Professional Documents
Culture Documents
Nepovratni Ventili COMATROL
Nepovratni Ventili COMATROL
* Flow ratings are based on a pressure drop of 7 bar [100 psi] unless otherwise noted. They are for comparison purposes only.
Quick Reference
[50 US gal/min] [2000 psi]
3C90-01 FC-304 190 l/min 210 bar CV - 21
[50 US gal/min] [3045 psi]
* Flow ratings are based on a pressure drop of 7 bar [100 psi] unless otherwise noted. They are for comparison purposes only.
BASIC OPERATION Check valves allow free flow in one direction and block flow in the opposite direction.
Check valves
REVERSE FLOW CHECK Reverse flow check valves, useful for Reverse flow check valve
VALVES higher pressure applications or where
housing or size constraints require this
flow path are also available. These valves
have guided poppets that block flow 1
from 1 to 2 and are spring biased closed
until sufficient pressure is applied at 2 to
open flow to 1. 2
SLIP-IN CHECK VALVES Slip-in style check valves are cartridges Slip-in check valve
that drop into small cavities and are
retained by SAE plugs or by other
cartridge valves. They are ideal for use in
manifolds where space savings is critical.
Versions of these valves with Delrin®
seats are also available for applications
requiring extremely low leakage.
INLINE CHECK VALVES Also available are in-line check valves, Inline check valve
which can be used to simplify machine
plumbing.
applications including:
CV - Check Valves Catalog
Application Notes
OPERATION This valve allows free flow from 1 to 2 and blocks flow from 2 to 1.
102 7
87 6
Specifications
Pressure drop
73 5
58 4
Rated pressure 207 bar [3000 psi]
44 3
Rated flow at 7 bar 3 l/min
29 2
100 psi [0.8 US gal/min]
15 1
Leakage 6 drops/min @ Rated
0
L/min 1 2 3 4 pressure
Flow
US gal/min 0.3 0.5 0.8 1.1 Weight 0.01 kg [0.022 lb]
Cavity CP04-2
CV04-NB
I 0.188 in
7/16-20 UNF
t 10-15 N.m
[8-10 lbf.ft]
25.1 2.5
[0.99] [0.10]
ORDERING
INFORMATION
CV04-NB-0.3-B-00
Housing and ports Housing Part #
Crack Pressure 00 = No Housing No Housing
0.3 = 0.3 bar [5 psi] 4S = Al, #4 SAE CP04-2-4S
1.7 = 1.7 bar [25 psi] 2B = Al, 1/4 BSP CP04-2-2B
Seals Seal Kit
B = Buna-N 120077
V = Viton 11019554
OPERATION This valve allows free flow from 1 to 2 and blocks flow from 2 to 1.
1-2
8
100
6
Specifications
Rated pressure* 350 bar [5075 psi]
50
4 Rated flow at 7 bar 38 l/min
[100 psi] [10 US gal/min]
2
Leakage 6 drops/min @ Rated
0 0
15 30 45 l/min pressure
Weight 0.05 kg [0.11 lb]
0 4 8 12 US gal/min
Cavity SDC08-2
*Rated pressure based on NFPA fatigue test
DIMENSIONS Cross-sectional view standard (at 1 million cycles)
CV - Check Valves Catalog
mm in
CV08-NP
CV08-NP
22 mm [0.866 in] 3/4-16 UNF
27-34 Nm [20-25 lbf*ft]
[Ø 0.87]
[Ø 0.50]
Ø 22.0
Ø 12.7
1
2
9.0 27.0
[0.35] [1.06]
ORDERING
INFORMATION CV08-NP-0.3-B-00
Check Valve Code Ports & Material Body Nomenclature
Poppet Type, Normal Direction 00 00 = Cartridge only No Body
DG2B Al, 1/4 BSP SDC08-2-DG-2B
DG3B Al, 3/8 BSP SDC08-2-DG-3B
Crack Pressure
4S Al, #4 SAE CP08-2-4S
0.3 0.3 bar [5 psi]
6S Al, #6 SAE CP08-2-6S
1 1.0 bar [15 psi]
**Aluminum bodies are to be used for pressures less than 210 bar (3000 psi)
2 2.0 bar [30 psi]
***Other housings available
5 5.0 bar [73 psi]
7 7.0 bar [100 psi]
Seal Option Seal Kit
B = Buna-N 120221
V = Viton 120222
OPERATION This valve allows free flow from 1 to 2 and blocks flow from 2 to 1.
