Professional Documents
Culture Documents
SPECIFICATIONS:
Filtration: 20 microns
Maximum working pressure: Sizes
03-16 600 psig
30-75 500 psig
P353A
651
FILTER DRIERS
TOTALINE® LIQUID LINE FILTER DRIERS, CAPACITY TABLE P502-8 SERIES
WATER CAPACITY† (Drops of Water)**
FLOW CAPACITY* (Tons) @ 1 PSI ∆P Refrigerant
CONNECTION
PART NO. R-134a R-22 R-404A/R507 R-410A
SIZE & TYPE
R-404A/ Liquid Line Temperature (F)
R-134a R-22 R-410A
R-507 75 125 75 125 75 125 75 125
P502-8032 1/4 SAE 2.0 2.2 1.5 2.2
P502-8032S 1/4ODF-3/8 ODM 2.7 2.9 1.9 2.9
40 37 40 33 38 37 21 19
P502-8033 3/8 SAE 3.0 3.2 2.1 3.2
P502-8033S 3/8 ODF-1/2 ODM 3.0 3.3 2.2 3.3
P502-8052 1/4 SAE 2.1 2.3 1.5 2.3
P502-8052S 1/4 ODF 3.3 3.6 2.4 3.6
116 106 114 97 109 106 64 58
P502-8053 3/8 SAE 3.5 3.8 2.5 3.8
P502-8053S 3/8 ODF 4.4 4.8 3.2 4.9
P502-8082 1/4 SAE 2.3 2.5 1.7 2.5
P502-8082S 1/4 ODF 3.1 3.4 2.3 3.4
P502-8083 3/8 ODF 4.0 4.3 2.9 4.4
237 218 235 200 224 212 159 118
P502-8083S 3/8 ODF 4.5 4.9 3.3 5.0
P502-8084 1/2 SAE 6.7 7.3 4.9 7.4
P502-8084S 1/2 ODF 7.1 7.7 5.2 7.8
P502-8162 1/4 SAE 2.3 2.4 1.6 2.5
P502-8162S 1/4 ODF 3.1 3.4 2.3 3.5
P502-8163 3/8 SAE 3.9 4.3 2.9 4.3
P502-8163S 3/8 ODF 4.4 4.8 3.2 4.9
P502-8164 1/2 SAE 7.2 7.8 5.2 7.9 371 341 368 313 350 340 206 186
P502-8164S 1/2 ODF 8.5 9.2 6.2 9.3
P502-8165 5/8 SAE 9.7 10.5 7.0 10.6
P502-8165S 5/8 ODF 10.1 10.9 7.3 11.0
P502-8167S 7/8 ODF 15.5 16.8 11.2 17.0
P502-8303 3/8 SAE 4.3 4.7 3.1
P502-8303S 3/8 ODF 6.3 6.8 4.5
P502-8304 1/2 SAE 8.1 8.8 5.9
P502-8304S 1/2 ODF 10.0 10.8 7.2
P502-8305 5/8 SAE 10.6 11.5 7.7 664 611 657 561 627 608 — —
P502-8305S 5/8 ODF 12.5 13.5 9.0
P502-8306S 3/4 ODF 14.8 16.0 10.7
P502-8307S 7/8 ODF 16.8 18.2 12.2
P502-8309S 1-1/8 ODF 19.6 21.2 14.2
P502-8413 3/8 SAE 4.3 4.7 3.1
P502-8414 1/2 SAE 10.4 11.3 7.5
P502-8414S 1/2 ODF 10.8 11.7 7.8
P502-8415 5/8 SAE 12.0 13.0 8.7 938 854 919 785 876 850 — —
P502-8415S 5/8 ODF 17.0 18.4 12.3
P502-8417S 7/8 ODF 20.3 22.0 14.7
P502-8419S 1-1/8 ODF 27.7 30.0 20.1
P502-8757S 7/8 ODF 22.2 24.0 16.1
1485 1361 1468 1247 1406 1354 — —
P502-8759S 1-1/8 ODF 32.7 35.4 23.7
*All ratings in accordance with ARI Standard 710-86. 86° F Liquid Refrigerant Temperature, 5° F Saturated Vapor Temperature, 3.1 lbs/min/ton for R-134a,
2.9 lbs/min/ton for R-22, 4.0 lbs/min/ton for R-404A/R0507.
†Water Capacities are based on: Equilibrium Point Dryness of 50 Parts Per Million for R-134a, Equilibrium Point Dryness of 60 Parts Per Million for R-22,
Equilibrium Point Dryness of 50 Parts Per Million for R-404A/R-507.
**20 drops of water =1 gram = 1cc.
652
FILTER DRIERS
ALCO EK EXTRA-KLEAN LIQUID LINE FILTER DRIER
The EK has been upgraded to include the same features as the
EKP with 20 micron final filtration and added water capacity!
SPECIFICATIONS
• Desiccant blend — 75% molecular sieve and 25% activated alumina
• Filtration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 microns
• Maximum Working Pressure:. . . . . . . . . . Sizes: 03-16 600 psig
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30-75 500 psig
• UL File Number: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SA 3124
• CSA File Number: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .LR100624
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .LR32462 P973
NOMENCLATURE
Example: EK-083S
EK 08 3 S
Drier Unit Size Connection S = ODF
Series (in cu. in.) Size (in 1/8″) Connections
(omit for SAE)
CAPACITY TABLE
FLOW CAPACITY TONS @ 1 psi ∆P WATER CAPACITY DROPS OF WATER
(For kW, multiply tons by 3.5) R-12 R-134a R-22 R-407C R-410A R-404A/507 R-502
P/N CONNECTIONS
R-22/ R-404A/
R-12 R-134a R-407C R-502 75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F
R-410A 507
EK 03 2 FM 1/4 Fem/In SAE 1.6 2.0 2.2 2.1 1.4 1.4
EK 03 2 MF 1/4 Male/In SAE 1.6 2.0 2.2 2.1 1.4 1.4
EK 03 2 1/4 SAE 1.6 2.0 2.2 2.1 1.4 1.4
EK 03 2 S 1/4 ODF 2.2 2.7 2.9 2.9 2.0 1.9 47 41 40 37 40 33 33 25 21 19 38 37 42 37
EK 03 2 SV 1/4 ODF 2.2 2.7 2.9 2.9 2.0 1.9
EK 03 3 3/8 SAE 2.5 3.0 3.3 3.2 2.2 2.1
EK 03 3 S 3/8 ODF 2.5 3.0 3.3 3.2 2.2 2.1
EK 05 2 FM 1/4 Fem/In SAE 1.7 2.1 2.3 2.2 1.5 1.5
EK 05 2 MF 1/4 Male/In ODF 1.7 2.1 2.3 2.2 1.5 1.5
EK 05 2 1/4 SAE 1.7 2.1 2.3 2.2 1.5 1.5
EK 05 2 S 1/4 ODF 2.7 3.3 3.6 3.5 2.4 2.3 133 119 116 106 114 97 95 75 64 58 109 106 120 107
EK 05 3 MF 3/8 Male/In ODF 2.9 3.5 3.8 3.7 2.5 2.5
EK 05 3 3/8 SAE 2.9 3.5 3.8 3.7 2.5 2.5
EK 05 3 S 3/8 ODF 3.6 4.4 4.8 4.7 3.2 3.1
EK 08 2 FM 1/4 Fem/In SAE 1.9 2.3 2.5 2.4 1.7 1.6
EK 08 2 MF 1/4 Male/In ODF 1.9 2.3 2.5 2.4 1.7 1.6
EK 08 2 1/4 SAE 1.9 2.3 2.5 2.4 1.7 1.6
EK 08 2 S 1/4 ODF 2.5 3.1 3.4 3.3 2.2 2.2
EK 08 25 S 5/16 ODF 2.9 3.5 3.8 3.7 2.5 2.5
274 240 237 218 235 200 195 155 159 118 224 217 245 217
EK 08 3 MF 3/8 Male/In ODF 3.3 4.0 4.3 4.3 2.9 2.8
EK 08 3 3/8 SAE 3.3 4.0 4.3 4.3 2.9 2.8
EK 08 3 S 3/8 ODF 3.7 4.5 4.9 4.8 3.3 3.2
EK 08 4 1/2 SAE 5.5 6.7 7.3 7.1 4.9 4.7
EK 08 4 S 1/2 ODF 5.8 7.1 7.7 7.5 5.1 5.0
EK 16 2 MF 1/4 Male/In ODF 1.9 2.3 2.5 2.4 1.7 1.6
EK16 2 1/4 SAE 1.9 2.3 2.5 2.4 1.7 1.6
EK16 2 S 1/4 ODF 2.5 3.1 3.4 3.3 2.2 2.2
EK 16 25 S 5/16 ODF 2.5 3.1 3.4 3.3 2.2 2.2
EK 16 3 3/8 SAE 3.2 3.9 4.2 4.1 2.8 2.7
EK 16 3 S 3/8 ODF 3.6 4.4 4.8 4.7 3.2 3.1 347 301 371 341 368 313 305 240 206 186 350 340 306 272
EK 16 4 1/2 SAE 5.9 7.2 7.8 7.7 5.2 5.1
EK 16 4 S 1/2 ODF 7.0 8.5 9.2 9.0 6.2 6.0
EK 16 5 5/8 SAE 8.0 9.7 10.5 10.3 7.0 6.8
EK 16 5 S 5/8 ODF 8.3 10.1 10.9 10.7 7.3 7.1
EK 16 7 S 7/8 ODF 12.7 15.5 16.8 16.5 11.2 10.9
EK 30 3 3/8 SAE 3.5 4.3 4.7 4.6 3.1 3.0
EK 30 3 S 3/8 ODF 5.2 6.3 6.8 6.7 4.6 4.4
EK 30 4 1/2 SAE 6.6 8.1 8.8 8.6 5.9 5.7
EK 30 4 S 1/2 ODF 8.2 10.0 10.8 10.6 7.2 7.0
EK 30 5 5/8 SAE 8.7 10.6 11.5 11.3 7.7 7.5 601 526 664 611 657 561 548 434 — — 627 608 536 477
EK 30 5 S 5/8 ODF 10.3 12.5 13.5 13.3 9.1 8.8
EK 30 6 S 3/4 ODF 12.1 14.8 16.0 15.7 10.7 10.4
EK 30 7 S 7/8 ODF 13.8 16.8 18.2 17.9 12.2 11.8
EK 30 9 S 1-1/8 ODF 16.1 19.6 21.2 20.8 14.2 13.8
EK 41 3 3/8 SAE 3.5 4.3 4.7 4.6 3.1 3.0
EK 41 4 1/2 SAE 8.5 10.4 11.3 11.1 7.5 7.3
EK 41 4 S 1/2 ODF 8.9 10.8 11.7 11.5 7.8 7.6
EK 41 5 5/8 SAE 9.8 12.0 13.0 12.8 8.7 8.5 1104 971 938 854 919 785 765 607 — — 876 850 991 884
EK 41 5 S 5/8 ODF 13.9 17.0 18.4 18.1 12.3 12.0
EK 41 7 S 7/8 ODF 16.6 20.3 22.0 21.6 14.7 14.3
EK 41 9 S 1-1/8 ODF 22.7 27.7 30.0 29.4 20.1 19.5
EK 75 7 S 7/8 ODF 18.2 22.2 24.1 23.6 16.1 15.6
2196 1932 1485 1361 1468 1247 1220 961 — — 1406 1354 1971 1760
EK 75 9 S 1-1/8 ODF 26.8 32.7 35.4 34.8 23.7 23.0
653
FILTER DRIERS
ALCO ADK BLOCK STYLE LIQUID LINE FILTER DRIERS
SPECIFICATIONS
• Desiccant Blend: Activated Alumina with Molecular Sieve
• Filtration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 microns
• Maximum Working Pressure:. . . . . Sizes: 03-16 600 psig
