Professional Documents
Culture Documents
GIS DataPRO TM
Version 2.0
English
Contents
1. Introduction .............................................................................................................................. 1
1.1 License Agreement.................................................................................................................................................. 2
1.2 Software Protection ................................................................................................................................................. 2
2. Installation................................................................................................................................. 3
2.1 Installation Instruction ............................................................................................................................................ 4
2.2 Uninstalling GIS DataPRO ...................................................................................................................................... 5
2.3 Starting and Exiting GIS DataPRO ........................................................................................................................ 6
Language: ______________________________________________
Introduction 1
Installation 3
Before installing GIS DataPRO it is necessary to first From the WindowsTM Start bar, click Programs.
uninstall any previous versions. Unique database Select Leica GIS DataPRO.
information such as Projects, Waypoint Files and Click Uninstall GIS DataPRO.
Coordinate Systems should not be deleted. However Confirm with Yes. All GIS DataPRO files and
all files originally created by GIS DataPRO may be settings will be removed permanently from the
overwritten. Therefore users are urged to backup any hard disk.
important data contained within the program
directory.This will in no way harm performance of this
or any application, but will take up a considerable
amount of diskspace.
Arrow Keys
Context-Menu
Tabbed Views
Toolbar Tabbed-View
Toolbars allow you to organize the most frequently Tabs at the bottom of the Workspace allow you to
used commands the way you want to, so you can find quickly select the Project Manager, Feature
and use them quickly. You can easily customize Browser, or Waypoint Manager.
toolbars - for example, you can add and remove
buttons, create your own custom toolbars, hide or
display toolbars, and move toolbars.
Arrow Keys
The Arrow Keys are part of the Toolbar and are
designed to simplify the data processing procedure.
These keys will step you through the steps necessary
to export the data to your GIS. Please see chapter four
section 4.15, or consult GIS DataPRO’s on-line help for
more details.
Report-View
Explorer-View
Property-View
4. A Quick TTour
our of GIS DataPRO 14 GIS DataPRO v.2.0, En
4.2 Creating Projects
After data has been collected in the field using the Project dialog box. Choose a name for your
Leica GPS receiver, the raw GPS data will need to be project and type it into the space provided under
transferred to GIS DataPRO software. All collected GPS Project Name. This will create a directory where
data that belongs together can be organized in GIS all your GPS field data files will be stored. If you
DataPRO so that everything is stored in one common don’t name your project, GIS DataPRO will assign a
place, or single project. default project name of ‘Untitled’ to the project.
GIS DataPRO will open the last project or data set
Before transferring data to or from GIS DataPRO, it is used each time the software is run.
important to set up a project. You may choose to set up
and name your projects according to how you want A coordinate system must be assigned
your data to be stored. Some common methods of within GIS DataPRO before a project can be
storing data include by client, by project (specific work opened. See section 4.4 for more information.
area), or by date.
Double click on the Leica GIS DataPRO icon on
the desktop
4. A Quick TTour
our of GIS DataPRO 16 GIS DataPRO v.2.0, En
4.3 Creating Codelists
A codelist is an empty catalog, template, or database With the Codelist Manager open, some sample
designed for collecting features and/or codes (points, codelists will appear on the left hand side. Expand one
lines, and areas), and descriptive information about of the codelists by clicking on the plus next to one of
them. Codelists are used outside in the field when the the folders. Inside you will find features set up as
GPS data is collected. either points, lines, or areas. These samples can give
you an idea of how to set up features and attributes.
Before going into the field, try to visualize all of the
features you need to collect (lightpoles, fire hydrants,
trees, manholes, streets, land parcels, etc.). Will these
codes be classified as points, lines, or areas? (If you
encounter something in the field that you didn’t think
of, you can add that to the GS50 in the field.) Next,
think of anything you want to know about the data and
include that in your codelist as attribute data.
To create a codelist:
From the Tools menu, choose Codelist Manager.
4. A Quick TTour
our of GIS DataPRO 18 GIS DataPRO v.2.0, En
4.3 Creating Codelists (continued)
To add more codes: Note: New Attributes can also be added by clicking in
Select New Code from the Code menu. the blank row on the right hand side of the Codelist
Manager (looks like a spreadsheet).
4. A Quick TTour
our of GIS DataPRO 20 GIS DataPRO v.2.0, En
4.3 Creating Codelists (continued)
If your attribute is a pick list, (species, for example), Choose your symbol and press Insert.
click on the Attribute Values tab. Click the enter Set the symbols color and size in the appropriate
icon where it says Choice List. Enter the names of boxes and press OK.
the choices for your attribute values (elm, oak, fig, Repeat these steps for each code in the codelist.
for tree species, for example).
...\Leica Geosystems\GISDataPRO\Data\Codelists\
4. A Quick TTour
our of GIS DataPRO 22 GIS DataPRO v.2.0, En
4.4 Coordinate System Management
A basic functionality of the Global Positioning System while UTM is used primarily within the U.S.A., and
is that it is able to give coordinates at any point on the state plane is used at the local level (by counties, and
earth’s surface. To do this, GPS uses a geodetic cities).
coordinate system based on an ellipsoid. An ellipsoid
(also known as a spheroid) is a sphere that has been In addition, certain coordinate systems use certain
flattened or squashed. A point on the surface of the units and datums, which measure elevation. Generally,
earth read by GPS can be defined by using Latitude, Latitude and Longitude is measured in decimal
Longitude and ellipsoidal height. degrees, or degrees, minutes seconds, for example:
GIS DataPRO software allows for GPS data taken in 30O 28O 07.73O N (latitude)
WGS84 to be transformed into local coordinate 97O 49O 42.27O W (longitude)
systems. A Coordinate System may be attached to a
Project in GIS DataPRO. UTM coordinates are measured in meters, and State
Plane coordinates are measured in feet or meters. Each
A coordinate system is a reference system, or grid, datum gives a different representation of the earth’s
overlaid onto the earth’s surface. Coordinate systems shape. Latitude and longitude is measured in the
are used for referencing and recording locations on WGS84 datum, which stands for World Geodetic
earth. A Coordinate System provides the information Survey 1984. The UTM coordinate system is typically
necessary to convert coordinates to different measured in NAD83 datum, which stands for North
representations. There are many coordinate systems, American Datum, 1983; while State Plane can be
but three of the most common are: Latitude/Longitude, measured in NAD27 (1927), or NAD83. Either datum can
UTM (UniversalTransverse Mercator), and State Plane. be used with state plane, however NAD83 is more
Latitude/longitude is a worldwide reference system, accurate.
4. A Quick TTour
our of GIS DataPRO 24 GIS DataPRO v.2.0, En
4.4 Coordinate System Management (continued)
To create a new coordinate system, right click on the
plus sign and choose New from the menu. The New
Coordinate System dialog box will come up and
you will be prompted to name the new coordinate
system. Choose the Transformation, which is the
datum shift from the current coordinate system. If you
choose to work in the UTM coordinate system and you
need zone instead of projection, move your mouse
over the word Projection and left click. There should
be a check by the word Projection. Click on the word
Zone to change the menu choice from projection to
zone, and fill in the appropriate UTM zone for the
region you are working in. Finish out the box by filling
in the Geoid Model and CSCS* (see page 27) you
wish to use. Press OK.
Note: The geoid files that come with GIS DataPRO can
be loaded from: c:\program files\Leica Geosystems\
GIS DataPRO\geoid. You can choose from either the
North America or Standard folders. Navigate down
through these directories until you find an .exe file that
you can use. The file geoid99.exe under c:\program
files\Leica Geosystems\GIS DataPRO\geoid\North
America\Geoid99\ contains all geoids for North
America. When you apply this to your project, you can
compute orthometric height, or elevation data.
