
by the Production officer/supervisor.
Distribution
Master copy – Quality Assurance
History
– 00 New SOP
END OF SOP