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-75 500 psig
• UL File Number: . . . . . . . . . . . . . . . . . . . . . . . . . . . SA 3124
• CSA File Number: . . . . . . . . . . . . . . . . . . . . . . . . .LR100624
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .LR32462
NOMENCLATURE P974
CAPACITY TABLE
FLOW CAPACITY TONS @ 1 psi ∆P WATER CAPACITY DROPS OF WATER
(For kW, multiply tons by 3.5) R-12 R-134a R-22 R-407C R-410A R-404A/507 R-502
P/N CONNECTIONS
R-404A/
R-12 R-134a R-22 R-410A R-407C R-502 75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F
507
ADK 03 2 1/4 SAE 1.6 1.9 2.1 2.1 2.0 1.4 1.3
ADK 03 2 S 1/4 ODF 1.9 2.3 2.5 2.5 2.4 1.7 1.6
64 46 44 37 34 31 31 21 27 17 47 37 43 34
ADK 03 3 3/8 SAE 2.2 2.7 2.9 2.9 2.9 2.0 1.9
ADK 03 3 S 3/8 ODF 2.5 3.0 3.3 3.3 3.2 2.2 2.1
ADK 05 2 1/4 SAE 1.6 2.0 2.2 2.2 2.1 1.4 1.4
ADK 05 2 S 1/4 ODF 2.4 2.9 3.1 3.1 3.1 2.1 2.0
130 81 68 50 58 38 47 26 44 23 73 48 73 49
ADK 05 3 3/8 SAE 3.0 3.7 4.0 4.0 3.9 2.7 2.6
ADK 05 3 S 3/8 ODF 3.7 4.5 4.9 4.9 4.8 3.3 3.2
ADK 08 2 1/4 SAE 1.6 2.0 2.2 2.2 2.1 1.4 1.4
ADK 08 2 S 1/4 ODF 2.5 3.1 3.4 3.4 3.3 2.2 2.2
ADK 08 3 3/8 SAE 3.5 4.3 4.7 4.7 4.6 3.1 3.0
188 117 101 76 87 57 68 39 63 34 109 73 105 71
ADK 08 3 S 3/8 ODF 3.4 4.2 4.6 4.6 4.5 3.0 3.0
ADK 08 4 1/2 SAE 5.5 6.7 7.3 7.3 7.1 4.9 4.7
ADK 08 4 S 1/2 ODF 5.7 7.0 7.6 7.6 7.4 5.1 4.9
ADK 16 2 1/4 SAE 1.6 2.0 2.2 2.2 2.1 1.4 1.4
ADK 16 3 1/4 SAE 3.6 4.4 4.8 4.8 4.7 3.2 3.1
ADK 16 3 S 1/4 ODF 4.0 4.9 5.3 5.3 5.2 3.6 3.5
ADK 16 4 1/2 SAE 6.8 8.3 9.0 9.0 8.8 6.0 5.8
295 204 169 140 151 117 134 86 115 67 180 143 193 145
ADK 16 4 S 1/2 ODF 7.1 8.6 9.3 9.3 9.1 6.2 6.1
ADK 16 5 5/8 SAE 9.7 11.8 12.8 12.8 12.5 8.6 8.3
ADK 16 5 S 5/8 ODF 10.7 13.1 14.2 14.2 13.9 9.5 9.2
ADK 16 7 S 7/8 ODF 13.1 16.0 17.3 17.3 17.0 11.6 11.3
ADK 30 3 3/8 SAE 3.9 4.7 5.1 — 5.0 3.4 3.3
ADK 30 4 1/2 SAE 7.1 8.6 9.3 — 9.1 6.2 6.1
ADK 30 4 S 1/2 ODF 7.2 8.8 9.5 — 9.4 6.4 6.2
ADK 30 5 5/8 SAE 11.3 13.8 15.0 — 14.7 10.0 9.7
615 444 359 278 314 218 309 212 — — 385 272 427 335
ADK 30 5 S 5/8 ODF 11.9 14.5 15.7 — 15.4 10.5 10.2
ADK 30 6 S 3/4 ODF 13.0 15.8 17.1 — 16.8 11.5 11.1
ADK 30 7 S 7/8 ODF 14.3 17.4 18.9 — 18.5 12.6 12.3
ADK 30 9 S 1-1/8 ODF 20.4 24.9 27.0 — 26.5 18.0 17.5
ADK 41 3 3/8 SAE 3.9 4.7 5.1 — 5.0 3.4 3.3
ADK 41 4 1/2 SAE 8.0 9.8 10.6 — 10.4 7.1 6.9
ADK 41 4 S 1/2 ODF 8.8 10.7 11.6 — 11.4 7.8 7.5
ADK 41 5 5/8 SAE 12.8 15.6 16.9 — 16.6 11.3 11.0 728 480 502 391 440 309 302 186 — — 537 387 445 322
ADK 41 5 S 5/8 ODF 13.5 16.5 17.9 — 17.5 12.0 11.6
ADK 41 7 S 7/8 ODF 16.6 20.3 22.0 — 21.6 14.7 14.3
ADK 41 9 S 1-1/8 ODF 20.7 25.2 27.3 — 26.8 18.3 17.7
ADK 75 7 S 7/8 ODF 28.0 34.2 37.1 — 36.3 24.8 24.1
1369 899 940 730 823 576 562 343 — — 1008 719 833 600
ADK 75 9 S 1-1/8 ODF 30.6 37.3 40.4 — 39.6 27.0 26.3
654
FILTER DRIERS
ALCO BOK-HH LIQUID LINE BURNOUT FILTER DRIERS
APPLICATION
• Alco’s BOK-HH incorporates an HH blended solid core for
the effective clean-up of systems following a severe burnout.
• Liquid line filter drier for burnout clean-up and wax removal.
SPECIFICATIONS
• Filtration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 microns
• Maximum Working Pressure: . . . . .Sizes: 08-16 600 psig
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-41 500 psig P981
• UL File Number: . . . . . . . . . . . . . . . . . . . . . . . . . . . . SA 3124
• CSA File Number: . . . . . . . . . . . . . . . . . . . . . . . . LR100624
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LR32462
NOMENCLATURE
BOK 30 5 S HH
Series Unit Size Connection S = ODF Charcoal
(in cu. in.) Size (in 1/8″)
Connection Blend
(omit for
SAE)
Above example: BOK 305S-HH
655
FILTER DRIERS
ALCO UDK ULTRA-DRY KLEANER LIQUID LINE FILTER DRIER
FEATURES
• Solid copper connections.
• Ultra high moisture capacity.
• Meets or exceeds all compressor manufacturer desiccant
standards.
• Corrosion resistant epoxy powder paint finish.
SPECIFICATIONS
• Desiccant blend — 75% molecular sieve and 25% activated
alumina.
P4398
• Filtration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 microns
• Maximum Working Pressure: . . . . .Sizes: 03-16 600 psig
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-75 500 psig
• UL File Number: . . . . . . . . . . . . . . . . . . . . . . . . . . . . SA 3124
• CSA File Number: . . . . . . . . . . . . . . . . . . . . . . . . LR100624
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LR32462
NOMENCLATURE
UDK 08 3 S
Series Unit Size Connection Size S = ODF
(in cu. in.) (in 1/8″) Connection
(omit for SAE)
Above example: UDK 083S
656
FILTER DRIERS
ALCO ALF LIQUID FILTER DRIER
APPLICATION
• Liquid line filter.
• Recovery, recycle and reclaim filter.
SPECIFICATIONS
• Filtration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 microns
• Maximum Working Pressure: . . . . . . . . . . . . . . . . . . 500 psig
• UL File Number:. . . . . . . . . . . . . . . . . . . . . . . . . . . . SA 3124
• CSA File Number: . . . . . . . . . . . . . . . . . . . . . . . . LR100624
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LR32462
P4402
NOMENCLATURE
Example: ALF 033S
ALF 03 3 S
Series Unit Connection S = ODF
Size Size Connection Style
Inlet: (in 1/8″) Omit for SAE (Male In-Male Out)
MF = Male SAE In - Female SAE Out
FM = Female SAE In - Male SAE Out
657
FILTER DRIERS
ALCO BFK/EBF LIQUID LINE BI-DIRECTIONAL HEAT PUMP FILTER DRIER
APPLICATION
• Bi-directional liquid line filter drier for heat pump applications.
• For use with CFC, HCFC, HFC refrigerants.
SPECIFICATIONS
• Desiccant blend — 75% molecular sieve and 25% activated
alumina (Bead)
• Filtration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 microns
• Maximum Working Pressure: . . . . .Sizes: 05-16 600 psig P988
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 500 psig
• UL File Number: . . . . . . . . . . . . . . . . . . . . . . . . . . . . SA 3124
• CSA File Number . . . . . . . . . . . . . . . . . . . . . . . . . LR100624
NOMENCLATURE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LR32462
Example: BFK 165S
BFK 16 5 S
Series Unit Size Connection Size S = ODF
(in cu. in.) (in 1/8″) Connection
(omit for SAE)
658
FILTER DRIERS
TOTALINE® LIQUID LINE BURNOUT FILTER DRIERS — P508 SERIES
PART NUMBER SIGNIFICANCE
P
TYPE OF CONNECTION
CUBIC INCHES S = SOLDER
P365
OF DESICCANT NO LETTER = MALE x MALE FLARE
503-8 SUCTION LINE FILTER DRIERS (EXCEPT CORE SHELLS
APPLICATION 507-8 SUCTION LINE FILTERS WHICH ARE SOLDER)
The P508 series liquid line filter drier was 508-8 LIQUID LINE BURNOUT CLEANER
designed for maximum effectiveness in the FILTER DRIERS
cleanup of systems following a severe FITTING SIZE IN EIGHTHS OF AN INCH
burnout where a maximum capacity for
water and acids is essential.