4. A Quick TTour
our of GIS DataPRO 26 GIS DataPRO v.2.0, En
4.4 Coordinate System Management (continued)
Projections are used to convert map coordinates when *CSCS = Country Specific Coordinate
transferring from a 3D surface to a 2D surface (globe to System. Several countries have produced
a map), or from one projection to another. To create a tables of conversion factors to directly
Grid Projection, right click on Projection and select convert between GPS measured coordinates
New. Enter Name, Type, False Easting, False given in WGS84 and the corresponding local
Northing, and Central Meridian. mapping coordinates, taking the distortions
of the mapping system into account. Using
To create a transformation, right click on Transform- these tables it is possible to directly convert
ations and click New. Name the coordinate system. into the local grid system without having to
Choose Ellip A, Ellip B, and Model. Two selections calculate your own transformation
are available – Classical 2D and 3D. 2D transform- parameters. Country Specific Coordinate
ations allow for a XY grid shift, rotation and scale (no System Models (CSCS Models) are an
z, or height). When you exit the Coordinate System addition to an already defined coordinate
Manager (File, Exit Coordinate System Manager), system, which interpolates corrections in a
any changes you have made, and whatever coordinate grid file and applies the interpolated
system you have selected will be saved and used by corrections. The extra step of applying these
GIS DataPRO. corrections can be made at different
positions in the coordinate conversion
In GIS DataPRO 2.0, you may create a Geoid Model process. Therefore different methods of CSCS
Field File based on user defined extent (See on-line Models are supported. (See on-line help for
help for more information). After the coordinate system more information on conversion methods)
and geoid have been saved, they can be transferred to
the sensor. The advantage to defining a Coordinate CSCS Models may also be used on the receiver in the
System with Geoid in GIS DataPRO before going into field. Go to Tools, Create a CSCS Model Field
the field is that you can then see true elevation readings in File menu and then upload the file using the Sensor
the field (vs. HAE) for your elevation value, as well as Transfer tool. (See Section 4.5 for more information.)
local grid coordinates and units (vs. latitude longitude).
GIS DataPRO v.2.0, En 27 4. A Quick TTour
our of GIS DataPRO
4.5 TTransferring
ransferring Data to/from the GS50 Sensor
There are two methods of transferring data from the Using the Sensor Transfer Tool
GS50 to GIS DataPRO software. A serial cable (RS-232) GIS DataPRO provides an easy to use transfer tool that
can be connected from the GS50 sensor to the PC, and allows you to transfer information to and from the
data can be transferred using the Sensor Transfer GS50 sensor and the PC. Data may be uploaded to or
tool in GIS DataPRO software. Or, if you have a downloaded from the Sensor via PCMCIA flash
PCMCIA card reader on your computer, you can use memory card or via a serial (RS-232) data transfer
the Windows Explorer to transfer data between the cable.
PCMCIA card and the working directory of the GIS
DataPRO software. From the Tools Menu, select Sensor Transfer.
Take the PCMCIA card out of the Leica GS50 unit and
insert into your computer’s PCMCIA card slot. Select
File, Import. Choose the File option. Make sure the
navigator window is pointed to the geodb directory
on the PC Card. Select the appropriate job that you
want transferred to the PC. Click on the Import button
and let the software take care of the rest.
4. A Quick TTour
our of GIS DataPRO 28 GIS DataPRO v.2.0, En
4.5 TTransferring
ransferring Data to/from the GS50 Sensor (continued)
Expand the Database folder on the left hand side, The Sensor folder lists all objects stored on the GS50
and then highlight the Projects folder underneath. sensor. Data can be transferred from the sensors
internal, external (PC card) or system memory.
The Database folder lists the loadable objects of the
GIS DataPRO database. This is where data can be
transferred from the PC to the GS50 sensor.
Transferable objects are read from the PC directory
where the GIS DataPRO software database
components are stored:
...\Leica Geosystems\GISDataPRO\Data\...
The PC folder lists the objects that are backed up on Expand the project folder and right click on the
the PC and which are not related to the GIS DataPRO name of one of the projects. In the drop down
database (such as the GS50 Firmware). The directory menu, you have several choices: SendTo, Save
where this data can be read from can be set from the As, Find, and Properties. Left click on SendTo
settings dialog box. (To access, right click on the PC and choose either the PC-Card or Hard Disk,
folder and choose the Settings option from the depending on where you want the data to go. If you
context menu). are sending from the PC-Card or Hard Disk to the
sensor, then you would choose Sensor, PC-Card,
or Sensor Interval, respectively.