8
100
6
1-2 Specifications
Rated pressure* 350 bar [5075 psi]
4
50 Rated flow at 7 bar 80 l/min
2 [100 psi] [21.1 US gal/min]
Leakage 6 drops/min @ Rated
0 0
15 30 45 60 75 90 l/min pressure
0 4 8 12 16 20 24 US gal/min
Weight 0.08 kg [0.18 lb]
Cavity SDC10-2
*Rated pressure based on NFPA fatigue test
DIMENSIONS Cross-sectional view standard (at 1 million cycles)
CV10-NP
25.4 mm [1 in]
7/8-14 UNF
41-47 Nm [30-35 lbf*ft]
[Ø0.62]
[Ø1.10]
Ø28.0
Ø15.9
2
8.5 32.1
[0.33] [1.26]
ORDERING
INFORMATION CV10-NP-0.3-B-00
Check Valve Code Ports & Material Body Nomenclature
Poppet Type, Normal Direction 00 00 = Cartridge only No Body
6S Aluminum, #6 SAE SDC10-2-6S
Crack Pressure 8S Aluminum, #8 SAE SDC10-2-8S
0.3 0.3 bar [5 psi] 3B Aluminum, 3/8 BSP SDC10-2-3B
1 1.0 bar [15 psi] 4B Aluminum, 1/2 BSP SDC10-2-4B
2 2.0 bar [30 psi] **Aluminum bodies are to be used for pressures less than 210 bar (3000 psi)
5 5.0 bar [73 psi] ***Other housings available
7 7.0 bar [100 psi]
10 10 bar [150 psi]
Seal Option Seal Kit
B = Buna-N 120015
15 15 bar [217 psi]
V = Viton 120016
OPERATION This valve allows free flow from 1 to 2 and blocks flow from 2 to 1.
8
100
1-2 Specifications
6
Rated pressure* 315 bar [4570 psi]
4 Rated flow at 7 bar 210 l/min
50
2
[100 psi] [55.5 US gal/min]
Leakage 6 drops/min @ Rated
0 0
40 80 120 160 200 240 l/min pressure
0 10 20 30 40 50 60 gal/min Weight 0.26 kg [0.57 lb]
Cavity SDC16-2
*Rated pressure based on NFPA fatigue test
DIMENSIONS Cross-sectional view standard (at 1 million cycles)
CV - Check Valves Catalog
mm in
CP102-1
CP102-1
38.1 mm [1.5 in]
122-136 Nm [90-100 lbf*ft] 1-5/16-12 UN
[Ø 1.13]
[Ø 1.50]
Ø 38.1
Ø 28.6
2 5.0
[0.20]
12.5 44.7
[0.49] [1.76]
ORDERING
INFORMATION CP102-1-B-0-005
Check Valve
Poppet Type, Normal Direction Crack Pressure
005 0.34 bar [5 psi]
015 1.0 bar [15 psi]
Seal Kit Seal Option 030 2.1 bar [30.4 psi]
120019 B = Buna-N
040 2.8 bar [40 psi]
120020 V = Viton
065 4.5 bar [65 psi]
Code Ports & Material Body Nomenclature
100 6.9 bar [100 psi]
0 0 = Cartridge only No Body
DG6B Al, 3/4 BSP SDC16-2-DG-6B
DG8B Al, 1 BSP SDC16-2-DG-8B
12S Al, #12 SAE CP16-2-12S
16S Al, #16 SAE CP16-2-16S
**Aluminum bodies are to be used for pressures less than 210 bar (3000 psi)
*** Other housings available
OPERATION This valve allows free flow from 1 to 2 and blocks flow from 2 to 1.