FEATURES
This series utilizes a molded block of acti- • Corrosion Resistant Epoxy Powder Paint Finish
vated alumina, molecular sieve, and • Rugged Steel Shell (Shock Resistant Construction)
activated carbon. This blend of activated
• Wax Control for Low Temperature Applications
alumina and activated carbon will remove
the acids and products of a compressor • Extra Moisture and Acid Removal Capacity
burnout. SPECIFICATIONS
SELECTION PROCEDURE • Filtration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 microns
The P508 Series Burnout Drier should be • Maximum Working Pressure . . . . . . . . . 02-16 (600 psig)
sized to one size larger than the existing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-41 (500 psig)
liquid line drier.
DIMENSIONAL DATA TOTALINE LIQUID LINE BURNOUT FILTER DRIER PHYSICAL DATA
DIMENSIONS
P/N Connection Ship Wt
A B D E F*
Size (Lbs)
P508-8082 1/4 SAE 5-5/8 — —
P508-8083 3/8 SAE 5-15/16 — —
3-15/16 2-15/16 1
P508-8162 1/4 SAE 6-7/16 — —
P508-8163 3/8 SAE 6-3/4 — —
P508-8163S 3/8 ODF 6-1/8 5-1/4 7/16
P508-8164 1/2 SAE 6-15/16 — —
*Indicates lay-in length. 4-5/8 2-7/8 2
P508-8164S 1/2 ODF 6-3/16 5-3/16 1/2
P508-8303 5/8 SAE 7-7/16 — —
P508-8165S 5/8 ODF 6-3/8 5-1/8 5/8
P508-8303 3/8 SAE 9-5/8 — —
P508-8304 1/2 SAE 9-7/8 — —
P508-8304S 1/2 ODF 9-1/8 8-1/8 1/2 7-1/2 3-1/16 3-3/4
P508-8305 5/8 SAE 10-5/16 — —
P508-8305S 5/8 ODF 9-5/16 8-1/16 5/8
P508-8414 1/2 SAE 10 — —
P508-8415 5/8 SAE 9-1/4 8-1/4 1/2
7-5/8 3-11/16 4-3/4
P508-8417S 7/8 ODF 10-7/16 — —
P365A
*Does not include weld bead.
659
FILTER DRIERS
TOTALINE® LIQUID LINE BURNOUT FILTER DRIERS — P508 SERIES
P508-8 SERIES CAPACITY TABLE
FLOW CAPACITY TONS @ 1 psi ∆P WATER CAPACITY DROPS OF WATER
(For kW, multiply tons by 3.5) R-12 R-134a R-22 R-407C R-410A R-404A/507 R-502
P/N CONNECTIONS
R-404A/
R-12 R-134a R-22 R-410A R-407C R-502 75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F
507
P508-8082 1/4 SAE 1.2 1.5 1.6 1.6 1.6 1.1 1.0
180 118 88 71 78 59 74 45 66 38 98 71 109 79
P508-8083 3/8 SAE 3.2 3.9 4.2 4.2 4.1 2.8 2.7
P508-8162 1/4 SAE 1.2 1.5 1.6 1.6 1.6 1.1 1.0
P508-8163 3/8 SAE 3.6 4.3 4.7 4.7 4.6 3.1 3.1
P508-8163S 3/8 ODF 4.8 5.8 6.3 6.3 6.2 4.2 4.1
P508-8164 1/2 SAE 7.0 8.6 9.3 9.3 9.1 6.2 6.0 209 143 171 141 153 117 91 56 77 41 182 141 135 100
P508-8164S 1/2 ODF 8.4 10.2 11.1 11.1 10.9 7.4 7.2
P508-8303 5/8 SAE 10.5 12.8 13.9 13.9 13.6 9.3 9.0
P508-8165S 5/8 ODF 10.5 12.8 13.9 13.9 13.6 9.3 9.0
P508-8303 3/8 SAE 3.6 4.3 4.7 — 4.6 3.1 3.1
P508-8304 1/2 SAE 8.1 9.9 10.7 — 10.5 7.2 7.0
P508-8304S 1/2 ODF 8.9 10.8 11.7 — 11.5 7.8 7.6 552 367 300 245 267 204 234 146 — — 318 247 342 249
P508-8305 5/8 SAE 11.1 13.5 14.6 — 14.3 9.8 9.5
P508-8305S 5/8 ODF 12.0 14.6 15.8 — 15.5 10.6 10.3
P508-8414 1/2 SAE 8.4 10.2 11.1 — 10.9 7.4 7.2
P508-8415 5/8 SAE 13.4 16.3 17.7 — 17.4 11.8 11.5 623 410 427 344 379 282 256 155 — — 454 342 380 274
P508-8417S 7/8 ODF 16.3 19.8 21.5 — 21.1 14.4 14.0
660
FILTER DRIERS
TOTALINE® STANDARD CAPACITY SUCTION LINE FILTER DRIERS
— P503-C SERIES
PART NUMBER SIGNIFICANCE
P
TYPE OF CONNECTION
P503 SUCTION LINE S = SOLDER
P388X NO LETTER = MOLEX MALE FLARE
FILTER DRIERS
P388B
661
FILTER DRIERS
TOTALINE® HIGH CAPACITY SUCTION LINE FILTER DRIERS — P503-8 SERIES
PART NUMBER SIGNIFICANCE
P
APPLICATION
• Premium suction line filter drier for moisture, acid and contaminant removal.
• For use with CFC, HCFC, and HFC refrigerants.
• Totaline’s P503-8 Series is a high capacity suction line filter drier that
incorporates beaded desiccant plus a filter.
FEATURES
• Dual Access Valves
• Corrosion Resistant Paint Finish
• High Filtration Capacity
SPECIFICATIONS
• Filtration: 40 microns
• Maximum Working Pressure: 500 PSIG
662
FILTER DRIERS
TOTALINE® HIGH CAPACITY SUCTION LINE FILTER DRIERS — P503-8 SERIES
P503-8 CAPACITY TABLE
FLOW CAPACITY IN TONS REFRIGERANT (For kW, Multiply Tons by 3.5)
R-12 R-134a R-22 R-407C
CONNECTION Evaporator Temperature (°F)
P/N (Size and
Type) 40 20 0 –20 40 20 0 –20 40 20 0 –20 –40 40 20 0 –20 –40
Pressure Drop (PSI)
2 1.5 1 0.5 2 1.5 1 0.5 3 2 1.5 1 0.5 3 2 1.5 1 0.5
P503-8083S 3/8 ODF 1.1 0.6 0.5 0.5 1.1 0.6 0.5 0.4 2.3 1.3 0.9 0.6 0.5 2.6 1.5 1.1 0.7 0.7
P503-8084S 1/2 ODF 1.8 1.2 0.8 0.7 1.9 1.2 0.8 0.6 3.8 2.1 1.4 1 0.8 4.2 2.4 1.7 1.2 1.1
P503-8135 5/8 SAE 2.1 1.4 1.1 0.9 2.2 1.4 1 0.8 4.4 2.5 1.7 1.2 0.9 4.9 2.9 2.1 1.5 1.2
P503-8135S 5/8 ODF 2.8 1.9 1.4 1.1 2.9 1.9 1.3 1 5.8 3.2 2.2 1.6 1 6.5 3.7 2.7 2.0 1.3
P503-8166S 3/4 ODF 3.8 2.5 1.8 1.2 3.9 2.5 1.7 1.1 7 4.6 3.2 2 1.1 7.8 5.3 3.9 2.5 1.5
P503-8167S 7/8 ODF 5.0 3.6 2.3 1.5 5.1 3.5 2.2 1.3 9.2 6 4.1 2.6 1.4 10 6.9 4.9 3.2 1.9
P503-8219S 1-1/8 ODF 7.1 5.0 3.2 1.8 7.3 4.9 3 1.6 13.2 8.5 5.7 3.5 1.8 15 9.7 6.9 4.3 2.4
P503-83511S 1-3/8 ODF 8.6 5.9 3.7 2.0 8.8 5.8 3.5 1.8 16.2 10.2 6.7 4 2 18 12 8.1 4.9 2.7
P503-83813S 1-5/8 ODF 9.0 6.2 3.9 2.1 9.3 6.1 3.7 1.9 17.3 10.7 7 4.2 2.1 19 12 8.4 5.2 2.8
663
FILTER DRIERS
TOTALINE® SUCTION LINE FILTER DRIER WITH CHARCOAL — P503 SERIES
APPLICATION
• Solid core with special blend to maximize acid, moisture, and wax removal.
• For use with CFC, HCFC and HFC refrigerants.
FEATURES
• Charcoal blend for soluble contaminant and wax removal. P357
• Dual access valve.
SPECIFICATION
Maximum Working Pressure: 500 PSIG
Filtration: 40 microns
UL & CSA Approved.