4. A Quick TTour
our of GIS DataPRO 30 GIS DataPRO v.2.0, En
4.5 TTransferring
ransferring Data to/from the GS50 Sensor (continued)
Using Windows Explorer to transfer data Codelist
To transfer data from the PCMCIA card to your PC (for To transfer codelists to the PCMCIA card, use the
use in the GIS DataPRO Software), you must first explorer to copy the desired codelist (.CRF) files from
understand the directory and storing structure of the the PC (please refer to lesson one for the location of
GS50 sensor. the codelist on your PC) to the \Code directory on the
card.
If the PCMCIA card has been formatted on the GS50
sensor (Please refer to the GS50 user manual), then the Transferring GPS Raw Data from the PCMCIA
following directory structure should appear on the Card Using Windows Explorer
card.
After data has been collected in the field, the raw GPS
data files will be located in the \Geodb directory.
Open this directory using the Windows Explorer, and
copy all the files to your PC. Raw data can be copied
to any directory on your PC.
Firmware
If the GS50 sensor firmware needs to be updated, use
the Windows Explorer to place the firmware (FW) file
in the \GPS\Prog directory on the PC card.
• AutoCAD DXF
• AutoCAD DWG
• Microstation DGN
• MapInfo MIF
4. A Quick TTour
our of GIS DataPRO 32 GIS DataPRO v.2.0, En
4.6 Importing Data from your GIS or CAD (continued)
Choose New and another small box will appear. Type Now you are ready to import data. Choose File,
in a new name for the lookup table. Import, Foreign Formats from the menu. Navigate
to the appropriate directory where the data is stored
and then choose the correct type of import file in the
Files of type drop down list. Press Open. GIS
DataPRO will proceed to process the current code
table. A dialog showing this progress will appear.
4. A Quick TTour
our of GIS DataPRO 34 GIS DataPRO v.2.0, En
4.7 Importing GPS Reference Data
If the collected GPS data has not been corrected in Manual Import
real-time, it will need to be post processed. Before To import the reference file manually:
post-processing can be performed using the SKI-Pro Choose File, Import, Reference from the menu,
Wizard, a reference (base station) file will need to be or click on button from the toolbar.
imported. One option is to import this file manually,
by locating it and downloading it from the Internet,
another base station, or other sources. The reference Select your reference file.
file can be saved anywhere on the hard disk. Or, you
can use GIS DataPRO’s Automatic File Search feature
to locate and import the appropriate file either from
your network or from the Internet.
4. A Quick TTour
our of GIS DataPRO 36 GIS DataPRO v.2.0, En
4.7 Importing GPS Reference Data (continued)
After setting the parameters: Alternatively, you can choose the Tools, Search
Click Search to begin the LAN search. Reference, Internet from the menu.
The search engine will return all matching files to the
Reference Data textbox. The Download dialog will appear.
Use the checkbox beside the file name to check the
file you wish to import. The rover file must be loaded prior to using
Click Import to import the file. the Automatic Internet Search. The search will
automatically locate the ten closest reference
GPS Reference Search: Internet files, using the rover file as a guide.
Set Manual or Automatic Site Selection:
In the Ski-Pro wizard, right-click on the Internet GPS To use the Internet search,
Search button to choose Manual or Automatic From the Ski-Pro Wizard click on the GPS Search
icon .
Site Selection.
4. A Quick TTour
our of GIS DataPRO 38 GIS DataPRO v.2.0, En
4.7 Importing GPS Reference Data (continued)
In GIS DataPRO Version 2.0, additional functionality These new stations can then be accessed by way of
has been placed inside the Internet Reference the manual site selection list.
