Professional Documents
Culture Documents
To switch between modes simultaneously press and hold To enter shifter calibration mode, simultaneously press and
the buttons + , highlighted below, for one second. hold the [TUNING MENU] + buttons, as highlighted below.
The wheel base LED indicates the active mode: For the detailed process read the shifter manual.
- Green means Xbox One mode
- Red means PC mode
- Blue means PS4TM mode*
- Purple means compatibility mode*
TUNING MENU
SETTING
QuickGuide
EN
McLaren GT3 onto wheel base axis change between modes: 16 Shifter paddle R (up) 5 RB
Turn the steering wheel top side down to see the bottom D Mappable analog axes 15 16
side of the clamp ring to follow next step below. paddles can be mapped as two additional axes
3 8
4 9
** Clutch bite point feature (for race start)
4 In mode A this feature is activated anytime when both paddles are pressed to at least
17 18
5%.
Push steering wheel • Press both paddles all the way in. The display will show 100%.
5 10
• Release one paddle while keeping the other fully pressed.
until the screw hole The display now shows the percentage value of the released paddle while the
matches with hole on car’s clutch is still fully pressed.
wheel base axis. • Set the released paddle to the percentage value where your car’s clutch starts to
bite (evaluate in earlier tests). 14
• As soon as the virtual start lights turn to green, completely release the fully
pressed paddle and the clutch is immediately at the bite point, held by the other
NOTE: For a more detailed and hands on
IMPORTANT: Never use without screw! paddle. explanation, see our video tutorials on YouTubeTM.