Professional Documents
Culture Documents
CHILLED WATER
FAN COIL UNITS
General
• Fabricated with a rigid galvanized steel casing.
• The DIDW centrifugal fans have balanced, galvanized
steel, and forward curved blades.
• Single skin galvanized steel casing with 5mm thickness,
27 kg/m3 high-density non-flammable PE insulation.
• An optional return air plenum is available.
Coil
FEATURES
Drain Pan
• The coil can have 3 or 4 rows, with copper tubes mechanically • The drain pan is 25mm depth with 0.8mm thickness
bonded into corrugated aluminum fin collars. galvanized steel c/w internal epoxy polyester resin
• Coil pressure test up to 31.6kg/cm2(450psig). coating.
Recommended Max working pressure 18kgcm2 (250psig). • The drain pan is sloped towards the drain pipe with a
• Optional Copper fin or hydropillic blue fin is available. 2 deg. gradient.
• Water inlet / outlet connections are 3/4-inch female pipe • The drain pan has one 1/2-inch male pipe thread (BT)
thread (BT). connection.
• Header assembly is a one-piece casting, which enables • The standard insulation material is 5mm thickness,
to connect steel pipe directly. 27kg/m3 density PE foam.
• A manual air vent is fitted with a drain line to the drain
pan to avoid any water drips when venting.
General Data
MODEL SFC03BW SFC04BW SFC06BW SFC08BW SFC10BW SFC12BW
btu/hr 10,000 13,700 18,500 24,000 28,700 33,200
Nominal Cooling Capacity
W 2,900 4,000 5,400 7,000 8,400 9,700
btu/hr 7,900 10,600 14,700 18,800 22,900 26,700
Nominal Sensible Cooling Capacity
W 2,300 3,100 4,300 5,500 6,700 7,800
Power Supply V/Ph/Hz 220 ~240 / 1 / 50
Motor Type 3 Speed Permanent Split Capacitor
Max Unit Running Amp A x Qty 0.38 0.45 0.65 0.74 0.45 + 0.74 0.65 + 0.65
External Statics Pressure (H) (without plenum box) Pa 60
External Statics Pressure (H) (with plenum box) * Pa 30
H 340 430 610 780 970 1130
Air Flow @ 30Pa ESP * (CFM) M 300 380 520 660 830 980
L 270 340 450 540 690 820
H 1200 1200 1250 1220 1200+1220 1250+1250
Rated Fan Speed (RPM) M 920 970 1000 940 970+940 1000+1000
L 700 800 820 800 800+800 820+820
H 38.6 39.2 42.5 46.2 47.5 48.3
Sound Pressure Level (dBA) M 33.8 33.8 38.2 40.4 43.6 43.6
L 29.7 30.3 33.3 35.1 38.6 40.0
Fan Coil Water Volume / Mass cm 3 795 1179 1439 1763 2066 2437
Condensate Drain Size mm(in) 12.7 (1/2")
USGPM 2.1 2.9 4.1 5.4 6.5 7.8
Norminal Water Flow Rate
LITRES/M 8 11 15 20 24 29
Head Loss kPa 27 21 19 21 21 23
Max Working Pressure kPa(psi) 1600 (230)
Connection (Thread Type) Inch(mm) 3/4" (NPT) 19.0
Unit Weight kg(lb) 17 (37.5) 22 (48.5) 26 (57.3) 30 (66.1) 37 (81.6) 43 (94.8)
Components Data
MODEL SFC03BW SFC04BW SFC06BW SFC08BW SFC10BW SFC12BW
Insulation PE / 5mm
Qty 1 1 2 2 3 4
Length mm 200
Drive Direct
Qty 1 1 1 1 2 2
Insulation Grade B
Rated Running Current A x Qty 0.28 0.33 0.55 0.60 0.33 + 0.60 0.55 + 0.55
Thickness mm 0.3
Row 3
Filtration Quantity pc 1 2 2 3 3 4
Note:
1. All specifications are subjected to change by the manufacturer without prior notice
2. Nominal cooling capacity are based on the below conditions:
a) Entering air temperature 27 degC (80.6 degF) DB and 19 degC (66.2 deg F) WB
b) Entering water temperature 7 degC (44.6 degF)
c) Leaving water temperature 12 degC (53.6 degF)
3. Sound Pressure Level is measured in anaechoic chamber ; at 1.4m below the unit (free return and discharge air was ducted to adjacent room)
The value usually will be larger in actual operating enviroment due to the effect of the external sound.
General Data - High Delta T
MODEL SFCH03BW SFCH04BW SFCH06BW SFCH08BW SFCH10BW SFCH12BW
btu/hr 9,300 13,400 18,500 22,900 27,400 33,500
Nominal Cooling Capacity
W 2,700 3,900 5,400 6,700 8,000 9,800
btu/hr 7,600 10,600 14,700 18,500 22,600 27,400
Nominal Sensible Cooling Capacity
W 2,200 3,100 4,300 5,400 6,600 8,000
Power Supply V/Ph/Hz 220 ~240 / 1 / 50
Motor Type 3 Speed Permanent Split Capacitor
Max Unit Running Amp A x Qty 0.38 0.45 0.65 0.74 0.45 + 0.74 0.65 + 0.65
External Statics Pressure (H) (without plenum box) Pa 60
External Statics Pressure (H) (with plenum box) * Pa 30
H 300 410 570 730 900 1070
Air Flow @ 30Pa ESP * (CFM) M 260 360 490 580 740 930
L 230 330 420 500 670 790
H 1200 1200 1250 1220 1200+1220 1250+1250
Rated Fan Speed (RPM) M 920 970 1000 940 970+940 1000+1000
L 700 800 820 800 800+800 820+820
H 37.0 38.7 41.6 45.3 46.6 47.4
Sound Pressure Level (dBA) M 32.0 33.1 37.5 38.8 42.0 42.8
L 28.7 30.0 32.4 34.1 37.7 39.0
Fan Coil Water Volume / Mass cm 3 832 1235 1508 1852 2168 2558
Condensate Drain Size mm (in) 12.7 (1/2")
USGPM 1.3 1.8 2.6 3.5 4.1 5.1
Norminal Water Flow Rate
LITRES/M 5 7 10 13 16 19
Head Loss kPa 15 11 22 21 18 29
Max Working Pressure kPa (psi) 1600 (230)
Connection (Thread Type) Inch (mm) 3/4" (NPT) 19.0
Unit Weight kg (lb) 17 (37.5) 22 (48.5) 26 (57.3) 30 (66.1) 37 (81.6) 43 (94.8)
Insulation PE / 5mm
Qty 1 1 2 2 3 4
Length mm 200
Drive Direct
Qty 1 1 1 1 2 2
Insulation Grade B
Rated Running Current A x Qty 0.30 0.33 0.55 0.60 0.33 + 0.60 0.55 + 0.55
Thickness mm 0.3
Row 4
Filtration Quantity pc 1 2 2 3 3 4
Note:
1. All specifications are subjected to change by the manufacturer without prior notice
2. Nominal cooling capacity are based on the below conditions:
a) Entering air temperature 27 degC (80.6 degF) DB and 19 degC (66.2 deg F) WB
b) Entering water temperature 6.67 degC (44.0 degF)
c) Leaving water temperature 14.4 degC (58.0 degF)
3. Sound Pressure Level is measured in anaechoic chamber ; at 1.4m below the unit (free return and discharge air was ducted to adjacent room)
The value usually will be larger in actual operating enviroment due to the effect of the external sound.
Air flow Air flow
Return
Return Supply
(Right
hand side)
Eye
Supply
Nomenclature | SFC 08 BW - P 3 AR
Brand S : Saiver
Capacity 03 : 300cfm
04 : 400cfm
06 : 600cfm
08 : 800cfm
10 : 1000cfm
12 : 1200cfm
Series B : B Series
Electrical A : 50 Hz/1Ph/220~240V
B : 60 Hz/1Ph/208~230V
SAIVER S.R.L.
Via M. da Besozzo
16 20052 Monza (Milan) Italy.
Tel : +39.039.282831, Fax : +39.039.2025668
Email : info@saiver.com
Website : www.saiver.it
SFC0718