8 1-2
100 Specifications
6
Rated pressure* 215 bar [3120 psi]
4 Rated flow at 7 bar 330 l/min
50
[100 psi] [87.2 US gal/min]
2
Leakage 6 drops/min @ Rated
0 0 pressure
50 100 150 200 250 300 350 400 l/min
Weight 0.54 kg [1.20 lb]
0 20 40 60 80 100 gal/min
Cavity SDC20-2
*Rated pressure based on NFPA fatigue test
DIMENSIONS Cross-sectional view standard (at 1 million cycles)
CP103-1
47.6 mm [1.875 in]
217-231 Nm [160-170 lbf*ft]
1-5/8-12 UN
[Ø 1.44]
[Ø 1.87]
Ø 47.6
Ø 36.5
2
3.0
[0.12]
16.0 55.8
[0.63] [2.20]
ORDERING
INFORMATION CP103-1-B-0-005
Check Valve Crack Pressure
Poppet Type, Normal Direction 005 0.34 bar [5 psi]
015 1.0 bar [15 psi]
Seal Kit Seal Option
030 2.1 bar [30 psi]
120011 B = Buna-N
065 4.5 bar [65 psi]
120012 V = Viton
100 7 bar [100 psi]
OPERATION This valve allows free flow from 2 to 1 and blocks flow from 1 to 2.
Pressure drop 1 2
26 cSt [121 SUS] hyd.oil at 50ƱC [122 ƱF]
psi bar out in
150 10
2-1
8
100 Specifications
6 Rated pressure* 350 bar [5075 psi]
Rated flow at 7 bar 4.5 l/min
4
50 [100 psi] [1.2 US gal/min]
2 Leakage 6 drops/min @ Rated
pressure
0 0
1 2 3 4 5 6 l/min Weight 0.01 kg [0.022 lb]
0 0.5 1 1.5 gal/min Cavity CP04-2
*Rated pressure based on NFPA fatigue test
DIMENSIONS Cross-sectional view standard (at 1 million cycles)
CV - Check Valves Catalog
mm in
CP104-2
CP104-2
4.76 mm [0.188 in]
10-15 Nm [8-10 lbf*ft]
7/16-20 UNF
[Ø 0.31]
Ø 7.9
[Ø 0.56]
1
Ø 14.2
2.5 30.5
[0.10] [1.20]
ORDERING
INFORMATION CP104-2-B-0
Check Valve
Ball Type, Reverse Direction Code Ports & Material Body Nomenclature
0 0 = Cartridge only No Body
2B Al, 1/4 BSP CP04-3-2B
Seal Option Seal kit
4S Al, #4 SAE CP04-2-4S
B = Buna-N 120077
**Aluminum bodies are to be used for pressures less than 210 bar (3000 psi)
V = Viton 11019554
*** Other housings available
OPERATION This valve allows free flow from 2 to 1 and blocks flow from 1 to 2.
145 10
Pressure drop
116 8 Specifications
87 6 Rated pressure 350 bar [5075 psi]
Rated flow at 7 bar 20 l/min
58 4
[100 psi] [5 US gal/min]
29 2
Leakage 6 drops/min @ 207 bar 3000
0 psi
L/min 8 16 24 32
Flow Weight 0.05 kg [0.11 lb]
US gal/min 2.1 4.2 6.3 8.5
Cavity SDC08-2
h 0.875 in
t 27-34 N.m
3/4-16 UNF
[20-25 lbf.ft]
27.7 6.4
[1.09] [0.25]
ORDERING
INFORMATION CP108-2-B-6S-005
Crack pressure
Housing and ports Housing P/N 005 = 0.34 bar [5 psi]
0 = No Housing No Housing 015 = 1.0 bar [15 psi]
DG2B = Al, 1/4 BSP SDC08-2-DG-2B 030 = 2.1 bar [30 psi]
DG3B = Al, 3/8 BSP SDC08-2-DG-3B 050 = 3.4 bar [50 psi]
4S = Al, #4 SAE CP8-2-4S 065 = 4.5 bar [65 psi]
6S = Al, #6 SAE CP8-2-6S 100 = 6.9 bar [100 psi]
Other housings available
OPERATION This valve allows free flow from 2 to 1 and blocks flow from 1 to 2.
