Professional Documents
Culture Documents
Page 1 of 2
Shutdown SIS
Previous Screen
Product: WHEEL TRACTOR
Model: 627F WHEEL TRACTOR 1DL
Configuration: 627F Wheel Tractor/Scraper 3406B Engine 1DL00001-UP (MACHINE)
Service Magazine
2013/02/28
Media Number -SEPD1574-00 Publication Date -28/02/2013 Date Updated -28/02/2013
i05268939
Caterpillar Products:
All
Service Magazine SEPD1507, 04 October 2012, "Procedure to Test the Position Sensor of the
Hydraulic Cylinder". Disregard this article. See the replacement article that follows.
A Special Instruction has been published that contains a procedure that has been developed in order to
test "In-Cylinder" sensors. This procedure is applicable to the sensors that are listed in Table 1.
Note: Table may not contain all the hydraulic cylinder position sensor part numbers available.
Table 1
Sensor Class Reference Table (1)
Part Number Sensor Class Part Number Sensor Class
212-1490 3 249-5193 3
213-2491 3 252-6361 3
215-8934 3 252-6362 3
217-5776 3 252-6363 3
217-6566 2 252-7813 3
217-6567 2 262-5906 3
219-4714 2 267-5257 3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2021-10-31
627F Wheel Tractor/Scraper 3406B Engine 1DL00001-UP (MACHINE)(SEBP2257 - 11... Page 2 of 2
222-1461 2 271-9153 3
228-0805 2 274-1640 3
231-4627 2 280-2243 3
232-0241 2 281-8989 3
234-9005 2 294-2963 2
216-2954 3 328-6117 3
(1)
Table may not contain all the hydraulic cylinder position sensor part numbers available.
Refer to Special Instruction, REHS7338, "Procedure to Test the Position Sensor of a Hydraulic
Cylinder" for the correct procedure.
Copyright 1993 - 2021 Caterpillar Inc. Sun Oct 31 15:31:59 UTC+0200 2021
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2021-10-31