Wizard. These new features greatly enhance the For customization of data format specification in the
users ability to control where, how, and what URL string, please refer to the online help topic
reference data is imported. Internet Download: Add/ Edit custom sites
4. A Quick TTour
our of GIS DataPRO 40 GIS DataPRO v.2.0, En
4.8 Using the SKI-Pro Wizard to Post Process Raw GPS Data (continued)
Configuration of Data-Processing options In the Settings dialog box, you will see several
For each processing run a set of results will be Storage Options:
created. A set of results is comprised of: a list of 1. No automatic behavior: If this option is
Baselines, a list of Points (rover only), a list of data- selected, the data-processing will switch to the
processing Parameters, and a Logfile. After inspection Results-View Window after processing and the
of the data processing results you may select results will have to be stored manually.
individual or all baselines and store them in the 2. Switch to Result page and select using
Project database and shapefiles. You may also choose criteria: After processing, the Results View will
to automatically store all without Result page. be activated showing the Point Results. The points
will be selected based upon the settings of the
Click the button on the toolbar and select the Data selection criteria.
processing tab. 3. Auto store based upon criteria: After
processing the points will automatically be stored
based upon the settings of the selection criteria.
4. Auto store all without Result page: This is the
default option. If this option is selected the data-
processing will NOT switch to the Results-View
after processing, all points will be stored
automatically.
4. A Quick TTour
our of GIS DataPRO 42 GIS DataPRO v.2.0, En
4.8 Using the SKI-Pro Wizard to Post Process Raw GPS Data (continued)
The SKI-Pro Wizard gives the option to deselect In the left side of the window, there are two headers:
intervals so that they are not differentially corrected. Point ID, and Point class. The first row (SITE) is the
To deselect data: reference file. Right clicking with the mouse on the
first row brings up additional menu options: Expand,
Right click within the gray area of the SKI-Pro Wizard Expand All, Collapse All, Edit Point, Re-assign,
dialog to display the processing options. A “floating” Modify, Delete, Save As, Print, Find, Export To
toolbar will appear with the following options: RINEX, Properties.
Select All As, Deselect All, Select Mode, Zoom
In, Zoom Out, Zoom 100%, Zoom to Day, For a complete explanation of all these features, please
Process, Processing Parameters, Graphical refer to the GIS DataPRO on-line help system. In this
Settings, Windowing. For a complete explanation of menu, the Edit Point option allows the user to edit
all the features of the SKI-Pro Wizard, please refer to the reference file, in order to make sure that it matches
the GIS DataPRO on-line help system. the base file’s surveyed coordinates.
Click Select Mode to bring up another menu.
Select Mode allows you to change how the rover If you have not downloaded a reference file off the
files, reference files, and intervals are defined in the Internet, an Automatic Search option is available by
SKI-Pro Wizard. clicking on the Internet GPS Search button at the
Select the Rover option. bottom of the SKI-Pro Wizard. A right click will toggle
Using the mouse, draw a box around the between manual or automatic site selection. (See
appropriate portion of the rover file that you want to Section 4.7 for more information).
deselect. The deselected interval will change colors
from green to gray. Any proprietary dial-up program, such as
AOL, must be started manually before using
the Internet search feature.The rover file must
be loaded prior to using the Automatic Internet
Search. The search will automatically locate
the ten closest reference files to the rover file.
GIS DataPRO v.2.0, En 43 4. A Quick TTour
our of GIS DataPRO
4.8 Using the SKI-Pro Wizard to Post Process Raw GPS Data (continued)
To process data: Otherwise, click OK, and then Next at the bottom of
Select Process from the Context-Menu, or the screen to display all the points that have been
press the Process button on the bottom of processed. In the Results view, points can be
the dialog box. expanded by clicking on them with the mouse. A right
click will bring up another menu where you can
The progress bar at the bottom of the window will Select All of these points. On the left hand side of
inform you of how many rover intervals have been this screen, click on the small plus to expand the
processed. When finished, SKI-Pro Wizard will Results folder. Now, expand the Points folder
display a Processing Complete dialog box. underneath your rover file. Highlight points and scroll
to the right. On the right hand side of the screen, if it
The project database as well as the says ‘no’ in the stored field, right click and choose
shapefiles will be updated automatically if store. This should change all of the selected points to
you choose “Auto store all without Result ‘yes,’ which will store all of your post-processed data.
page” in General Settings, Data Storing the data will also create a new shapefile and
Processing tab. This is the default option. automatically update and redisplay any data that
If you have not selected any other appears in the Map View Window.
option,then, by default, you will not have a
Results window, and can skip the next Offset features will be re-calculated
section. automatically when storing the data-
processing results.