174 12 out in
145 10
Pressure drop
116 8
Specifications
87 6 Rated pressure 350 bar [5075 psi]
58 4
Rated flow at 7 bar 50 l/min
[100 psi] [13 US gal/min]
29 2
Leakage 6 drops/min @ 207 bar 3000
0 psi
L/min 10 20 30 40 50 60 70
Flow Weight 0.08 kg [0.17 lb]
US gal/min 2.6 5.3 7.9 10.6 13.2 15.9 18.5
Cavity SDC10-2
mm in
CP100-2
h 1.00 in
t 41-47 N.m
[30-35 lbf.ft]
7/8-14 UNF
31.8 7.9
[1.25] [0.31]
ORDERING
INFORMATION CP100-2-B-8S-005
Crack pressure
Housing and ports Housing P/N 005 = 0.34 bar [5 psi]
0 = No Housing No Housing 015 = 1.0 bar [15 psi]
DG3B = Al, 3/8 BSP SDC10-2-DG-3B 030 = 2.1 bar [30 psi]
DG4B = Al, 1/2 BSP SDC10-2-DG-4B 050 = 3.4 bar [50 psi]
6S = Al, #6 SAE CP10-2-6S 065 = 4.5 bar [65 psi]
8S = Al, #8 SAE CP10-2-8S 100 = 6.9 bar [100 psi]
Other housings available
OPERATION This valve allows free flow from 2 to 1 and blocks flow from 1 to 2.
174 12 out in
145 10
Pressure drop
116 8
Specifications
87 6
Rated pressure 350 bar [5075 psi]
58 4 Rated flow at 7 bar 75 l/min
29 2 100 psi [20 US gal/min]
Leakage 6 drops/min @ 207 bar 3000
0
L/min 20 40 60 80 100 psi
Flow
US gal/min 5.3 10.6 15.9 21.1 26.4 Weight 0.18 kg [0.40 lb]
Cavity CP12-2
CP101-2
h 1.25 in
t 68-75 N.m
1-1/16-12 UN [50-55 lbf.ft]
44.5 12.7
[1.75] [0.50]
ORDERING
INFORMATION CP101-2-B-12S-005
Crack pressure
Housing and ports Housing P/N 005 = 0.34 bar [5 psi]
0 = No Housing No Housing 015 = 1.0 bar [15 psi]
4B = Al, 1/2 BSP CP12-2-4B 030 = 2.1 bar [30 psi]
6B = Al, 3/4 BSP CP12-2-6B 065 = 4.5 bar [65 psi]
10S = Al, #10 SAE CP12-2-10S 100 = 6.9 bar [100 psi]
12S = Al, #12 SAE CP12-2-12S
Other housings available
OPERATION This valve allows free flow from 2 to 1 and blocks flow from 1 to 2.
145 10
Pressure drop
116 8 Specifications
87 6 Rated pressure 350 bar [5075 psi]
Rated flow at 7 bar 150 l/min
58 4
100 psi [40 US gal/min]
29 2
Leakage 6 drops/min @ 207 bar 3000
0 psi
L/min 40 80 120 160 200 240
Flow Weight 0.26 kg [0.57 lb]
US gal/min 10.6 21.1 31.7 42.3 52.8 63.4
Cavity SDC16-2
mm in
CP102-2
CP102-2
h 1.50 in
t 122-136 N.m
1-5/16-12 UN [90-100 lbf.ft]
44.5 12.7
[1.75] [0.50]
ORDERING
INFORMATION CP102-2-B-16S-005
Crack pressure
Housing and ports Housing P/N 005 = 0.34 bar [5 psi]
0 = No Housing No Housing 015 = 1.0 bar [15 psi]
HG-6B = Al, 3/4 BSP SDC16-2-HG-6B 030 = 2.1 bar [30 psi]
HG-8B = Al, 1 BSP SDC16-2-HG-8B 050 = 3.4 bar [50 psi]
12S = Al, #12 SAE CP16-2-12S 065 = 4.5 bar [65 psi]
16S = Al, #16 SAE CP16-2-16S 100 = 6.9 bar [100 psi]
Other housings available
OPERATION This valve allows free flow from 2 to 1 and blocks flow from 1 to 2.
