No 1 2 1 Total weight of aggregate sample filling the 300g 310g 305 cylindrical measure = W1g 2 Weight of aggregate passing 2.36 mm sieve 80g 83g 81.5 after the test = W2g 3 Weight of aggregate retained on 2.36 mm sieve 219g 225 222 after test = W3g 4 Difference in weight = W1 – (W2+W3)g 1g 2g 1.5 5 Aggregate impact value = percent fines = 26.66% 26.77 26.715% 100W2/W1 %
Aggregate Crushing Test
Where, W₁ = Total weight of dry sample W₂ = Weight of the portion of crushed material passing through 2.36 mm IS sieve
W₁ = 3.96 kg W₂ = 0.66kg
Aggregate Crushing Value = 16.6 %
Los Angeles Abrasion Test
Test value and calculation Test number Average 1 2 Weight of sample, W1 g 5000 5000 5000 Weight of sample after abrasion test retain on 1.7mm test 4055 4041 4048 sieve, W2 g Los Angeles abrasion value = percentage wear = W1-W2/ 18.9% 19.18% 19.04% W1 (100) Specific Gravity and water absorption Details Test number 1 2 Mean Weight of saturated aggregate and basket in the water, W1 g 253.6 255.6 Weight of basket in the water, W2 g 110 110 Weight of saturate surface dry aggregate in air, W3 g 411.6 413.6 Weight of oven dried aggregate in air, W4 g 408.5 409.3 2 Specific gravity= W4/W3-(W1-W2) Apparent specific gravity= W4/ W4-(W1-W2) Water absorption = (W3-W4) 100/ W4