Professional Documents
Culture Documents
Practical – 12
Aim: Study and simulate the working of dynamic routing using Cisco
Packet Tracer
Step-1:
- In this step we make two LAN connection using 2 routers, 2 switches and 4 devices
(PC ).
- We take 1 router, 1 switch and 2 devices (PC) for our LAN connection-1. Similarly
we take same things for the LAN connection-2.
- We connect PC-PT PC0 and PC-PT PC1 with switch0 and this switch0 is connected
with 1941 Router0. This makes our LAN connection-1.
- Again We connect PC-PT PC2 and PC-PT PC3 with switch1 and this switch1 is
connected with 1941 Router1. This makes our LAN connection-2.
- Now we give IP address to all devices with the help of IP config menu.
Step-2:
Step-3:
- This is practical for dynamic routing so we add all IP address of LAN-2 and LAN-1
in RIP config menu of router0.
- Similarly we add all IP address of LAN-1 and LAN-2 in RIP config menu of router1.
Step-4: