Professional Documents
Culture Documents
FIELD ENGINEERING
1. PART 1 - GENERAL
1.01 SECTION INCLUDES
2. PART 2 - PRODUCTS
(Not Used)
3. PART 3 - EXECUTION
3.01 EXAMINATION
01050-1
Field Engineering
Replacement of project control points shall be
based on original survey control points.
3. Establish and maintain the required number of
permanent benchmarks on the job site as directed by
the Engineer. Benchmarks shall be located from and
referenced to data established from survey control
points. Record benchmark location, with horizontal
and vertical data, on Project Record Documents.
A. General
B. Surveyor's Log
1. Maintain a Surveyor's Log of control and other
survey work. Surveyor's Log shall be made available
for the Engineer reference.
2. Record deviations from required lines and levels,
and advise the Engineer when deviations that exceed
indicated or recognized tolerances are detected.
Contractor shall record on Project Record Drawings
deviations that are accepted and not corrected.
C. Site Works
1. Locate and lay out works, fill and topsoil
01050-2
Field Engineering
placement, slopes and invert elevations by
instrumentation and similar appropriate means.
2. Prior to Substantial Completion, prepare a final
property survey showing significant features (real
property) for the Project. Include on the survey a
certification, signed by the Surveyor, to the
effect that principal metes, bounds, lines and
levels of Project are accurately positioned as
shown on survey.
END OF SECTION
01050-3
Field Engineering