out in
174 12
145 10
Pressure drop
116 8
Specifications
87 6 Rated pressure 350 bar [5075 psi]
58 4 Rated flow at 7 bar 265 l/min
100 psi [70 US gal/min]
29 2
Leakage 6 drops/min @ 207 bar 3000
0 psi
L/min 80 160 240 320 400
Flow Weight 0.54 kg [1.20 lb]
US gal/min 21.1 42.3 63.4 84.5 105.7
Cavity SDC20-2
CP103-2
h 1.875 in
1-5/8-12 UN t 217-231 N.m
[160-170 lbf.ft]
57.2 16.7
[2.25] [0.66]
ORDERING
INFORMATION CP103-2-B-20S-005
Crack pressure
Housing and ports Housing P/N 005 = 0.34 bar [5 psi]
0 = No Housing No Housing 015 = 1.0 bar [15 psi]
8B = Al, 1 BSP CP20-2-8B 030 = 2.1 bar [30 psi]
10B = Al, 1-1/4 BSP CP20-2-10B 050 = 3.4 bar [50 psi]
16S = Al, #16 SAE CP20-2-16S 065 = 4.5 bar [65 psi]
20S = Al, #20 SAE CP20-2-20S 100 = 6.9 bar [100 psi]
Other housings available
Seals
Code Seal kit
B = Buna-N 120011
V = Viton 120012
OPERATION This valve allows free flow from 1 to 2 and blocks flow from 2 to 1.
73 5
Pressure drop
58 4 Specifications
Rated pressure 210 bar [3045 psi]
44 3
Rated flow at 7 bar 70 l/min
29 2
100 psi [19 US gal/min]
15 1 Leakage 15 drops/min @ rated
pressure
0
L/min 10 20 30 40 50 60 70 Weight 0.03 kg [0.07 lb]
Flow
US gal/min 2.6 5.3 7.9 10.6 13.2 15.9 18.5 Cavity FC-144
mm in
3C50-01
3C50-01
18.9
[0.75] 2 1
24.7
[0.97]
ORDERING
INFORMATION
3C50-01-B-0-005
Crack pressure
005 = 0.34 bar [5 psi]
OPERATION This valve allows free flow from 1 to 2 and blocks flow from 2 to 1. Valve uses a Delrin®
seat for low leakage
73 5
Pressure drop
58 4 Specifications
Rated pressure 140 bar [2000 psi]
44 3
Rated flow at 7 bar 70 l/min
29 2
100 psi [19 US gal/min]
15 1 Leakage 6 drops/min @ rated
pressure
0
L/min 10 20 30 40 50 60 70 Weight 0.01 kg [0.02 lb]
Flow
US gal/min 2.6 5.3 7.9 10.6 13.2 15.9 18.5 Cavity FC-144
3C60-01
18.9
[0.75] 2 1
24.7
[0.97]
ORDERING
INFORMATION
3C60-01-B-0-005
Crack pressure
005 = 0.34 bar [5 psi]
OPERATION This valve allows free flow from 1 to 2 and blocks flow from 2 to 1. Valve uses a Delrin®
seat for low leakage.
29 2
23 1.6
Pressure drop
Specifications
17 1.2 Rated pressure 140 bar [2000 psi]
12 0.8
Rated flow at 7 bar 190 l/min
100 psi [50 US gal/min]
6 0.4 Leakage 6 drops/min @ rated
pressure
0
L/min 40 80 120 160 200 Weight 0.04 kg [0.09 lb]
Flow
US gal/min 10.6 21.1 31.7 42.3 52.8 Cavity FC-304
mm in
3C80-01
3C80-01
1 2 30.1 [1.19]
ORDERING 3C80-01-B-0-005
INFORMATION
Cracking pressure
005 = 0.34 bar [5 psi]
025 = 1.7 bar [25 psi]
OPERATION This valve allows free flow from 1 to 2 and blocks flow from 2 to 1.
29 2 in out
23 1.6
Pressure drop
17 1.2 Specifications
Rated pressure 210 bar [3045 psi]
12 0.8
Rated flow at 7 bar 190 l/min
6 0.4 100 psi [50 US gal/min]
Leakage 15 drops/min @ rated
0
L/min 40 80 120 160 200 pressure
Flow
US gal/min 10.6 21.1 31.7 42.3 52.8 Weight 0.05 kg [0.11 lb]
Cavity FC-304
3C90-01
1 2 30.1 [1.19]
ORDERING 3C90-01-B-0-005
INFORMATION
Crack pressure
005 = 0.34 bar [5 psi]
OPERATION This valve allows free flow from 1 to 2 and blocks flow from 2 to 1.
