Professional Documents
Culture Documents
i02649500
Removal Procedure
Start By:
a. Release the hydraulic system oil pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release".
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, all hoses and all tubes.
This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
View Image
https://127.0.0.1/sisweb/sisweb/techdoc/content.jsp?calledpage=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&relcalledp... 10/23/2021
Service Information System Page 2 of 3
Illustration 1 g01329992
View Image
https://127.0.0.1/sisweb/sisweb/techdoc/content.jsp?calledpage=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&relcalledp... 10/23/2021
Service Information System Page 3 of 3
Illustration 2 g01329994
2. Disconnect hose assemblies (2) and (5). Remove bolts (3) and gear pump (4).
Copyright 1993 - 2021 Caterpillar Inc. Sat Oct 23 10:58:35 UTC+0300 2021
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/content.jsp?calledpage=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&relcalledp... 10/23/2021