Professional Documents
Culture Documents
net/publication/264045564
CITATION READS
1 9,236
4 authors, including:
SEE PROFILE
Some of the authors of this publication are also working on these related projects:
All content following this page was uploaded by Mirza HYDER ALI Baig on 20 July 2014.
There is a growing concern that the pottery making is in the path of extinction one of the main
project is to revive this dying industry. This work begins with survey justifying the need for the product. It
is identified that a pottery making machine which has the capacity to produce the pot. To bring needed
attention to the subject of product design and enable researchers to better investigate design issues, the
author introduces a conceptual model and several propositions that describe how the form of product
relates to consumer responses. With literature survey and field visits, different pottery techniques and
process involved in pottery making techniques is understand. With the knowledge acquired, basic
requirement list that the product must prepare. Different concept is made and evaluate, the main aim of this
project is to focus on the customer requirements, detailed design of the product by using software pro/E
and analysis ANSYS
Keywords: Pottery making machine, Customer requirements, Concept’s, Detailed design, Pottery
making techniques, New product design and development.
1 Introduction:
Pottery is made by forming a clay body into objects of a required shape and heating them to high
temperatures in a kiln which removes all water from the clay, which include reactions that lead to
permanent changes including increasing their strength and hardening and setting their shape. A clay body
can be decorated before or after firing. Prior to some shaping process, clay must be prepared. Kneading
helps to ensure even moisture content throughout the body. Air trapped within the clay body needs to be
removed. This is called de-airing and can be accomplished by a machine called a vacuum pug or manually
by wedging. Wedging can also help produce even moisture content. Once a clay body has been kneaded
and de-aired or wedged, it is shaped by a variety of techniques. After shaping it is dried and then fired.
Potters struggle to earn sustainable incomes and left their families from low standards of living.
Through they wish that their children will carry forward the craft, they recognize that the young generation
is disengaged. Youth are looking elsewhere for what they consider to be more profitable and respected
careers. Many have already left the craft to join the construction industry.
Artisans are also challenged by changing ecology and environmental policies. Pottery has
traditionally been a locally and environmentally sustainable craft; the sources of all the natural resources
needed to turn earth into pottery are local. Local clay local white clay, water, thorns and black stone have
not only been found in potter’s villages for centuries but are also free of cost.
Today changing ecology and environmental policies are inhibiting artisans’ access to these
resources. As any town develops, industries and residences are being built on sources of quality clay.
Water scarcity poses a significant challenge as artisans are forced to buy water not only for household
purposes, but also for their craft. As local resources are depleted, artisans must travel great distances to
access the materials which were once a part of the local landscape.
The market for the pottery and earthenware has changed dramatically in the last few decades.
Plastic and metal continue to replace handcrafted pottery. As the market decreases, potters are increasingly
dependent on traders who hold the power to determine costing and production. Artisans must look to new
241
markets and develop new products and designs to competitively meet these market’s demands. Potters also
struggle with a lack of infrastructure needed to bring their goods to market. Workshops are inadequate and
transportation is inefficient resulting in unnecessary breakage and waste.
Contributions to 2013 International Conference on Sustainable Innovation and Successful
Product Development for a Turbulent Global Market, December 16-18, 2013, Chennai, India are to be in
American English. Authors are encouraged to have their contribution checked for grammar. American
spelling should be used. Two spaces MUST be left after the period of each sentence. Abbreviations are
allowed but should be spelt out in full when first used. Integers ten and below are to be spelt out. Italicize
foreign language phrases (e.g. Latin, French). Authors are required to submit their manuscripts both in
MS-WORD and PDF formats, and should check their formatting before submission.
242
lifestyle, has opted for more education and office jobs in neighboring cities. Through the pay is less, they
find the prestige awarded them by society more appealing then the occupation of their fathers. Pottery-
making in this village seems destined for extinction”.
2.2 Potential users:
There can be various possible users for our portable water purifier, through our primary target
is younger generation in various pottery making villages. A single machine would give employment to
them. The product made out of this pottery making machine can be used in rural, semi urban and urban
areas also. The product can also be used by those people in urban areas who are facing shortage of
electrical.
3. CONCEPT GENERATION AND SELECTION
Design and develop a semi manual device that has capability to produce pot with axis symmetric
shape, ergonomic and economically viable.
3.1 Concept generation:
Following are the concepts that are generated based on the requirement list
3.1.1 Idea: Throwing stick:
Throwing sticks are being used traditionally in pottery making. The idea was to get the manual
process automated through mechanism. The table and 2 hp .motor were required, and speed controller al so
required for controlling the speed of the motor. to suit the speed that is required for making pots ,and to get
the necessary torque at the turn table, gear box was fixed to the table.
3.1.2 Requirement list of the product:
Based on the study and survey with the potters it was found that the product should incorporate
the following.
• Capacity to produce any axis symmetric shape
• Semi automatic
• Economically viable for the targeted customers
• Ergonomic
• Visibility
• Efficiency
3.1.3 Dimensional requirements and parameters to control:
Based on the requirement list, dimensional requirement of the pot was decided so it could be
used as water pot.