87 6 045
Specifications
Pressure drop
73 5
mm in
3C11-01
3C11-01
19.1 69.9
[0.75] [2.75]
SAE #4 (7/16-20)
(both ends)
1 2
ORDERING 3C11-01-4S-65
INFORMATION
Crack pressure
3 = 0.2 bar [3 psi]
15 = 1.0 bar [15 psi]
45 = 3.1 bar [45 psi]
65 = 4.5 bar [65 psi]
Port sizes
4S =SAE #4
CV - 22 11141707 • Rev CB • March 2016
Table of Contents/Introduction Quick Reference Index
OPERATION This valve allows free flow from 1 to 2 and blocks flow from 2 to 1.
Specifications
psi] Rated pressure 350 bar [5075 psi]
r [73
Sprin g 5 ba
Rated flow at 7 bar 30 l/min
.3 psi]
bar [7 100 psi [8 US gal/min]
Spring 0.5
Weight 0.08 kg [0.18 lb]
7.5 15 22.5 30 Cavity none
2 4 6 8
RS 06
19 mm Port
1 2
58.5
[2.30]
ORDERING
INFORMATION
RS 06 / 0.5 G
Port
A = SAE #6
G = 1/4 BSP
Crack pressure
0.5 = 0.5 bar [7.25 psi]
5 = 5 bar [72.5 psi]
OPERATION This valve allows free flow from 1 to 2 and blocks flow from 2 to 1.
psi bar 154 SUS (33 cSt) hyd. oil @ 100° F (38° C) 1 2
145 10
in out
Crack pressure = 65
116 8
45
Specifications
Pressure drop
87 6
mm in
3C12-01
3C12-01
22.4 76.2
[0.88] [3.00]
SAE #6 (9/16-18)
(both ends)
1 2
ORDERING
INFORMATION 3C12-01-6S-3
Crack pressure
3 = 0.2 bar [3 psi]
Port sizes
6S = SAE #6
OPERATION This valve allows free flow from 1 to 2 and blocks flow from 2 to 1.
in out
Specifications
psi] Rated pressure 350 bar [5075 psi]
Spring 5 bar [73
Rated flow at 7 bar 60 l/min
psi]
bar [7.3 100 psi [16 US gal/min]
Spring 0.5
Weight 0.13 kg [0.29 lb]
15 30 45 60 Cavity none
4 8 12 16
RS 10
22 mm Port
1 2
70.0
[2.76]
ORDERING RS 10 / 5 - G
INFORMATION
Port
G = 3/8 BSP
Crack Pressure
0.5 = 0.5 bar [7 psi]
5 = 5 bar [73 psi]
OPERATION This valve allows free flow from 1 to 2 and blocks flow from 2 to 1.
116 8 45
Pressure drop
Specifications
87 6 15
Rated pressure 350 bar [5075 psi]
58 4 Rated flow at 7 bar 70 l/min
100 psi [19 US gal/min]
29 2 3
Leakage 5 drops/min @ Rated
0 pressure
L/min 10 20 30 40 50 60 70
Flow Weight 0.31 kg [0.68 lb]
US gal/min 2.6 5.3 7.9 10.6 13.2 15.9 18.5 Cavity none
mm in
3C13-01
3C13-01
28.7 88.9
[1.13] [3.50]
SAE #8 (3/4-16)
(both ends)
1 2
ORDERING 3C13-01-8S-3
INFORMATION
Crack pressure
3 = 0.2 bar [3 psi]
15 = 1.0 bar [15 psi]
45 = 3.1 bar [45 psi]
65 = 4.5 bar [65 psi]
Port sizes
8S = SAE #8
OPERATION This valve allows free flow from 1 to 2 and blocks flow from 2 to 1.
