Professional Documents
Culture Documents
1.1 Oral Nasal Mask Nose Block Assembly Removal” on page FCPRT-5 for
1.1.1 Oral Nasal Mask Removal this procedure.
Tools Required:
7/16 inch Open-end Wrench 2) Remove the microphone.
The oral nasal mask is easily replaced. 3) The oral nasal mask can then be pulled off the
regulator mount nut. It is held on by a snap fit.
B CAUTION 1.1.2 Inspection of Oral Nasal
The nose block device MUST be re- 1) Inspect the oral nasal mask. If it is torn, dam-
moved and reinstalled when installing aged or aged it must be replaced.
a new oral nasal mask. Simply stretch-
ing the oral nasal mask over the nose
block device can cause the oral nasal
mask to tear.
Correct WRONG
Correct installation of the oral nasal valve is extremely important to your safety.
© MMXIV Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 140130020 ON-1
Oral Nasal Mask Oral Nasal Mask
Oral/nasal
valve body
ON-2 © MMXIV Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 140130020