• Height of the pot - 300 – 350 mm
• Diameter of the pot – 200 – 250 mm
• Thickness of the pot - 10 -15 mm3
3.1.4 Parameters to be controlled:
• Controlling the inner profile
• Controlling the outer profile
• Thickness of the pot
• In all concepts ,we have used the die to get the outer profile
243
Figure (3.1): Throwing stick motion can be automated with the help of pantograph
3.1.5 Advantages:
• Reducing human effort.
• Saving time
• Very easy to handle from one place to another place.
• Good quality of the products produced.
3.2 PANTOGRAPH MECHANISM:
Pantograph is an instrument used to reproduce to an enlarged or a reduced scale and as exactly
as possible. The path is described by a given point. It consists of a joined parallelogram ABCD as shown in
the figure It is made up of bars connected by turning pairs. The bars BA and BC are extended to O and E
respectively such that
OA/OB = AD/BE.
Thus for all the relative positions of the bars the triangles OAD and OBE are similar and the
points O,D and E are in one straight line. It may be proved that point E traces out the same path as
described by the point D.
From similar triangles OAD and OBE we find that
OD/OE = OD’/OE’.
A little consideration will show that the straight line DD’ is parallel to the straight line EE’.
Hence if O is fixed to the frame of machine by means of turning pair and D is attached to a point in the
machine which has rectilinear motion relative to the frame, then E will also trace out a straight line path.
Similarly, if E is considered to move in a straight line, then D will trace out a straight line parallel to the
former.
Pantograph is mainly used for the reproduction of the areas and figures such as maps, plans
etc......, on enlarged reduced scales. It is sometimes used as an indicator rig in order to reproduce to a small
scale the displacement of the crosshead and therefore of the piston of a reciprocating steam engine. It is
also used for the guide cutting tools. A modified form of pantograph is used to collect power at the top of
electric locomotives.
244
Figure (3.2): The pantograph mechanism
Major headings, including sub-headings and sub-sub headings should be typed in
boldface in Title Case. Leave 6 pt additional space after the major heading, and one line space
before.
4. DESIGN AND ANALYSIS OF THE POTERY MAKING MACHINE
245
Figure (4.1): drafting of the pottery making machine
4.1 BILL OF MATERIALS:
S.No BILL OF MATERIALS TYPE QUANTITY
1. Spindle C.I 1
2. Die C.I 1
3. Frame C.I 1
4. Base C.I 1
5. Frame Mechanism Wood 1
6 Pot Clay 1
Table (4.1): Bill of materials
4.1.1 Material properties:
Material cast Iron Clay Teak Wood
Young’s Modulus (E) (N/mm2) 170000 10-20 10500-15600
Density (ȡ) Kg/m3 6800-7800 1746 630-720
Poisson Ratio 0.21-0.26 0.2-0.3 0.2-0.3
Yield Strength (N/mm2) 60 15.5 48 -55
Hardness (BHN) 1800 2.5 950
Table (4.2): Mechanical Properties for Different Materials
4.2 MODELING:
After completions of the design calculation the design is safe then we go for next step to model
the pottery making machine, which is done by using Pro-E Wildfire 4.0V.
246
Figure (4.2): Pro-E Model of Pottery Making Machine
4.3 ANALYSIS:
After completions of the Modeling for design verification we go for next step to structural
analysis of a pottery making machine, which is done by using Ansys 11.0V. Structural analysis to find
critical stress areas, Induced stresses in each component, Displacement etc.
247
After doing research and observing the market demand for the pot makers, we believe that it
is feasible to launch it into the market targeting not only for the pot makers but also those handy craft
workers.
We have highlighted the growing number of pottery makers, which proved to be a potential
market share in the future and even currently. We learnt a lot about the likes and interests of pottery
making people and also challenging to detail out all the various parts and components of the product.
So finally this project explores the area of mobility for the pottery making peoples improving the
aesthetics and usability of a clay pots and also identifying various ergonomic functional and usability
issues. Then this product is also attracts the economically poor people and middle class people because
cost is less when compared to existing products.
7 REFERANCES
[1]. Karl T Ulrich, Steven D Eppinger, Anita Goyal, “Product Design & Development” 4th/e SIE,
Tata McGraw Hill Education Pvt Ltd, New Delhi, India, (2009).
[2]. Felix Singer & Sonja S Singer, "industrial ceramics", Chapman and hall, London, (1963).
[3]. Anderson turner, "pottery making Techniques", American ceramic society, Westerville, Ohio
(2004).
[4]. D.Meemeduma, "modifications to a pottery wheel" e Appropriate Technology Journal Vol. 4
No 3. Nov 1977.
[5]. Robert gracy,"improvement in the machine for the manufacturing of pottery ". United States
patent 192823, July 10 1977.
[6]. Roberto De Nova, "Tracer valves for copying machines", United states Patent 37702387, Nov
6 1973.
[7]. C.X.F. Lam, X.M. Mo, S.H.Teoh, D.W.Hutmacher,"Scaffold development using 3D printing
with a starch-based polymer”, Materials science and Engineering C 20 (2002).
[8]. RK BANSAL. “A Text of engineering mechanics” Analysis of perfect frames C 6, Pages
114-145, Lakshmi Publications, New Delhi, India, 3ED, (March 2004).
[9]. RS KHURMI. JK GUPTA. A Text book of “machine design” simple stresses in machine
parts. Pages 87-119, Eurasia Publishing House,(2005).
248