The document discusses tanks and piping systems, noting that piping systems interconnect pipes and components like pumps, heat exchangers, valves, and tanks to transport liquids, gases, and particles. It also describes API 650, which establishes minimum requirements for materials, design, fabrication, inspection of vertical cylindrical aboveground welded storage tanks for pressures under atmospheric pressure, up to 200°F. The standard only applies to tanks with uniform bottom support.
The document discusses tanks and piping systems, noting that piping systems interconnect pipes and components like pumps, heat exchangers, valves, and tanks to transport liquids, gases, and particles. It also describes API 650, which establishes minimum requirements for materials, design, fabrication, inspection of vertical cylindrical aboveground welded storage tanks for pressures under atmospheric pressure, up to 200°F. The standard only applies to tanks with uniform bottom support.
The document discusses tanks and piping systems, noting that piping systems interconnect pipes and components like pumps, heat exchangers, valves, and tanks to transport liquids, gases, and particles. It also describes API 650, which establishes minimum requirements for materials, design, fabrication, inspection of vertical cylindrical aboveground welded storage tanks for pressures under atmospheric pressure, up to 200°F. The standard only applies to tanks with uniform bottom support.
Jurusan Teknik Permesinan Kapal Tanks and Piping System Tank and Piping Sytem:
Pipes are used to carry liquids, gases, slurries, or fine particles. A
piping system is generally considered to include the complete interconnection of pipes, including in-line components such as pipe fittings and flanges. Pumps, heat exchanges, valves and tanks are also considered part of piping system. API 650 This standard establishes minimum requirements for material, design, fabrication, erection, and inspection for vertical, cylindrical, aboveground, closed- and open-top, welded storage tanks in various sizes and capacities for internal pressures approximating atmospheric pressure (internal pressures not exceeding the weight of the roof plates), but a higher internal pressure is permitted when additional requirements are met (see 1.1.13 in API 650). This standard applies only to tanks whose entire bottom is uniformly supported and to tanks in non-refrigerated service that have a maximum design temperature of 93 °C (200 °F) or less (see 1.1.20 in API 650) Daily Assesmen
1.Silahkan anda mencari kode dan standart
yang ada pada API 650. 2.Silahkan anda meresume kode standart yang terdapat pada API 650 yang berhubungan dengan Storage dan Tank pada piping system.