4. A Quick TTour
our of GIS DataPRO 44 GIS DataPRO v.2.0, En
4.8 Using the SKI-Pro Wizard to Post Process Raw GPS Data (continued)
Default Selection Criteria Selection Criteria Options:
Changing the default selection criteria enables you to General: Enables you to define Quality thresholds
permanently change the filter criteria for selecting and/or select baselines that meet the Ambiguity Status
baselines. requirements.
To change the default selection criteria: Point Type: Enables you to select baselines that meet
1. Right click In the Results tree view on the back- the Point Type requirement.
ground, select Default values, Selection Criteria....
Moving Points: If you enable Moving in the previous
page you may additionally define a distance criteria
between consecutive points.
4. A Quick TTour
our of GIS DataPRO 46 GIS DataPRO v.2.0, En
4.9 Project Management (continued)
Codes You can use the image referencing tool to geo-
Double clicking on a code will activate it (it will be reference the image file. Please consult the on-line
highlighted in red). Active codes are selected. help for more details. Documents can be viewed by
double clicking on them. GIS DataPRO will use
The order in which the codes appear in the project whatever program is registered in your Windows
manager dictate the order in which the codes are operating system, to view .DOC files.
drawn on the map. The last code will be drawn first,
and the first code will be drawn last. To rearrange the Project Properties
drawing order, simply click on the code, drag and drop Select the File, Properties menu item.
the code to the desired position within the codelist.
Right clicking on a code icon will bring up a context-
menu which will give you the option to show or hide
all the codes within the Map View Window in GIS
DataPRO. You will also have the option of importing a
code definition (Add) or a raw data file (Import File).
Right clicking on a code will give you additional
options such as activating, setting display
properties, removing or starting the codelist
manager.
4. A Quick TTour
our of GIS DataPRO 48 GIS DataPRO v.2.0, En
4.9 Project Management (continued)
Deleting Projects
GIS DataPRO’s Delete Project functionality will
remove a project from your local hard drive and will
also remove any registered components from the SKI-
PRO registry (used for post-processing.)
4. A Quick TTour
our of GIS DataPRO 50 GIS DataPRO v.2.0, En
4.10 Editing Data (continued)
3. You can also select multiple features using Press New Set if this is the first time the query is
Structured Query Language (SQL) query. run, press Add to Set if you are adding to an
From the Map menu, choose Select Objects, by original query, Add All to Set, or Deselect All to
SQL or click on the SQL button to bring up the select none.
dialog.
All features that satisfy your search criteria, will be
selected.
Feature Properties
Double clicking on any feature will bring up the feature
property box.
4. A Quick TTour
our of GIS DataPRO 52 GIS DataPRO v.2.0, En
4.10 Editing Data (continued)
Creating Objects
Objects can be created directly in the Map View
Window, or by entering coordinates. To create an
object, first activate the desired code in the Project
Manager. For example, to create a new Pole object,
activate the Pole code by clicking on it.
4. A Quick TTour
our of GIS DataPRO 54 GIS DataPRO v.2.0, En
4.10 Editing Data (continued)
Moving Objects New location
After selecting an object, it can be moved or deleted.
To move an object, select the object. When objects are
selected, a node (small green square) will appear in
the center of the object. Press the Move Object Node
icon from the toolbar.
Switch Point Object Code After selecting a node, or multiple nodes, you can
To change Point codes from one code to another: delete it by pressing the delete Node icon.
Right click on any point code within the Map View You can also select Map, Delete, Node.
Window and choose Switch Code from the
context-menu. Note: In GIS DataPRO Version 2.0, there is now an
The Switch To dialog will popup listing all “undo” functionality that will go back one step for all
available point codes in the project. Highlight the editing tasks.
desired code and choose OK.
COGO Functions
You can also create and/or move objects using GIS
DataPRO’s COGO functions.