87 6
45
Pressure drop
73 5
Specifications
58 4
Rated pressure 350 bar [5075 psi]
44 3 15
Rated flow at 7 bar 95 l/min
29 2 100 psi [25 US gal/min]
15 1 Leakage 5 drops/min @ Rated
3
0 pressure
L/min 20 40 60 80 100
Flow Weight 0.54 kg [1.19 lb]
US gal/min 5.3 10.6 15.9 21.1 26.4
Cavity none
3C14-01
35.1 108
[1.38] [4.25]
SAE #12 (1-1/16-12)
(both ends)
1 2
ORDERING
INFORMATION
3C14-01-12S-3
Crack pressure
3 = 0.2 bar [3 psi]
15 = 1.0 bar [15 psi]
45 = 3.1 bar [45 psi]
65 = 4.5 bar [65 psi]
Port sizes
12S = SAE #12
11141707 • Rev CB • March 2016 CV - 27
Table of Contents/Introduction Quick Reference Index
OPERATION This valve allows free flow from 1 to 2 and blocks flow from 2 to 1.
in out
r [73 ps
i] Specifications
a
Spring 5 b Rated pressure 315 bar [4500 psi]
psi]
r [7.3
0.5 ba Rated flow at 7 bar 100 l/min
Spring
100 psi [26 US gal/min]
25 50 75 100 Weight 0.21 kg [0.46 lb]
Cavity none
6.5 13 19.5 26
mm in
RS 13
RS 13
27 mm Port
1 2
77.0
[3.03]
ORDERING
INFORMATION RS 13 / 0.5 - G
Ports
G = ½ BSP
Crack Pressure
0.5 = 0.5 bar [7 psi]
5 = 5 bar [73 psi]
OPERATION This valve allows free flow from 1 to 2 and blocks flow from 2 to 1.
Specifications
73 psi] Rated pressure 280 bar [4000 psi]
Sprin g 5 bar [
Rated flow at 7 bar 140 l/min
7.3 psi] 100 psi [37 US gal/min]
Spring 0.5 bar [
Weight 0.43 kg [0.95 lb]
35 70 105 140
Cavity none
10 20 30 40
RS 19
RS 19
36 mm Port
1 2
96.0
[3.78]
ORDERING RS 19 / 0.5 - G
INFORMATION
Ports
A = SAE #12
G = 3/4 BSP
Crack Pressure
0.5 = 0.5 bar [7 psi]
5 = 5 bar [73 psi]
OPERATION This valve allows free flow from 1 to 2 and blocks flow from 2 to 1.
87 6
45
Pressure drop
73 5
Specifications
58 4
Rated pressure 350 bar [5075 psi]
44 3 15 Rated flow at 7 bar 150 l/min
29 2 100 psi [40 US gal/min]
15 1 Leakage 5 drops/min @ Rated
3
0 pressure
L/min 25 50 75 100 125 150
Flow Weight 1.00 kg [2.20 lb]
US gal/min 6.6 13.2 19.8 26.4 33.0 39.6
Cavity none
mm in
3C15-01
3C15-01
44.5 124
[1.75] [4.88]
SAE #16 (1-5/16-12)
(both ends)
1 2
ORDERING
INFORMATION 3C15-01-16S-45
Crack pressure
3 = 0.2 bar [3 psi]
15 = 1.0 bar [15 psi]
45 = 3.1 bar [45 psi]
65 = 4.5 bar [65 psi]
Port sizes
16S = SAE #16
OPERATION This valve allows free flow from 1 to 2 and blocks flow from 2 to 1.
si] Specifications
73 p
5 bar [ Rated pressure 245 bar [3500 psi]
Spring
si ] Rated flow at 7 bar 200 l/min
7.3 p
0.5 bar [
Spring 100 psi [53 US gal/min]
Weight 0.88 kg [1.94 lb]
50 100 150 200
Cavity none
13 26 39 52
RS 25
45 mm Ports
1 2
106.0
[4.18]
ORDERING RS 25 / 0.5 - G
INFORMATION
Ports
A = SAE #16
G=1 BSP
Crack Pressure
0.5 = 0.5 bar [7 psi]
5 = 5 bar [73 psi]
OPERATION This valve allows free flow from 1 to 2 and blocks flow from 2 to 1.
