Professional Documents
Culture Documents
INSTALLATION INSTRUCTIONS
ORDERING INFORMATION
ESCALE Wall-hung Toilet.........................................K-19045T ..............................................K-19045T
Includes seat ........................................................K-4417T .......................................................K-4417T
NOTES
528137
ã , 2006
1054932-T01-C -1-
ã Copyright Kohler China Ltd., 2006
ROUGHING-IN
P-trap K-19045T Unit: mm
:
35
60
55
315 350
102 400
340
305
205
35
160 433
335
600
Fig.#1
1
INSTALLATION
1. INSTALL THE TANK
1) Turn the water supply off before installing the new toilet.
2) Install the concealed tank system in wall before decorating
the wall.
3) Install the tank system per tank's installation instructions.
Recommended tanks
Kohler Inwall Tank 6284T-NA (With iron rank)
And Inwall Tank cover 6283T-**
1.
1)
2)
3)
6284T-NA ( )
6283T-**
Fig.#2
2
1054932-T01-C -2-
2. SET THE SPACING OF THE BOWL 2.
After you install the tank, be careful to set the spacing of set
aside the length for carrier studs and tighten nut. The bowl on 3
wall according to the dimensions as shown. See Fig. #3.
Unit: mm
:
Carrier Stud
230
35
10
305
340
205
Nut
Fig.#3
3
Inlet
Outlet
Fig.#4
4
1054932-T01-C -3-
4. INSTALL THE NEW TOILET 4.
1) Install the accessory kit into the installing hole. 1)
2) Place the new toilet on the wall through the carrier. 2)
3) Use wrench to tighten accessories and level the toilet. 3)
Then finish fixation.
4) Insert the cap into installing hole. See Fig. #5. 4) 5
10
Fig.#5
5
,
5. Apply sealant to make sure the bowl s edge seals to the 5. 6
wall. See Fig. #6.
Fig.#6
6
1054932-T01-C -4-
6. INSTALL SEAT WITH HARDWARE PROVIDED. 6.
See Fig. #7. 7
Fig.#7
7
CONSUMER RESPONSIBILITIES
When cleaning up after installation, do not use abrasive
cleansers, as they may scratch and dull the toilet surface.
Use warm water and a liquid detergent to clean the surface.
Most toilet bowl cleaners are not harmful to the vitreous china
surface of the toilet bowl. Please follow the bowl cleaner
manufacturer is instructions carefully.
1054932-T01-C -5-
LIMITED ONE-YEAR WARRANTY ( )
(FOR CHINA MAINLAND ONLY)
Plumbing Fixtures and Fittings Limited
One-year Warranty
Kohler plumbing fixtures and fittings are warranted to be free
of manufacturing defects.
1054932-T01-C -6-
ESCALE
SERVICE PARTS PAGE
Hinge Lock
Hinge Base
1061512
Screw, Short
1061513
Washer
1061514
Anchor
K-4417T 1061515
Escale Seat Lock Nut
1049611-CP
Wall Installation Kit
**
** Color code must be specified when ordering.
1054932-T01-C -7-