4. A Quick TTour
our of GIS DataPRO 56 GIS DataPRO v.2.0, En
4.11 Working with Offset Data
Sometimes, when locations that a user is recording Points, lines, and polygon features can be offset. Only
are hard to reach, and the user is not able to stand one offset can be applied to a point feature. For line
directly on the desired position, the user can record and polygon (area) features, a single offset may not be
the position by using an offset. An offset is a feature appropriate. For example, 10 meters to the left,
in the GPS unit that allows users to record positions orthogonal to the direction of travel.
from a distance. Because a GPS receiver is designed
to compute the location of its antenna, the ability Leica GS50 supports line and area offset as well as the
to apply offsets to features is an enhancement of following point offset methods:
GPS-based data collection systems. Leica receivers Bearing and Distance
can record both a GPS position and an associated Double Bearing
distance and direction to the object of interest. Double Distance
Backward Bearing and Distance, and
There are two ways to enter offset information:
Chainage and Offset
1. User estimates a distance by using measuring tape
(Please refer to the GS50 Technical Reference Manual
and a compass to find the distance and bearing,
for more information).
respectively.
2. Obtain the offset by using a laser rangefinder
In Leica GIS DataPRO 2.0, you may view and edit offset
device, such as Leica Laser Locator, with the
data collected in the field. The modification of offset
GPS receiver. The distance measurement refers
data is retained in post processing.
to the distance the user is from the object, while
the bearing is the degrees from north. Declination
represents the deviation between magnetic north
and true north (also called ‘grid’ north). Declination
can vary by time and location, and can affect
offsets.
4. A Quick TTour
our of GIS DataPRO 58 GIS DataPRO v.2.0, En
4.11 Working with Offset Data (continued)
The Point ID (default attribute) will appear in this The point offset bearing and distance can be edited.
menu, as well as the offset type. Under Offset Type, Simply type in new numbers and click Apply. The
GIS DataPRO reads whatever point offset method was bearing and distance will change and the offset will be
used in the GS50. The next two fields, X, and Y, adjusted. To change the display units for any offsets,
indicate the point that was measured from, in the field, click on Tools, General Settings, Units. For more
to calculate the offset point. The graphic to the right information on offset features, refer to GIS DataPRO
shows the offset point from north. HP stands for online help.
hidden point (the offset point), and A for auxiliary,
which is the GPS point that the offset was measured
from.
GPS
Summary
View
4. A Quick TTour
our of GIS DataPRO 60 GIS DataPRO v.2.0, En
4.12 Using the Feature Browser (continued)
You can edit records by clicking on the field in the In addition to a feature or record being displayed in
feature browser and entering the data directly, or by the feature browser, it will also be highlighted in the
choosing items from the choice list. You can access Map and the GPS Summary View.
the choice list using the up and down arrows which
appear in each field when you click on it. GIS DataPRO
will check the integrity of all data entered to ensure
that the user/system defined ranges are not exceeded.
Note: The attribute Name cannot be edited.
4. A Quick TTour
our of GIS DataPRO 62 GIS DataPRO v.2.0, En
4.13 Using the Waypoint Manager (continued)
To create a new waypoint: To convert an existing feature into a waypoint:
Click on the Project tab at the bottom of the screen. In the If you right click on any point feature within the Map
expanded codelist (left hand side of the screen), click on the View Window, a menu will appear. Select Waypoint
“Waypoint” code. Once the “Waypoint” code has been from the menu to convert the feature you have selected
highlighted, waypoints can be created by clicking on the to a waypoint. This will add the selected feature to the
Map View Window using the Create Object by Freehand Waypoint project. The feature will remain in the
button , or by entering waypoints using coordinates . project. You can also convert multiple point features to
waypoints at the same time.
To create waypoints, the Waypoint code must be the Identical attribute values will be appended with a ._#.
active code in the Project Manager Tab. If you have where # will increment from 1 based on how many
just created or opened a waypoint project, the identical attribute values have been encountered.
Waypoint code will automatically become active. If
not, click on the waypoint code to highlight it so that it
becomes active.
4. A Quick TTour
our of GIS DataPRO 64 GIS DataPRO v.2.0, En
4.13 Using the Waypoint Manager (continued)
To import waypoints from a shapefile: To define your own naming convention, click on the
Use automatic name generation radio button.
Click on the Import button from the To name waypoints based on an attribute value, click
Waypoint Manager (Waypoint Tab at the on the Use attribute value radio button and select
bottom of GIS DataPRO). Choose file. the attribute you would like to use.
Importing Data from your GIS or CAD continued...
Highlight the shapefile you want to import. Created waypoints will be displayed in the Waypoint
Manager using the default waypoint Id (wpt#, where #
Click on the Import button. increments from 1). You can also use the Waypoint
Waypoints will be imported using the default waypoint Names template to define your own naming
Id naming convention (wpt#). convention (maximum 17 characters).
4. A Quick TTour
our of GIS DataPRO 66 GIS DataPRO v.2.0, En
4.14 Exporting Data to your GIS/CAD
After importing, processing, and editing your data, the The Export File dialog box will appear. Choose the
data is ready to be exported to a supported GIS format. type of file you want to create under the Save As Type
GIS DataPRO uses the ESRI Shapefile as its native format. drop down menu. Type a new filename into the dialog
box and choose the location where you want to save
GPS data in GIS DataPRO is automatically converted the file.
into shapefiles, therefore, you do not need to export
data when working with ESRI ArcView or ArcInfo. The export module requires a table of information,
Shapefiles are stored in the /Leica Geosystems/ which will tell it which attributes to export. This table
GISDataPRO/Data/Projects/Your Project name directory. is called a Lookup table. A current lookup table can be
Please see the lesson at the end of this section for used, or one can be created now (see section 4.6 for
more information. more information). GIS DataPRO requires a lookup
table before you can proceed.
GIS DataPRO supports the following export data types:
• AutoCAD DXF, DWG
• Microstation DGN
• MapInfo MIF
• User Defined ASCII
The export module requires a table of information, Once the filename and lookup table have been entered,
which will tell it which attributes to export. This table you are ready to process the data. Press Save and GIS
is called a Lookup table. A current lookup table can be DataPRO will proceed to export the current feature
used, or one can be created now (see section 4.6), database. A dialog showing the export process
however GIS DataPRO requires a lookup table before progress will appear.
4. A Quick TTour
our of GIS DataPRO 70 GIS DataPRO v.2.0, En
4.14 Exporting Data to your GIS/CAD (continued)
To export files to user defined ASCII format:
2. Click on the Settings button in the lower right The Template Tab allows you to define the ID counter,
hand corner of the dialog box. string separator, horizontal position order, and
3. In the ASCII Export Setting dialog box, you the header and footer for lines and areas. Headers
have four tabs: Contents, Format, Template, and footers surround the collection of points output
and Filter. for each line or area.
4. A Quick TTour
our of GIS DataPRO 72 GIS DataPRO v.2.0, En
4.14 Exporting Data to your GIS/CAD (continued)
Exporting Shapefiles The projection and units stored in these shapefiles,
GIS DataPRO uses the ESRI Shapefile as its native will be defined by the Coordinate System and units
format. Therefore, you do not need to export data attached to each project. The Coordinate system and
when working with ESRI products. units can be attached when you create a new project,
or can be changed from the Project Properties dialog.
GIS DataPRO will automatically create a shapefile for
each code that is loaded into your project. These For more information on shapefiles, please consult the
shapefiles will be created in the default project ESRI Shapefile Technical Description whitepaper which
directory: can be found on the ESRI website.
/Leica Geosystems/GISDataPRO/Data/Projects/Your
Project name
4. A Quick TTour
our of GIS DataPRO 74 GIS DataPRO v.2.0, En
4.15 Using the Workflow Manager (Next Step Wizard) (continued)
To define a workflow, use the left and right arrow keys Items appearing in the Workflow textbox to the right,
to move items between the Available Steps and will be executed sequentially when the Next/Previous
Workflow textboxes. Highlight an item that you wish Step functions are used. The words “Begin” and
to move, and then press the arrow key to move it to “End” appear in the box on the right to denote when
the right or left box. the starting and ending order to the events.
4. A Quick TTour
our of GIS DataPRO 76 GIS DataPRO v.2.0, En
Leica Geosystems, Inc. 23868 Hawthorne Blvd., Torrance, CA 90505-5908 USA
US/Int’l Tel: (310) 791-5300 Fax: (310) 791-6108
To learn more, call 1-866-LEICAGIS or visit www.leica-geosystems.com/gis