You are on page 1of 2

Fiat barchetta Electrical equipment

Contents
55.
page page
RECHARGING - Hazardwarning light controls 43
- Battery 1 - Courtesy light control buttons 43
- Alternator 1 - Reversinglight switch 43
- Removing - refitting alternator 3 - Buzzer 44
- Servicing alternators 6 - Electric horns 44
- Checking diodes 9 - Brake lining wear sensor 44
- Low brake fluid level sensor 44
STARTING - Catalytic converter high temperature
- M. Marelli M70R -1.4/12 starter mo- sensor 44/1
tor wit~ epicyc~ic.reduction gear 12 FIAT CODE
-- Removing - refitting
Bench overhaul 12
13 .
- Introduction 45
- Checks 16 - Syst.em components 47
- Fault diagnosis 16 - Storing codes.. 50
- Manual fault diagnosIs 58
INSTRUMENT PANEL - fault diagnosis using Fiat Lancia Tester 59
- Instrument panel 17 - Emerge~cystart-up proced.ure 59
- Wiring diagram 18 - Precautions when replacing com-
- Description of wiring and connectors 19 ponen~s 60
- Description of components 20 - Replacl.ng the. tr.ansponder 61
- Removing - refitting 23 - Removing-refitting FIAT CODE ECU 63
- Removing-refitting aerial 63
fUSES AND RELAYS CAR RADIO
- Junction unit . . 24 - Car radio 64
- Fuses and relays on bracket behind - Removing-refitting components 65
glove compartment 27 ALARM
- Fusesand relays in engine bay 28 .
- Introduction 66
LIGHTING - Operation 66
- Removing-refitting
front light cluster 29 - Programming 67
- Removing-refitting fog lamps 30 - Protected programming 70
- Removing-refitting front turn sig- - Programming codes with manual ac-
nals 30 cess 71
- Removing-refitting side turn signals 30 - Part no.tesan~ specifications 72
- Removing-refitting side/brake lights - Fault diagnosIs. . 72
and rear turn signals 31 - A.larmcontrol unit Input and output
- Removing-refitting reversing lights signals 76
and rear fog lamp 31 - Location of alarm system components
- Removing-refitting number plate lights 32 on vehicle 77
- Removing-refitting courtesy light 32 AIR-BAG AND PRETENSIONERS
- Removing-refitting compartment light 32 - Introduction 78
VARIOUS DEVICES - Electroniccontrol unit 79
. . . .. . - Air bag warning light 80
- Removing-refitting Ignition key - Driver's side air bag module 80
barrel. . . . 33 - Clock spring 81
- Removlng-refl,ttlng stalk unit 34 - Passenger side air bag module 82
- Removing-refitting turn signal/hazard - Seat belt pretensioners 82
warning light flasher 34 - Automatic fault diagnosis 83
- Removing-refitting radiato'r cooling - Fault diagnosis 84
fan 36 - Safety precautionsto be observed
- Electrically-operatedwindows 39 when working on vehicles with
- Electricdoor lock 40 Air- Bag system 87
- Removing-refitting
windscreenwiper - Safety regulationsfor handling air
motor 41 bag modules 89
- Switch for handbrake warning - Scrapping air bag modules 90
light 42 - Safety regulations for handling pre-
- Controls and indicators on gear lever tensioners 91
console 42

Copyright Fiat Auto


Electrical equipment
Contents
55.
page
Fiat barchetta

.
- Electronic de-activation of passenger
side air bag 92
- Removing - refitting electronic air bag
control unit 93
- Removing driver's side air bag 94
- Removing - refitting clock spring 95
- Removing passenger side air bag 104
Refitting driver's side air bag 105
Refitting passenger side air bag 105
- Removing - refitting pretensioners 105

.
- Disenablin.£passengerside air bag ~06

COPYRIGHT Fiat Auto S.p.A.


Total or partial reproduction of the text or il-
lustrations is forbidden.

The information in this publication is inten-


ded as a guide and could be superseded as a
result of modifications adopted by the Manu-
facturer at any time due to technical and

.
commercial reasons and in accordance with
local regulations.

Fiat Auto S.p.A.


D.M.G. - M".P.S.
Servizi Post Vend ita - Tecnologie Assistenziali

.
Largo Senatore G. Agnelli, 5 - 10040 Volvera - TO (Italia)
Print no. 506.586/08 - Marzo 1998 - 750
Printed by Satiz S.p.A. - Turin (Italy)
n° ord.inazione -604.45.976-

3W998L

Publication no. 506.586/08

You might also like