Professional Documents
Culture Documents
Injector Specification: Nozzle Holder Assembly No. 31242
Injector Specification: Nozzle Holder Assembly No. 31242
INJECTOR SPECIFICATION
© STANADYNE Corporation, all rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any
form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher.
Page 2 of 2
APPLICATION AND SERVICE INFORMATION
FOR HOLDER ASSEMBLY 31242
INJECTOR NOZZLE
STANADYNE CUSTOMER INSCRIPTION STANADYNE CUSTOMER INSCRIPTION
PART NO. PART NO. CODE PART NO. PART NO. CODE APPLICATION
TALKING CODE SHANK
OPENING PRESSURE
NEW AND SERVICE
INJECTOR Mpa (PSI) MAX VALVE LIFT NO. OF HOLES
NO. mm (inches) @ DIA. mm (inches)
31241 25.0 – 25.8 (3625 – 3741) 0.275 (.0108) 5 @ 0.240 (.0094)
32280 25.0 – 25.8 (3625 – 3741) 0.250 (.0098) 5 @ 0.210 (.0082)
35384 27.0 – 27.8 (3915 – 4031) 0.200 (.0078) 6 @ 0.182 (.0071)
35439 27.0 – 27.8 (3915 – 4031) 0.225 (.0088) 6 @ 0.206 (.0081)
36249 23.0 – 23.8 (3335 – 3451) 0.400 (.0157) 5 @ 0.200 (.0079)
36256 * 23.0 – 23.8 (3335 – 3451) 0.400 (.0157) 5 @ 0.214 (.0084)
38125 23.0 – 23.8 (3335 – 3451) 0.400 (.0157) 5 @ 0.209 (.0082)
41713 25.0 – 25.8 (3625 – 3741) 0.275 (.0108) 5 @ 0.238 (.0094)
© STANADYNE Corporation, all rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any
form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher.