Professional Documents
Culture Documents
Use: Paints
Distributor:
Contact: 736-4916
Ingestion: Will cause upset feeling. Induce vomiting to prevent any internal
damages.
Contact with Eyes: Wash eyes with cold water for 2 minutes, if contacts are on
remove them and wash eyes. See medical attention after.
Skin Contact: Remove contaminated clothes then wash area with water. No
damage done by liquid to skin.
Administer first aid treatment as soon as possible if any of the following events
above take place and contact the nearest local health facility for further medical
help.
Flammability: High
Specific methods of handling: Use gloves and gas mask when using thinners.
Section 6: Accidental Release Measure
Spill Response: Contain leakage and use absorbents to remove liquids .Carefully
wash area to remove the chemicals. Switch off any electrical device for large spills
to avoid fire.
Handling: Handle with care. Use gloves and gas mask when used in a closed room.
Keep away from using by open flame or hot works.
Storage: Rotate stock regularly, store in cool place, and do not stack goods more
than 10 boxes high. Keep out of reach of children. Store away from hot works area.
Engineering Controls: General room ventilations are adequate and smoke dectors
Colour: Varied
Odor: High
ph of solution: 6.4-7.3
Stable: Yes
Materials to avoid: Avoid mixing directly with any other cleaning chemicals.
Disposal method: Comply with all state laws and regulations with respect to
disposal of chemical waste. Wash storage containers properly and contact the
government chemical waste removal companies to properly dispose of the
unwanted waste.
Ensure that the storage area is clean and the temperature is not above 40oC. Liquid
must be transported in sealed containers.
0- None
1- Slight
2- Moderate
3- High
4- Extreme
The information provided in this Material Safety Data Sheet is correct to the best of our knowledge, information
and belief at the date of its publication. The information given is designed only as a guidance for safe handling,
use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality
specification. The information relates only to the specific material designated and may not be valid for such
material used in combination with any other materials or in any process, unless specified in the text.