BILL No. 7.2.10 - EXTERNAL FINISHES BILL OF QUANTITY - SCHEMATIC DESIGN STAGE Item Description Quantity Unit Rate Total (SAR)
A This bill section is only applicable for Type A block. Note
SECTION J - FINISHES
External wall finishes
B All the quantities for external wall finishes measured as
surface area of vertical and horizontal surfaces (including top of up stands, parapets walls, soffits etc.) shown on detail architectural drawings. Note
C EIF system consisting of 110mm polystyrene insulation to
have a finish that includes a base coat of fibreglass reinforced mesh embedded in cementitious adhesive and top coat of acrylic paint 649 m2
D Riyadh stone cladding ; To planters 222 m2
E Cement based external render ; To parapet wall 250 m2
External roof finishes
F Roof finishes 541 m2
G Roof finishes ; To upper roof 159 m2
H Skylight 3100x6200 1 nr
External floor finishes
J Cement and sand screed to receive external tiles floor
finish 223 m2
K External floor finishes; To Terrace 160 m2
L External floor finishes; To entrance/walkway 63 m2