45
Pressure drop
87 6
Specifications
Rated pressure 350 bar [5075 psi]
58 4
15 Rated flow at 7 bar 230 l/min
29 2 100 psi [61 US gal/min]
Leakage 5 drops/min @ Rated
3
0 pressure
L/min 40 80 120 160 200 240
Flow Weight 1.91 kg [4.21 lb]
US gal/min 10.6 21.1 31.7 42.3 52.8 63.4
Cavity none
mm in
3C16-01
3C16-01
57.2 138
[2.25] [5.44]
SAE #20 (1-5/8-12)
(both ends)
1 2
ORDERING
INFORMATION 3C16-01-20S-3
Crack pressure
3 = 0.2 bar [3 psi]
15 = 1.0 bar [15 psi]
45 = 3.1 bar [45 psi]
65 = 4.5 bar [65 psi]
Port sizes
20S = SAE #20
CV - 32 11141707 • Rev CB • March 2016
Table of Contents/Introduction Quick Reference Index
OPERATION This valve allows free flow from 1 to 2 and blocks flow from 2 to 1.
87 6 45
Specifications
Pressure drop
73 5
3CM11-01
73.2
[2.88]
19.1 44.5
[0.75] [1.75]
ORDERING 3CM11-01-B-6F-6F-03
INFORMATION
Crack pressure
Guide port 3 = 0.2 bar [3 psi]
6F = SAE #6, 37° flare 15 = 1.0 bar [15 psi]
45 = 3.1 bar [45 psi]
65 = 4.5 bar [65 psi]
Body port
6F = SAE #6, 37° flare
OPERATION This valve allows free flow from 1 to 2 and blocks flow from 2 to 1.
45
87 6
Specifications
15
Rated pressure 350 bar [5075 psi]
58 4
Rated flow at 7 bar 35 l/min
29 2 3 100 psi [9 US gal/min]
Leakage 5 drops/min @ Rated
0 pressure
L/min 5 10 15 20 25 30 35
Flow Weight 0.23 kg [0.51 lb]
US gal/min 1.3 2.6 4.0 5.3 6.6 7.9 9.3
Cavity none
mm in
3CM12-01
3CM12-01
82.6
[3.25]
25.4 49.3
[1.00] [1.94]
P102 595
ORDERING 3CM12-01-B-8F-8F-03
INFORMATION
Crack pressure
Guide port 3 = 0.2 bar [3 psi]
8F = SAE #8, 37° flare 15 = 1.0 bar [15 psi]
45 = 3.1 bar [45 psi]
65 = 4.5 bar [65 psi]
Body port
8F = SAE #8, 37° flare
OPERATION This valve allows free flow from 1 to 2 and blocks flow from 2 to 1.
87 6
45
Pressure drop
73 5
Specifications
58 4
Rated pressure 350 bar [5075 psi]
44 3 15 Rated flow at 7 bar 150 l/min
29 2 100 psi [40 US gal/min]
15 1 3 Leakage 5 drops/min @ Rated
0 pressure
L/min 25 50 75 100 125 150
Flow Weight 0.85 kg [1.87 lb]
US gal/min 6.6 13.2 19.8 26.4 33.0 39.6
Cavity none
3CM15-01
120.7
[4.75]
44.5 73.2
[1.75] [2.88]
ORDERING 3CM15-01-B-16F-16F-03
INFORMATION
Crack pressure
Guide port 3 = 0.2 bar [3 psi]
16F = SAE #16, 37° flare 15 = 1.0 bar [15 psi]
45 = 3.1 bar [45 psi]
65 = 4.5 bar [65 psi]
Body port
16F = SAE #16, 37° flare
Seals Seal kit
B = Buna-N 720063
V = Viton 720064
OPERATION This valve allows free flow from 1 to 2 and restricted flow from 2 to 1.
87 6 045
Pressure drop
73 5
58 4
Specifications
44 3 015
Rated pressure 350 bar [5075 psi]
29 2
003 Rated flow at 7 bar 20 l/min
15 1
100 psi [5 US gal/min]
0 L/min 4 8 12 16 20 Weight 0.11 kg [0.24 lb]
Flow
US gal/min 1.1 2.1 3.2 4.2 5.3 Cavity none
mm in
2RN11-01
2RN11-01
19.1 69.9
[0.75] [2.75]
SAE #4 (7/16-20)
(both ends)
1 2
ORDERING
INFORMATION 2RN11-01-4S-003-021
Orifice size
021 = 0.53 mm [0.021 in]
030 = 0.76 mm [0.030 in]
Crack pressure
003 = 0.2 bar [3 psi]
Port sizes 015 = 1.0 bar [15 psi]
4S = SAE #4 045 = 3.1 bar [45 psi]
065 = 4.5 bar [65 psi]