Professional Documents
Culture Documents
models
7.0 1206D-E70TTAG1 EU Stage IIIA - 178 196 160 200 176 225 Y
23.0 4006D-E23TAG2 India CPCB II - 638 702 600 750 660 825 -
Notes:
l All ratings are rounded to the nearest whole number and are for guidance only. Please refer to the technical data sheet for accurate powers.
l Electrical output is based on assumed alternator efficiency and is for guidance only.
l kVA figures are calculated using a typical power factor of 0.8.
l Switchable engines must be requested at point of order, please consult with your local Perkins representative.
l Perkins conditions of sale apply.
l All ratings data based on operation under ISO 8528-1, ISO 3046 conditions using typical fan sizes and drive ratios. Performance tolerance quoted by Perkins is +/-5%.
l Prime power = power available at variable load in lieu of main power network (please refer to the engine technical data sheets for specific load factor). An overload of 10% is permitted for 1 hour in every 12 hours of
operation.
l Standby power = power available at variable load in the event of a main power network (please refer to the engine technical data sheets for specific load factor) failure up to a maximum of 500 hours per year. No
overload is permitted.
1104C-44G2 Tier 2 - 47 52 43 53 47 59 -
1104D-44TG1 Tier 3 - - 63 - - 57 71 Y
1104C-44TG1 Tier 2 - 60 67 54 68 60 75 Y
1104C-44TG2 Tier 2 - 60 67 54 68 60 75 Y
1104D-E44TG1 Tier 3 - 65 71 55 68 60 75 -
4.4
1104C-44TAG1 Tier 2 - 80 89 72 91 80 100 -
1206J-E70TTAG3 Tier 4 Final DOC+DPF+SCR 167 184 135 169 149 186
1206J-E70TTAG4 Tier 4 Final DOC+DPF+SCR 217 238 180 225 200 250
1706J-E93TAG2 Tier 4 Final DOC+DPF+SCR 307 338 267 334 334 369 Y
12.5 2206F-E13TAG2 Tier 4 Final DOC+DPF+SCR 358 395 340 425 375 469 Y
2806F-E18TAG1 Tier 4 Final DOC+DPF+SCR 475 529 455 569 500 625 -
* Tier 4 Final pre-NTE and NRTC emissions standards - for use in Emergency Stationary Equipment
** For use in Emergency Stationary Equipment
*** Ratings available for DCP and ESP applications only
Notes:
l All ratings are rounded to the nearest whole number and are for guidance only. Please refer to the technical data sheet for accurate powers.
l Electrical output is based on assumed alternator efficiency and is for guidance only.
l kVA figures are calculated using a typical power factor of 0.8.
l Switchable engines must be requested at point of order, please consult with your local Perkins representative.
l Perkins conditions of sale apply.
l All ratings data based on operation under ISO 8528-1, ISO 3046 conditions using typical fan sizes and drive ratios. Performance tolerance quoted by Perkins is +/-5%.
l Prime power = power available at variable load in lieu of main power network (please refer to the engine technical data sheets for specific load factor). An overload of 10% is permitted for 1 hour in every 12 hours of
operation.
l Standby power = power available at variable load in the event of a main power network (please refer to the engine technical data sheets for specific load factor) failure up to a maximum of 500 hours per year. No
overload is permitted.
l Data centre power (DCP) = power available for variable of continuous electrical loads in a data centre. Up to 100% load factor is permitted for unlimited time. An overload of 10% is permitted for 1 hour in every 12
hours of operation.
l Emergency standby power (ESP) = power available in the event of a main power network failure, which may be run continuously. Load factor may be up to 100% of the ESP rating. No overload is permitted. Under
ISO8528 the maximum number of hours of running per year is 200 hours for combined ESP and maintenance. Under US Regulation Title 40 CFR Part 60 Subpart III, the engine may be run in non-emergency situations
for maintenance/testing purposes, but such running should be limited to 100 hours per year. Please refer to regulations for exact guidance.