SNB
P503-8S SUCTION LINE FILTER DRIERS DUAL ACCESS VALVES AND
CHARCOAL BLEND
DIMENSIONAL DATA TOTALINE SUCTION LINE FILTER DRIER WITH CHARCOAL PHYSICAL DATA
664
FILTER DRIERS
TOTALINE® SUCTION LINE FILTER DRIER WITH CHARCOAL — P503 SERIES
P503-8 CAPACITY TABLE
FLOW CAPACITY IN TONS REFRIGERANT (For kW, Multiply Tons by 3.5)
R-12 R-134a R-22 R-407C
CONNECTION Evaporator Temperature (°F)
P/N (Size and
Type) 40 20 0 –20 40 20 0 –20 40 20 0 –20 –40 40 20 0 –20 –40
Pressure Drop (PSI)
2 1.5 1 0.5 2 1.5 1 0.5 3 2 1.5 1 0.5 3 2 1.5 1 0.5
P503-8165SVB 5/8 ODF 1.9 1.4 0.8 0.6 2 1.4 0.8 0.5 3.4 2.1 1.4 0.9 0.4 3.8 2.4 1.7 1.1 0.5
P503-8166SVB 3/4 ODF 2.4 1.7 1.1 0.7 2.5 1.7 1 0.6 4.2 2.6 1.7 1 0.5 4.7 3 2.1 1.2 0.7
P503-8167SVB 7/8 ODF 2.6 1.8 1.2 0.7 2.7 1.8 1.1 0.6 4.6 2.8 1.9 1.1 0.6 5.1 3.2 2.3 1.4 0.8
P503-8306SVB 3/4 ODF 3.3 2.3 1.5 0.9 3.4 2.3 1.4 0.8 5.5 3.5 2.3 1.4 0.8 6.1 4 2.8 1.7 1.1
P503-8307SVB 7/8 ODF 3.5 2.5 1.6 0.9 3.6 2.5 1.5 0.8 6.1 3.8 2.5 1.5 0.8 6.8 4.4 3 1.9 1.1
P503-8309SVB 1-1/8 ODF 3.8 2.6 1.7 0.9 3.9 2.6 1.6 0.8 6.5 4 2.6 1.6 0.8 7.2 4.6 3.1 2 1.1
665
FILTER DRIERS
TOTALINE® STANDARD CAPACITY SUCTION LINE FILTER DRIERS
— P503-8 SERIES
PART NUMBER SIGNIFICANCE
P
STANDARD SUCTION
CUBIC INCHES FILTER DRIER
OF DESICCANT TYPE OF CONNECTION
P358
S = ODF
503-8 SUCTION LINE FILTER DRIERS F = SAE
DIMENSIONAL DATA
P358A
666
FILTER DRIERS
TOTALINE® STANDARD CAPACITY SUCTION LINE FILTER DRIERS
— P503-8 SERIES
P503-8 CAPACITY TABLE
FLOW CAPACITY IN TONS REFRIGERANT (For kW, Multiply Tons by 3.5)
R-12 R-134a R-22 R-407C
CONNECTION Evaporator Temperature (°F)
P/N (Size and
Type) 40 20 0 –20 40 20 0 –20 40 20 0 –20 –40 40 20 0 –20 –40
Pressure Drop (PSI)
2 1.5 1 0.5 2 1.5 1 0.5 3 2 1.5 1 0.5 3 2 1.5 1 0.5
P503-8133FSFD 3/8 SAE 0.7 0.4 0.2 0.1 0.7 0.4 0.2 0.1 1.4 0.8 0.4 0.2 0.1 1.6 0.9 0.5 0.2 0.1
P503-8133SSFD 3/8 ODF 1.3 0.8 0.5 0.2 1.3 0.8 0.5 0.2 2.2 1.3 0.8 0.5 0.2 2.4 1.5 1 0.6 0.3
P503-8134FSFD 1/2 SAE 1.5 1 0.6 0.3 1.5 1 0.6 0.3 2.4 1.6 1.1 0.7 0.4 2.7 1.8 1.3 0.9 0.5
P503-8134SSFD 1/2 ODF 2.2 1.5 1.1 0.6 2.3 1.5 1 0.5 3.5 2.3 1.6 1 0.6 3.9 2.6 1.9 1.2 0.8
P503-8135FSFD 5/8 SAE 2.4 1.7 1.2 0.7 2.5 1.7 1.1 0.6 3.7 2.4 1.6 1 0.6 4.1 2.8 1.9 1.2 0.8
P503-8135SSFD 5/8 ODF 3 2.1 1.4 0.8 3.1 2.1 1.3 0.7 4.9 3.2 2.2 1.4 0.8 5.5 3.7 2.7 1.7 1.1
P503-8136SSFD 3/8 ODF 4 2.7 1.8 1 4.1 2.7 1.7 0.9 6.4 4.2 2.8 1.8 1 7.1 4.8 3.4 2.2 1.3
P503-8137SSFD 7/8 ODF 4.3 3.1 2 1.1 4.4 3 1.9 1 7.2 4.6 3 1.9 1 8 5.3 3.6 2.3 1.3
P503-8277SSFD 7/8 ODF 4.6 3.2 2 1.1 4.7 3.1 1.9 1 7.5 4.8 3.2 2 1.1 8.3 5.5 3.9 2.5 1.5
P503-8279SSFD 1-1/8 ODF 5.1 3.5 2.1 1.1 5.2 3.4 2 1 8.5 5.4 3.5 2.1 1.1 9.5 6.2 4.2 2.6 1.5
P503-85411SSFD 1-3/8 ODF 4.4 2.9 1.8 1 4.5 2.9 1.7 0.9 7.3 4.6 3 1.8 1 8.1 5.3 3.6 2.2 1.3
P503-85413SSFD 1-5/8 ODF 4.5 3.1 1.9 1 4.6 3 1.8 0.9 7.4 4.7 3.2 2 1 8.2 5.4 3.9 2.5 1.3
667
FILTER DRIERS
ALCO ASD PLUS SUCTION LINE FILTER DRIER
• Rugged steel shells for shock resistance
• Low pressure drop - full flow fittings
• Dual access valves
• Solid copper sweat connections
• Corrosion resistant epoxy powder paint finish
NOMENCLATURE/SELECTION
P977
ASD 35 S 5 VV
Series Unit Size S = ODF Connection Suction Line
(in cu. in.) Connections Size Service
F = SAE (in 1/8″) DIMENSIONS SHIP.
CATALOG CONNECTION
Above example: ASD 35S5VV WEIGHT
NUMBER SIZE A B C D E* (lbs)
ASD 28S3VV 3/8 ODF 5-19/32 4-23/32 7/16
4-1/8 2
ASD 28S4VV 1/2 ODF 5-11/16 4-11/16 1/2
DIMENSIONAL DATA ASD 35F5VV 5/8 SAE 7-9/16 -- --
4-3/4 2-1/2
ASD 35S5VV 5/8 ODF 6-17/32 5-9/32 5/8
ASD 45S6VV 3/4 ODF 7-3/4 6-1/2 5/8 3-11/16
5-9/16 3
ASD 45S7VV 7/8 ODF 7-15/16 6-7/16 3/4
ASD 50S9VV 1-1/8 ODF 8-27/32 7-1/32 29/32 6-1/8 3-1/2
ASD 75S11VV 1-3/8 ODF 12-1/4 10-5/16 31/32
8-1/4 5
ASD 75S13VV 1-5/8 ODF 12-5/32 9-29/32 1-1/8
*Does not include weld bead.
668
FILTER DRIERS
ALCO SFD SUCTION LINE FILTER DRIER
• Solid copper fittings
• Dual access valves
• Rugged steel shells for shock resistance
• Corrosion resistant epoxy powder paint finish
• Low pressure drop - full flow fittings
Filtration recommendation: 40 microns
Maximum working pressure: 400 PSIG
P978
NOMENCLATURE/SELECTION
SFD 13 S 5 VV
Series Unit Size S = ODF Connection Suction Line
(in cu. in.)Connections Size Service
F = SAE (in 1/8″) DIMENSIONAL DATA
Above example: SFD 13S5-VV
669
FILTER DRIERS
ALCO ASK-HH SUCTION LINE FILTER DRIER
All Alco filter driers are specifically designed to protect the
refrigerant system from liquid and solid contaminants. They
incorporate a desiccant specially formulated and blended for
maximum moisture, and include advanced materials to remove
acid and contaminants.
FEATURES
• Full flow fittings for low pressure drop P353
DIMENSIONAL DATA
CONNEC- DIMENSIONS SHIP
P/N TION SIZE WEIGHT
& STYLE A B D E F* (lbs)
ASK 165S-VV-HH 5/8 ODF 6-3/8 5-1/8 5/8
ASK 166S-VV-HH 3/8 ODF 6-3/4 5-1/2 3/8 4-5/8 2-7/8 2
ASK 167S-VV-HH 7/8 ODF 6-15/16 5-7/16 3/4
ASK 306S-VV-HH 3/4 ODF 9-11/16 8-9/16 5/8
ASK 307S-VV-HH 7/8 ODF 9-7/8 8-3/8 3/4 7-1/2 3-1/16 3-3/4
ASK 309S-VV-HH 1-1/8 ODF 10-3/16 8-3/8 15/16
*Dimension does not include weld bead.
670
FILTER DRIERS
ALCO CSFD COMPACT SUCTION LINE FILTER DRIER
The Alco CSFD filter drier should be used for motor burnout
clean-up applications. It uses a molded desiccant core block that
effectively removes and holds a maximum amount of contaminants
with a minimum pressure drop.
FEATURES
• For use with HCFCs, CFCs, and the lubricants that go with them
• Dual access valves
• Solid block desiccant core
P2019
• High acid removal
• Solid copper ODF fittings
• Corrosion resistant epoxy powder paint finish
SPECIFICATIONS
Maximum working pressure: 500 psig
UL file number: SA 3124
CSA file number: LR 100624
DIMENSIONAL DATA
671
FILTER DRIERS
ALCO ASF PLUS SUCTION LINE FILTER (FILTERS ONLY)
FEATURES
• Rugged steel shells for shock resistance
• Low pressure drop - full flow fittings
• Dual access valves
• Solid copper fittings - easy to sweat in
• Corrosion resistant epoxy powder paint finish P980
SPECIFICATIONS
NOMENCLATURE
Filtration recommendation: 40 microns
Maximum working pressure: 500 psig ASF 35 S 5 VV
UL file number: SA 3124 Series Unit Size S = ODF Connection Suction Line
CSA file number: LR 100624 (in cu. in.) Connection Size Service
LR 32462 F = SAE (in 1/8″)
Above example: ASF 35S5-VV
DIMENSIONAL DATA
DIMENSIONS SHIP
CONNECT-
P/N WEIGHT
ION SIZE A B C D E* (lbs)
ASF 11S4 1/2 ODF 4- 3/8 3-3/8 1/2
2-7/8 2-5/8 1-1/2
ASF 11S5 5/8 ODF 4- 5/8 3-3/8 5/8
ASF 28S3-VV 3/8 ODF 5-19/32 4-23/32 7/16
4-1/8 2
ASF 28S4-VV 1/2 ODF 5-11/16 4-11/16 1/2
ASF 35F5-VV 5/8 SAE 7-9/16 -- --
4-3/4 2-1/2
ASF 35S5-VV 5/8 ODF 6-17/32 5-9/32 5/8 3-11/16
ASF 45S6-VV 3/4 ODF 7-3/4 6-1/2 5/8
5-9/16 3
ASF 45S7-VV 7/8 ODF 7-15/16 6-7/16 3/4
ASF 50S9-VV 1-1/8 ODF 8-27/32 7-1/32 29/32 6-1/8 3-1/2
P980A 1
ASF 64S17-V 2-1/8 ODF 11-3/4 9-1/16 7-5/8
5/16 6-1/2
ASF 64S21-V 2-5/8 ODF 13 10 1-1/2 7-7/8 5
ASF 75S11-VV 1-3/8 ODF 12-1/4 10-5/16 31/32
8-1/4 5
ASF 75S13-VV 1-5/8 ODF 12-5/32 9-29/32 1-1/8
*Does not include weld bead.
672
FILTER DRIERS
TOTALINE® SUCTION LINE FILTER — P507-8 SERIES
PART NUMBER SIGNIFICANCE
P
P356A
673
FILTER DRIERS
TOTALINE® SUCTION LINE FILTER — P507-8 SERIES
CAPACITY TABLE
FLOW CAPACITY IN TONS REFRIGERANT (For kW, Multiply Tons by 3.5)
R-12 R-134a R-22 R-407C
CONNECTION Evaporator Temperature (°F)
P/N (Size and
Type) 40 20 0 –20 40 20 0 –20 40 20 0 –20 –40 40 20 0 –20 –40
Pressure Drop (PSI)
2 1.5 1 0.5 2 1.5 1 0.5 3 2 1.5 1 0.5 3 2 1.5 1 0.5
P507-8214S 1/2 ODF 1.9 1.3 0.9 0.8 2 1.3 0.9 0.7 4.1 2.3 1.6 1.2 0.9 4.6 2.6 1.9 1.5 1.2
P507-8355 5/8 SAE 2.2 1.5 1.1 0.9 2.3 1.5 1 0.8 4.7 2.6 1.8 1.3 1 5.2 3 2.2 1.6 1.3
P507-8355S 5/8 ODF 3.2 2.2 1.6 1.4 3.3 2.2 1.5 1.2 6.6 3.7 2.6 1.9 1.6 7.3 4.2 3.1 2.3 2.1
P507-8456S 3/4 ODF 4.7 3.2 2.3 1.8 4.8 3.1 2.2 1.6 9.8 5.5 3.7 2.7 2.2 11 6.3 4.5 3.3 3
P507-8457S 7/8 ODF 6.5 4.8 3.3 1.9 6.7 4.7 3.1 1.7 12 8 5.6 3.6 3 13 9.2 6.8 4.4 4
P507-8569S 1-1/8 ODF 9.2 6.8 4.5 2.6 9.5 6.7 4.3 2.3 19 12 8.2 4.9 2.6 21 14 9.9 6 3.5
P507-89011S 1-3/8 ODF 11.7 8.8 5.9 3.4 12 8.7 5.6 3 24 15 10 6.5 3.2 27 17 12 8 4.3
674
FILTER DRIERS
TOTALINE® HEAT PUMP FILTER DRIERS — P504 SERIES
PART NUMBER SIGNIFICANCE
P
P359
CUBIC INCHES TYPE OF CONNECTION
OF DESICCANT S = SOLDER
504-8 HEAT PUMP MF = MALE x FEMALE FLARE
FILTER DRIERS FM = FEMALE x MALE FLARE
NO LETTER = MALE x MALE FLARE
APPLICATION
Available in two basic sizes, Totaline New Bi-Directional Filter Drier provides heat FITTING SIZE IN EIGHTHS OF AN INCH
pump system protection in heating and cooling cycles summer and winter ... with
one compact unit. It reduces complex piping and the resulting costs.
FEATURES
• Removes moisture, acids and solids.
• Bi-Directional...Eliminates need for external check valves.
• Sealed type.
• Corrosion resistant epoxy powder paint finish.
• May be mounted in any position.
• Reduces compressor maintenance.
• Solid copper sweat connections.
• Desiccant blend — 75% molecular sieve and 25% activated alumina.
SPECIFICATIONS
• Filtration: 40 microns
• Maximum Working Pressure: 600 PSIG
DIMENSIONAL DATA
P4403B
P4403A
PHYSICAL DATA
675
FILTER DRIERS
TOTALINE® HEAT PUMP FILTER DRIERS — P504 SERIES
INTERNAL CONSTRUCTION BASIC FLOW PATTERNS
P2561 P2562
676
FILTER DRIERS
ALCO AOFD 553 OIL FILTER DRIER
ALCO’s AOFD is designed specifically for refrigerant systems
that use POE oil. POE oil is hygroscopic in nature, which
means that it attracts and absorbs water. Moisture in a closed
system can produce acid and will harm the compressor.
ALCO’s AOFD protects compressors by removing moisture
and trapping contaminants.
FEATURES
• Designed to clean and dry POE Oil
• 3/8″ male flare connections for easy replacement P2022
• Large filter surface area to provide maximum filtration
• Contains 100% molecular sieve XH-9 Desiccant for
moisture removal
AOFD WATER CAPACITY TABLE
• Designed to operate at a very low pressure drop
• 10 micron filtration for optimum oil cleaning REFRIGERANT DROPS
TYPE @ 125° F
R-22 497
R-134a 518
R-404A 518
DIMENSIONAL DATA R-407C 435
677
FILTER DRIERS
HENRY CAPILLARY TUBE REFRIGERANT DRIERS
• 100% MOLECULAR SIEVES
• COPPER TUBE BODY
P366 • SEALED EXTENDED COPPER ENDS
• MAXIMUM WORKING PRESSURE - 350 PSIG
678
FILTER DRIERS
SPORLAN CATCH-ALL SEALED TYPE
The universal acceptance of the Catch-All Filter Drier is due to excellent ability to clean up the oil, is responsible for the excellent
its unique molded porous core, consisting of a blend of highly field performance in cleaning up severely contaminated systems.
effective desiccants. The quality features built into it assure years OIL SLUDGE AND VARNISH — Even the best refrigeration oils
of service on any refrigeration system. break down to produce varnish, sludge, and organic acids. Only
MOISTURE — The Catch-All Filter Drier removes moisture from the Catch-All Filter Drier is capable of removing these products
the refrigerant by adsorbing and retaining it deep within the desic- of oil decomposition.
cant granules. The CW line of Catch-Alls is designed for use with SPECIAL APPLICATIONS — A special “HH” core Catch-All
polyolester oils and features approximately twice the water capac- Filter Drier is available to remove wax which frequently causes
ity of a standard Catch-All. difficulty on low temperature Refrigerant 22 and 502 systems. For
FOREIGN MATTER — The Catch-All Filter Drier will filter out cap tube systems, use the C-032-CAP or CW-032-CAP Catch-All
scale, solder particles, carbon, sludge, dirt, or any other foreign which has fittings suitable for attaching to any size capillary tube.
matter with negligible pressure drop. Fine particles that would go Remember…It’s not how much moisture you remove from a
through an ordinary strainer are removed down to a minimum size refrigeration system that counts, it’s how little moisture is
in one pass filtration. The large filtering area of the Catch-All Fil- left.
ter Drier core permits it to collect a large amount of dirt without
plug up.
ACID — The Catch-All Filter Drier is unexcelled in acid removal
ability. The hydrochloric, hydrofluoric, and various organic acids
are adsorbed and held by the desiccant in a manner similar to the
adsorption of moisture. Tests have demonstrated that the
Catch-All Filter Drier will remove over 10 times as much acid as
the desiccant used in most driers. This ability, along with its P4164
679
FILTER DRIERS
SPORLAN CATCH-ALL REPLACEABLE CORE TYPE
REPLACEABLE CORE TYPE – Liquid Line Application
ODF Solder Connections – Refrigerants R-12, R-22, R-134a, R-404A, R-407C, R-502, R-507
Also Compatible with Refrigerants R-123, R-124, R-125, R-401A & B, R-402A & B, R-408A, R-409A
CONNECTIONS VOLUME OF MOUNTING OVERALL
NO. OF CORE
TYPE (in.) DESICCANT BRACKET LENGTH
CORES PART NO.
ODF Solder (cu in.) S (in.)
C-R425 5/8 RCW-42 9.06
C-R427 7/8 1 or 42 A-175-1 9.44
C-485 5/8 RC-4267 9.15
C-485-G 5/8 9.15
C-487 7/8 9.30
C-487-G 7/8 1 48 A-685 9.30
C-489-G 1-1/8 9.50
C-4811-G 1-3/8 9.60
C-4813-G 1-5/8 9.60
C-967 7/8 14.84
C-967-G 7/8 14.84
C-969 1-1/8 2 96 A-685 15.04
C-969-G 1-1/8 RCW-48, 15.04
C-9611-G 1-3/8 RC-4864, 15.14
C-9613-G 1-5/8 or 15.14
C-1449 1-1/8 RC-4864-HH 20.58
C-1449-G 1-1/8 20.58 P4165
C-14411 1-3/8 3 144 A-685 20.68
C-14411-G 1-3/8 20.68
C-14413-G 1-5/8 20.68
C-19211 1-3/8 26.22
C-19211-G 1-3/8 26.22
C-19213 1-5/8 4 192 A-685 26.22
C-19213-G 1-5/8 26.22
C-19217-G 2-1/8 26.22
C-30013 1-5/8 27.94
C-30013-G 1-5/8 3 300 A-175-2 27.94
C-30017-G 2-1/8 28.06
RCW-100,
C-40017 2-1/8 RC-10098, 34.56
C-40017-G 2-1/8 or 34.56
C-40021-G 2-5/8 34.75
C-40025-G 3-1/8 4 RC-10098-HH 400 A-175-2 34.44
C-40029-G 3-5/8 34.81 P4166
C-40033-G 4-1/8 35.12
NPT PIPE CONNECTIONS
C-484-P 1/2 1 RCW-48, 48 9.08
C-966-P 3/4 2 RC-4864, or 96 14.67
A-685
C-1448-P 1 3 RC-4864-HH 144 20.42
C-19212-P 1-1/2 4 192 25.85
RCW-100,
C-40016-P 2 4 RC-10098, or 400 A-175-2 34.44
RC-10098-HH
Listed by Underwriters’ Laboratories Inc. — Guide-SMGT-File No. SA-1756A& B and Canadian Standards Associ-
ation — File LR-19953.
Maximum rated pressure of 500 psi, except for the Type C-R240 Series which has a maximum rated pressure of
400 psi. Type numbers with G suffix indicate that unit is supplied with 1/49 female pipe connection in the end
plate and pipe plug…For liquid line service an angle charging valve for system charging purposes can be installed
in place of the pipe plug…Angle charging and Schrader type access valves are available from your Sporlan
Wholesaler.
Type numbers with P suffix indicates female threaded pipe connections.
AMMONIA CATCH-ALL FILTERS prolong the life of ammonia systems by using the Catch-All to effectively remove
scale and other solid contaminants. Select a model from those listed above with female pipe connections.
NOTE: Do not use RPE-48-BD and RPE-100 Filter Elements on Ammonia Systems.
680
FILTER DRIERS
SPORLAN CATCH-ALL FILTER DRIERS
LIQUID LINE RATINGS AND SELECTION RECOMMENDATIONS
Refrigerants R-12, R-22, R-134a, R-404A, R-502, R-507
SELECTION RECOMMENDATIONS
RATINGS AT ARI STANDARD CONDITIONS21
SURFACE FILTERING
(Tons)
AREA (sq ft)22
20Based 22The filtration area is equal to the core surface area plus the large internal surface available for
on 86° F Liquid Temperature and a Refrigerant Flow of 4.0 pounds per minute per ton
of Refrigerant 12; 3.1 pounds per minute per ton of Refrigerant 134a; 2.9 pounds per minute depth filtration.
per ton for Refrigerant 22; 3.9 pounds per minute per ton for Refrigerant 404A; 4.4 pounds NOTE: The variation in flow ratings of filter driers having the same size core and shell is caused
per minute per ton for Refrigerant 502; and 4.1 pounds per minute per ton for Refrigerant 507. by the difference in connection sizes used. For complete capacity and selection information see
Ratings in accordance to ARI Standard 710. your Sporlan Wholesaler or write Sporlan Valve Company for Bulletin 40-10.
2120 drops = 1 gram = 1 cc. *As of this printing, ARI has not established an EPD for R-134a, R-404A and R-507.
681
FILTER DRIERS
SPORLAN CATCH-ALL CW SERIES
NEW REFRIGERANTS,NEW OILS,NEW CHALLENGES
Specially designed to be effective with today’s new refrigerants, the CW
Series averages twice the moisture capacity of a standard Catch-All
Filter Drier and provides the proven contaminant removal qualities you
expect from Sporlan.
MOISTURE
New refrigerants and synthetic oils have forced users to re-evaluate the
P4164
way in which they protect systems. The synthetic polyolester oils, also
known as POE oils, have hydroscopic tendencies that readily attract
and absorb moisture.
The CW Series is compatible with the traditional refrigerants, R-12,
R-22 and R-502, and can be used for severe moisture problems.
ACID REMOVAL AND OIL CLEANUP
With the CW Series, you get a filter drier that not only adsorbs and
holds moisture, but also handles acid and oil cleanup.
FILTRATION
The design and strength of the CW core has not been compromised.
The desiccant composition produces a filter of the same quality stan-
dards expected from Sporlan.
A CORE TO MEET EVERY NEED
P4165
Sporlan’s standard Catch-All core remains unsurpassed in its acid
removal and oil cleanup ability.
A SPECIALIZED SOLUTION
Specially designed for new refrigerants and oils, the CW Series core
also fully meets compressor manufacturers’ stated requirements for
alumina content.
682
FILTER DRIERS
SPORLAN CATCH-ALL CW SERIES
LIQUID LINE RATINGS AND SELECTION RECOMMENDATIONS
Refrigerants R-12, R-22, R134a, R-404A, R-407C, R-507
SURFACE FILTERING
75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F 22 134a 404A/507 502 22 134a 404A/507 22 & 407C 134a
SEALED TYPE
CW-032
CW-032-CAP
CW-032-S 2.1 2.1 1.5 2.0
CW-032-F 9 59 48 64 57 70 47 52 34 1/4 1/4 1/4 1/2 1/2
CW-032-FM
CW-033 4.9 5.0 3.7 4.7
CW-033-S 5.4 5.5 4.0 5.1
CW-052
2.9 3.0 2.2 2.8 3/4 3/4
CW-052S
CW-0525-S 15 122 102 134 118 145 98 108 70 4.1 4.1 2.8 4.2 1/3 1/3 1/3 1-1/2
CW-053 6.0 6.1 4.4 5.6 1
2
CW-053-S 6.7 6.9 5.0 6.4
CW-082
2.9 3.0 2.2 2.8 1/2 1/2 1/2 1 3/4
CW-082-S
CW-0825-S 4.3 4.3 3.1 4.4 3/4 3/4 3/4 1-1/2 1-1/2
CW-083 21 203 169 222 196 241 163 179 116 6.3 6.5 4.8 6.0
1 1 1 2 2
CW-083-S 7.4 7.6 5.6 7.0
CW-084 12.1 12.1 8.3 11.8
1-1/2 1-1/2 1 2 2
CW-084-S 13.4 13.7 10.1 12.7
CW-162 2.9 3.0 2.2 2.8
1-1/2 1 3/4 1-1/2 1
CW-1625-S 4.3 4.3 3.1 4.4
CW-163 6.3 6.5 4.8 6.0
2 2 2 3 3
CW-163-S 7.4 7.6 5.6 7.0
33 305 255 335 295 363 245 270 175
CW-164 14.0 14.3 10.6 13.3
3 2 2 5 3
CW-164-S 15.4 15.7 11.6 14.6
CW-165 19.1 19.5 14.4 18.2
3 2 2 5 5
CW-165-S 21.8 22.3 16.5 20.8
CW-303 6.5 6.6 4.8 6.1 3 3 2 4 3
CW-304 14.0 14.3 10.6 13.3
5 3 3 7-1/2 5
CW-304-S 15.4 15.7 11.6 14.6
53 669 559 734 647 795 537 592 384
CW-305 20.6 21.0 15.5 19.6
5 4 5 7-1/2 7-1/2
CW-305-S 23.4 23.9 17.6 22.2
CW-307-S 30.1 30.7 22.7 28.6 5 5 5 10 7-1/2
CW-414 16.1 16.5 12.1 15.3
5 5 5 7-1/2 5
CW-414-S 17.5 17.9 13.1 16.6
CW-415 21.9 22.4 16.5 20.8
67 854 714 938 826 1015 686 756 490 7-1/2 7-1/2 7-1/2 10 7-1/2
CW-415-S 24.0 24.5 18.2 22.9
CW-417-S 30.7 31.3 23.1 29.2 10 7-1/2 10 10
10
CW-419-S 33.5 34.2 25.3 31.9 12 10 15 12
CW-607-S 39.7 40.5 30.0 37.8
106 1338 1118 1468 1294 1590 1074 1184 768 15 15 10 20 15
CW-609-S 34.6 45.7 34.0 29.1
REPLACEABLE CORE TYPE WITH STANDARD CORES
C-R424 16.0 14.9 12.0 15.0 5 3 5 5 5
C-R425 67 854 714 938 826 1015 686 756 490 20.0 18.3 15.0 19.0
7-1/2 5 5 10 7-1/2
C-R427 25.0 23.6 19.0 24.0
C-485 20.0 18.4 15.0 19.0 10 7-1/2 7-1/2 10 7-1/2
C-487 64 988 826 1085 956 1175 794 875 567 33.0 30.7 25.0 31.0 10 15 12
15 12
C-489-G 60.0 55.5 45.0 57.0 10 20 15
C-967 54.0 50.4 41.0 51.0 25 20 15 25 20
128 1976 1652 2170 1912 2350 1588 1750 1134
C-969 67.0 62.5 50.0 64.0 35 25 25 35 25
C-1449 81.0 75.4 61.0 77.0 40 30 30 40 30
192 2964 2478 3255 2868 3525 2382 2625 1701
C-14411 93.0 86.4 70.0 88.0 50 40 35 50 40
C-19211 118 110 89.0 112 70 50 50 70 50
C-19213 256 3952 3304 4340 3824 4700 3176 3500 2268 136 127 103 130 80 60 55 80 60
C-19217-G 143 134 108 136 85 65 60 85 65
C-30013 294 6295 5263 6915 6090 7482 5058 5573 3612 155 145 117 147 100 75 70 100 75
C-40017 392 8394 7018 9220 8120 9976 6744 7430 4816 200 186 150 190 130 110 100 130 110
20Based 22
on 86° F Liquid Temperature and a Refrigerant Flow of 3.1 pounds per minute per ton The filtration area is equal to the core surface area plus the large internal surface available for
of Refrigerant 134a; 2.9 pounds per minute per ton of Refrigerant 22; 3.9 pounds per minute depth filtration.
per ton for Refrigerant 404A; 2.9 pounds per minute per ton for Refrigerant 407C; 4.1 pounds NOTE: The variation in flow ratings of filter driers having the same size core and shell is caused
per minute per ton for Refrigerant 507. Ratings in accordance to ARI Standard 710. by the difference in connection sizes used. For complete capacity and selection information see
21 your Sporlan Wholesaler or write Sporlan Valve Company for Bulletin 40-10.
20 drops = 1 gram = 1 cc.
*As of this printing, ARI has not established an EPD for R-134a, R-404A, R-407C and R-507.
683
FILTER DRIERS
SPORLAN CATCH-ALL SUCTION LINE FILTER DRIER RECOMMENDATIONS
FOR CLEAN-UP AFTER BURNOUT AND NEW SYSTEMS
SYSTEM CAPACITY IN HORSEPOWER
Refrigerant
Refrigerant 22 & 407C
12, 134a, 404A, 502 & 507
SOLDER
CONNECTIONS NUMBER CORE Temporary Temporary
LENGTH SOCKET WIDTH
TYPE NUMBER (in.) OF PART Installation Installation
(in.) DEPTH (in.) Permanent Permanent
ODF Solder CORES NUMBER Cores for Cores for
(in.) Installation Installation
Cleanup; Cleanup;
with Cores with cores
Filter Elements Filter Elements
after Cleanup after Cleanup
C-084-S-T-HH 1/2 5.44 0.50 2.62 1 1/2
C-164-S-T-HH 1/2 6.00 0.50
C-165-S-T-HH 5/8 6.31 0.62 2 1
3.00
C-166-S-T-HH 3/4 6.75 0.62
C-167-S-T-HH 7/8 6.93 0.75
C-305-S-T-HH 5/8 9.25 0.62 3
2
SEALED TYPE
C-30017-G 2-1/8 25 50 15 25
CORE TYPE
684
FILTER DRIERS
SPORLAN CATCH-ALL SUCTION LINE FILTER DRIER RECOMMENDATIONS
SIGNIFICANCE OF THE TYPE NUMBER
The letters and numerals in the Catch-All type number each have a Other suffix letters indicate special qualities. For example:
significance. The “C” indicates Catch-All, and “CW” indicates the “-T” indicates a pressure tap consisting of a Schrader type
High Water Capacity Catch-All. The FIRST TWO OR THREE DIGITS access valve on the inlet end of the Catch-All.
indicate cubic inches of desiccant. The LAST ONE OR TWO DIGITS
indicate fitting size in eighths. For sealed models, a “-S” following the “-HH” indicates a charcoal style core for wax removal and cleanup
last digit indicates solder fittings, and NO LETTER indicates a flare after a hermetic motor burnout.
fitting. Replaceable core models (C-420 and larger) only have solder “-F” indicates a female flare outlet fitting with a male flare inlet
connections and the “-S” is omitted. Examples are: C-083 is 8 cu. in. fitting.
and 3/89 flare, C-309-S is 30 cu. in. and 1-1/89 solder, C-19213 is “-FM” indicates a female flare inlet fitting with a male flare outlet
192 cu. in. and 1-5/89 solder. fitting.
“-CAP” indicates a Catch-All particularly designed for installation
on capillary tube systems.
685
FILTER DRIERS
PARKER STEEL LIQUID LINE FILTER DRYERS (LLD Series)
Key Features and Benefits
• High moisture and acid capacity. Maximum filtration capacity.
• Exceptional compatibility with new polyolester oils.
• Compatible with all existing and new refrigerants and blends
including 134a, 401A/B, 402A/B, 404A, 407A/B/C, 410A,
502, 507A.
• Spring loaded 100% molecular sieve. For 410A, Parker rec-
ommends XH11 (consult Parker). P4112
• Solid copper sweat fittings. • Extended copper ends available (select models).
• Powder paint exterior coating surpasses 500 hour ASTM salt • Available with other desiccant combinations including char-
spray test and resists corrosion. coal and activated alumina (consult Parker).
• Eliminates concern of additive stripping. • Various inlet/outlet fitting combinations available.
• 032 MF liquid line dryer features 1/4″ SAE steel flare male • U.L. listed SA3441, CSA certified LR46423.
inlet and 1/4″ SAE steel female flare outlet. Consult Parker
for other sizes. NOTE: For R-410A applications, Parker recommends XH11
desiccant. See pages 9-11 for R-410A dryer
• 500 psig design pressure (600 psig available on all models information.
designed for R-410A applications with XH11 desiccant.
*See Parker RAC-1 catalog pages 9-11 for R-410A specific dryers and applications.
686
FILTER DRIERS
PARKER STEEL LIQUID LINE FILTER DRYERS (LLD Series)
Steel Liquid Line Dryer Dimensions
P4113
687
FILTER DRIERS
PARKER STEEL LIQUID LINE FILTER DRYERS (LLD Series)
Steel Liquid Line Dryers Flow Capacity
(tons of refrigerant) at pressure drop 1 psi
Model Filter
Part No. R-12 R-22 R-134a R-401A R-401B R-401C R-402A R-402B R-404A R-407A R-407B R-407C R-410A* R-502 R-507A
No. Area
033000-032 032 1.27 1.70 1.54 1.74 1.75 1.55 1.14 1.34 1.10 1.48 1.19 1.64 1.67 1.11 1.10
033000-0329 032S 10 1.41 1.84 1.72 1.93 1.95 1.72 1.27 1.48 1.22 1.65 1.32 1.82 1.86 1.23 1.23
032MF 1.27 1.70 1.54 1.74 1.75 1.55 1.14 1.34 1.10 1.48 1.19 1.64 1.67 1.11 1.10
033000-052 052 1.41 1.84 1.72 1.93 1.95 1.72 1.27 1.48 1.22 1.65 1.32 1.82 1.86 1.23 1.23
033000-0529 052S 1.48 2.05 1.80 2.03 2.04 1.80 1.34 1.56 1.29 1.73 1.39 1.91 1.95 1.29 1.29
033000-0525 0525S 17 2.47 3.32 3.00 3.38 3.40 3.01 2.23 2.60 2.14 2.88 2.31 3.19 3.25 2.15 2.15
033000-053 053 2.97 3.96 3.60 4.06 4.08 3.61 2.67 3.12 2.57 3.46 2.78 3.83 3.90 2.58 2.57
033000-0539 053S 3.54 4.74 4.29 4.83 4.86 4.30 3.18 3.71 3.06 4.12 3.31 4.56 4.64 3.07 3.06
033000-082 082 1.41 1.84 1.72 1.93 1.95 1.72 1.27 1.48 1.22 1.65 1.32 1.82 1.86 1.23 1.23
033000-0829 082S 1.56 2.12 1.89 2.13 2.14 1.89 1.40 1.63 1.35 1.81 1.46 2.01 2.04 1.35 1.35
033000-0825 0825S 2.62 3.46 3.17 3.58 3.60 3.18 2.35 2.74 2.27 3.05 2.45 3.37 3.43 2.27 2.27
033000-083 083 27 3.32 4.45 4.03 4.54 4.57 4.04 2.99 3.49 2.88 3.87 3.11 4.28 4.36 2.89 2.88
033000-0839 083S 3.75 5.02 4.54 5.12 5.15 4.55 3.37 3.93 3.25 4.37 3.51 4.83 4.92 3.26 3.25
033000-084 084 5.30 7.14 6.43 7.25 7.29 6.44 4.77 5.56 4.59 6.18 4.96 6.84 6.96 4.61 4.60
033000-0849 084S 5.37 7.21 6.52 7.35 7.39 6.53 4.83 5.64 4.65 6.26 5.03 6.93 7.05 4.67 4.66
033000-162 162 1.63 2.19 1.97 2.22 2.24 1.98 1.46 1.71 1.41 1.89 1.52 2.10 2.13 1.41 1.41
033000-1629 162S 1.77 2.40 2.14 2.42 2.43 2.15 1.59 1.85 1.53 2.06 1.65 2.28 2.32 1.54 1.53
033000-1625 1625S 3.04 4.03 3.69 4.16 4.18 3.69 2.74 3.19 2.63 3.54 2.84 3.92 3.99 2.64 2.64
033000-163 163 3.96 5.30 4.80 5.41 5.45 4.81 3.56 4.15 3.43 4.61 3.70 5.10 5.20 3.44 3.43
033000-1639 163S 4.38 5.94 5.32 5.99 6.03 5.33 3.94 4.60 3.80 5.11 4.10 5.65 5.75 3.81 3.80
033070-1639 163S (R-410A) 34
033000-164 164 6.72 9.05 8.15 9.18 9.24 8.16 6.04 7.05 5.82 7.83 6.28 8.66 8.81 5.84 5.82
033000-1649 164S 7.28 9.83 8.83 9.96 10.02 8.85 6.55 7.64 6.31 8.49 6.81 9.39 9.56 6.33 6.31
033000-165 165 9.40 12.58 11.40 12.86 12.94 11.43 8.46 9.87 8.15 10.96 8.80 12.12 12.34 8.17 8.15
033000-1659 165S 9.69 13.01 11.75 13.24 13.32 11.77 8.71 10.16 8.39 11.29 9.06 12.49 12.71 8.42 8.40
166 11.03 14.78 13.38 15.08 15.17 13.40 9.92 11.57 9.55 12.85 10.32 14.22 14.47 9.59 9.56
033000-303 303 4.03 5.44 4.89 5.51 5.54 4.90 3.63 4.23 3.49 4.70 3.77 5.19 5.29 3.50 3.49
033000-3039 303S 4.60 6.15 5.57 6.28 6.32 5.59 4.13 4.82 3.98 5.35 4.30 5.92 6.03 3.99 3.98
033070-3039 303S (R-410A)
033000-304 304 7.99 10.75 9.69 10.92 10.99 9.71 7.19 8.38 6.92 9.31 7.47 10.30 10.48 6.94 6.93
033000-3049 304S 61 9.26 12.44 11.23 12.66 12.74 11.26 8.33 9.72 8.02 10.79 8.66 11.94 12.15 8.05 8.03
033000-305 305 10.96 14.71 13.29 14.98 15.07 13.32 9.86 11.50 9.49 12.77 10.25 14.13 14.38 9.52 9.50
033000-3059 305S 12.09 16.26 14.66 16.53 16.63 14.69 10.88 12.69 10.47 14.09 11.31 15.58 15.86 10.51 10.48
306 12.30 16.47 14.92 16.82 16.92 14.95 11.07 12.91 10.66 14.33 11.51 15.86 16.14 10.69 10.67
033000-3079 307S 14.99 20.15 18.18 20.49 20.62 18.22 13.48 15.73 12.98 17.46 14.02 19.32 19.67 13.03 13.00
033000-413 413 4.03 5.44 4.89 5.51 5.54 4.90 3.63 4.23 3.49 4.70 3.77 5.19 5.29 3.50 3.49
033000-414 414 8.06 10.82 9.78 11.02 11.09 9.80 7.25 8.46 6.98 9.39 7.54 10.39 10.58 7.01 6.99
033000-4149 414S 9.26 12.44 11.23 12.66 12.74 11.26 8.33 9.72 8.02 10.79 8.66 11.94 12.15 8.05 8.03
80
033000-415 415 10.96 14.71 13.29 14.98 15.07 13.32 9.86 11.50 9.49 12.77 10.25 14.13 14.38 9.52 9.50
033000-4159 415S 12.09 16.26 14.66 16.53 16.63 14.69 10.88 12.69 10.47 14.09 11.31 15.58 15.86 10.51 10.48
033000-4179 417S 17.18 23.12 20.84 23.49 23.63 20.88 15.46 18.03 14.88 20.02 16.07 22.15 22.54 14.93 14.90
033000-7569 756S 14.63 19.65 17.75 20.01 20.13 17.79 13.17 15.36 12.68 17.05 13.69 18.87 19.20 12.72 12.69
033000-7579 757S 131 18.17 24.32 22.04 24.84 24.99 22.08 16.35 19.07 15.74 21.17 17.00 23.42 23.84 15.79 15.75
033000-7599 759S 20.01 26.80 24.27 27.36 27.52 24.32 18.00 20.99 17.33 23.31 18.72 25.79 26.26 17.39 17.35
*Specific models have been designed for use with R-410A. See Parker Catalog RAC-1 pages 9-11 for R-410A specific dryers and applications.
688
FILTER DRIERS
PARKER BI-FLOW FILTER DRYERS — BF SERIES
Bi-Flow Filter Dryers - BF Series
The “BF” Series bi-flow dryer is designed specifically for heat pump or
reverse cycle application. External check valves are not required since
they are incorporated within the filter dryer shell. The core design filters
out contaminant particles down to 25 microns.
Refrigerant Holding Capacities for Bi-Flow Dryers (in oz. of refrigerant @ 100° F)
Model
R-12 R-22 R-134a R-401A R-401B R-401C R-402A R-402B R-404A R-407A R-407B R-407C R-410A R-502 R-507A
Series
BF080 8.17 7.39 7.48 7.27 7.27 6.39 6.74 6.87 6.34 6.97 7.07 6.98 6.44 7.46 6.34
BF160 9.54 8.63 8.74 8.49 8.49 7.47 7.87 8.03 7.40 8.14 8.26 8.16 7.52 8.72 7.41
BF160-XF* 15.47 13.99 14.16 13.77 13.77 12.11 12.76 13.02 12.00 13.20 13.39 13.22 12.19 14.15 12.01
689
FILTER DRIERS
PARKER BI-FLOW FILTER DRYERS — BF SERIES
Bi-Flow Dryer Flow Capacity — Tons of Refrigerant at Pressure Drop 1 psi
Filter Area
Part No. Model R-12 R-22 R-134a R-401A R-401B R-401C R-402A R-402B R-404A R-407A R-407B R-407C R-410A R-502 R-507A
(cu in.)
031653-01 BF082S 1.6 2.1 1.9 2.2 2.2 1.9 1.4 1.7 1.4 1.9 1.5 2.0 2.1 1.4 1.4
031653-02 BF083S 2.1 2.8 2.6 2.9 2.9 2.6 1.9 2.2 1.8 2.5 2.0 2.7 2.8 1.8 1.8
031653-03 BF084S 10.4 2.7 3.5 3.2 3.6 3.6 3.2 2.4 2.8 2.3 3.1 2.5 3.4 3.5 2.3 2.3
031653-04 BF083 2.1 2.8 2.6 2.9 2.9 2.6 1.9 2.2 1.8 2.5 2.0 2.7 2.8 1.8 1.8
031653-09 BF084 2.7 3.5 3.2 3.6 3.6 3.2 2.4 2.8 2.3 3.1 2.5 3.4 3.5 2.3 2.3
031653-05 BF162S 1.6 2.1 1.9 2.2 2.2 1.9 1.4 1.7 1.4 1.9 1.5 2.0 2.1 1.4 1.4
031653-06 BF163S 2.2 2.9 2.6 3.0 3.0 2.6 2.0 2.3 1.9 2.5 2.0 2.8 2.9 1.9 1.9
031653-07 BF164S 2.7 3.5 3.2 3.6 3.6 3.2 2.4 2.8 2.3 3.1 2.5 3.4 3.5 2.3 2.3
031653-11 BF165S 14.4 3.7 4.9 4.5 5.1 5.1 4.5 3.3 3.9 3.2 4.3 3.5 4.8 4.9 3.2 3.2
BF163 2.1 2.8 2.6 2.9 2.9 2.6 1.9 2.2 1.8 2.5 2.0 2.7 2.8 1.8 1.8
BF164 2.7 3.5 3.2 3.6 3.6 3.2 2.4 2.8 2.3 3.1 2.5 3.4 3.5 2.3 2.3
BF163S-XF 2.7 3.6 3.3 3.7 3.7 3.3 2.4 2.8 2.3 3.1 2.5 3.5 3.5 2.3 2.3
Refrigerant Internal Holding Capacities for Copper Bi-flow Dryers (in oz. of refrigerant @ 100° F)
Part No.
R-12 R-22 R-134a R-401A/B R-401C R-402A R-402B R-404A R-407A R-407B R-407C R-410A R-502 R-507A
Series
032284-050 7.16 6.47 6.55 6.37 5.60 5.90 6.02 5.55 6.11 6.20 6.12 5.64 6.54 5.56
032284-080 9.05 8.18 8.28 8.05 7.08 7.46 7.61 7.02 7.72 7.83 7.73 7.13 8.27 7.03
032284-160 11.15 10.08 10.21 9.92 8.73 9.19 9.38 8.65 9.52 9.65 9.53 8.79 10.18 8.66
690
FILTER DRIERS
PARKER COPPER SUCTION LINE DRYER (Cu SLD Series)
• High-acid solid core design.
• Flow capacities from 1/6 through 2-1/2 tons.
• Access valve to check system pressure or charge through.
• Applications include refrigerators, freezers, ductless A/C and PTAC units.
NOTE: Model Cu SLD 5/16 is 100% XH6 molecular sieve. Models Cu SLD-3S & 4S
are 50% molecular sieve and 50% activated alumina.
Copper Suction Line Dryer Data P4118
Maximum Flow Rate System
Cutout
404A O.A.
Part No. Description 22 Length
134a 401A/B 502, 407A/B 410A Length
402 (in.)
507 (in.)
CuSLD 5/16 Copper Solid Core Suction Line Dryer 1/3 1/4 1/4 1/3 1/3 1/2 5.31 4.63
032104-00 CuSLD-3S Copper Solid Core Suction Line Dryer 2-1/2 2 2 2 2-1/2 2-1/2 6.71 6.00
032104-01 CuSLD-4S Copper Solid Core Suction Line Dryer 2-1/2 2 2 1-1/2 2-1/2 2-1/2 6.71 6.00
691
FILTER DRIERS
PARKER STEEL SUCTION LINE FILTER DRYERS — “The Original SLD”
Steel Suction Line Dryer Dimensions
B
A Shell
System Cutout
Part No. Description Overall Length Diameter
Length
(in.) (in.)
(in.)
031593-01 SLD 8-3VHH Steel Suction Line Filter Dryer 5.13 — 3
031593-03 SLD 8-3SVHH Steel Suction Line Filter Dryer 4.31 3.13 3
031593-02 SLD 8-4VHH Steel Suction Line Filter Dryer 5.38 — 3
031593-04 SLD 8-4SVHH Steel Suction Line Filter Dryer 4.44 3.13 3
031593-05 SLD 8-5SVHH Steel Suction Line Filter Dryer 4.66 3.16 3
031593-14 SLD 8-6SVHH Steel Suction Line Filter Dryer 4.72 3.16 3
031593-09 SLD 13-5VHH Steel Suction Line Filter Dryer 5.82 — 4
031593-06 SLD 13-5SVHH Steel Suction Line Filter Dryer 4.91 3.45 4
031593-07 SLD 13-6SVHH Steel Suction Line Filter Dryer 4.97 3.45 4
031593-08 SLD 13-7SVHH Steel Suction Line Filter Dryer 4.97 3.47 4
031593-15 SLD 13-9SVHH Steel Suction Line Filter Dryer 5.72 3.47 4
031593-10 SLD 27-7SVHH Steel Suction Line Filter Dryer 6.97 5.47 4
P4120
031593-11 SLD 27-9SVHH Steel Suction Line Filter Dryer 7.72 5.36 4
031593-12 SLD 54-11SVHH Steel Suction Line Filter Dryer 12 9.17 4
031593-13 SLD 54-13SVHH Steel Suction Line Filter Dryer 12 9.17 4
692
FILTER DRIERS
PARKER STEEL SUCTION LINE FILTER DRYERS — “The Original SLD”
Steel Suction Line Filter Dryer Ratings and Capacities
Refrigerant R-22 R-134a R-404A R-407A & R-407C
Evaporator Temp 40° F 20° F 0° F -20° F -40° F 40° F 20° F 0° F -20° F 40° F 20° F 0° F -20° F -40° F 40° F 20° F 0° F -20° F -40° F
Pressure Drop PSI 3 2 1.5 1 0.5 2.0 1.5 1.0 0.5 3.0 2.0 1.5 1.0 0.5 3.0 2.0 1.5 1.0 0.5
SLD 8-3V-HH 1.1 0.8 0.6 0.4 0.2 0.7 0.6 0.5 0.4 1.0 0.7 0.5 0.3 0.3 1.1 0.8 0.6 0.4 0.2
SLD 8-3SV-HH 1.2 0.9 0.7 0.5 0.3 0.8 0.7 0.6 0.5 1.0 0.8 0.6 0.4 0.5 1.2 0.9 0.7 0.5 0.3
SLD 8-4V-HH 2.3 1.6 1.1 0.7 0.4 1.5 1.2 0.9 0.7 2.0 1.4 0.9 0.6 0.6 2.2 1.6 1.1 0.7 0.4
SLD 8-4SV-HH 2.6 1.8 1.2 0.8 0.5 1.7 1.4 1.0 0.8 2.3 1.5 1.0 0.6 0.8 2.5 1.8 1.2 0.8 0.5
SLD 8-5SV-HH 3.9 2.6 1.8 1.2 0.6 2.5 2.0 1.5 1.1 3.4 2.2 1.5 1.0 1.0 3.8 2.6 1.8 1.2 0.6
SLD 8-6SV-HH 4.2 2.8 1.9 1.3 0.6 2.7 2.1 1.6 1.2 3.6 2.4 1.6 1.0 1.0 4.1 2.8 1.9 1.3 0.6
SLD 13-5V-HH 4.1 2.7 2.0 1.3 0.8 2.6 2.0 1.7 1.2 3.6 2.3 1.6 1.0 1.3 4.0 2.7 2.0 1.3 0.8
SLD 13-5SV-HH 5.0 3.0 2.5 1.5 1.0 3.2 2.3 2.1 1.4 4.3 2.5 2.1 1.2 1.6 4.9 3.0 2.5 1.5 1.0
SLD 13-6SV-HH 7.0 4.5 3.0 2.0 1.0 4.5 3.4 2.5 1.9 6.1 3.8 2.5 1.6 1.6 6.8 4.5 3.0 2.0 1.0
SLD 13-7SV-HH 7.0 4.5 3.0 2.0 1.0 4.5 3.4 2.5 1.9 6.1 3.8 2.5 1.6 1.6 6.8 4.5 3.0 2.0 1.0
SLD 13-9SV-HH 7.2 4.6 3.1 2.1 1.0 4.6 3.5 2.6 2.0 6.3 3.9 2.5 1.7 1.6 7.0 4.6 3.1 2.1 1.0
SLD 27-7SV-HH 10.0 8.0 5.0 3.0 2.0 6.4 6.0 4.2 2.9 8.7 6.8 4.1 2.4 3.2 9.7 7.9 5.0 3.1 2.1
SLD 27-9SV-HH 13.0 9.0 6.0 4.0 2.0 8.3 6.8 5.1 3.8 11.3 7.6 4.9 3.2 3.2 12.7 8.3 6.0 4.1 2.1
SLD 54-11SV-HH 20.0 13.5 9.5 6.5 3.5 12.8 10.2 8.0 6.2 17.4 11.4 7.8 5.2 5.7 19.5 13.4 9.5 6.6 3.6
SLD 54-13SV-HH 23.0 16.0 11.0 7.0 4.0 14.7 12.1 9.3 6.7 20.0 13.5 9.0 5.6 6.5 22.4 15.8 11.1 7.1 4.1
693
FILTER DRIERS
PARKER REPLACEMENT DRYER SHELLS AND FILTER CORES
Parker replacement filter cores and dryer shells are designed to provide flexibility
over a wide range of applications. All models are designed for use in both the
liquid and suction line of refrigeration or air conditioning systems. In single or
multiple-core applications, cores may be loaded individually for ease of installa-
tion in tight spots. A wide range of fittings for suction-line applications and inter-
changeable laying-in dimensions with other manufactured models increase
product versatility.
A new design of the internal assembly provides the advantage of using the
Parker PFE-48BF filter element, which removes solid contaminants such as cop-
per oxides, chips and other metal fines. The new design is also suited for using
Parker dryer cores such as the Z-48 or the PCK-48HH, which provides removal
of moisture, acid, wax and oil/flux paste.
Key Features and Benefits
P4121
• Solid copper full flow fittings – 5/8″ to 3-1/8″.
• Powder paint exterior coating surpasses 500 hour ASTM salt spray tests and resists corrosion.
• Aluminum end plates and stainless steel bolts resist corrosion.
• For suction application: removable screen.
• U.L. listed file no. SA3441, CSA certified LR46423.
• Working pressure: 500 psi.
• All welded construction.
694
FILTER DRIERS
PARKER FILTERS AND PRE-FILTERS
Parker provides a large selection of components for recovery, recycle and reclaim machines, protecting them from the many types of
contaminants that are encountered during the servicing of systems.
PF Series
The PF 052 & PF 052MF are designed to provide a filtration level of
15 microns. When installed on the inlet of your machine it can prevent
costly damage by filtering solid contaminants out of the refrigerant
before it enters your machine. The Parker pre-filter is for temporary
use only and should be changed after servicing a maximum of six to
eight systems. Change out may be needed sooner depending on
actual system conditions. Various fitting combinations are available.
Key Features and Benefits
• Female outlet fitting allows direct mounting to the machine.
P4122
• Extended female end fitting provides valve handle clearance.
• Male-to-male fittings allow connection to or between hoses.
• Enlarged depth filtering area.
• UL listed/CSA certified.
Model Inlet (in.) Outlet (in.)
PF 052 1/4 SAE male flare 1/4 SAE male flare
SPD Series PF 052MF 1/4 SAE male flare 1/4 SAE female flare
LP Gas Filter
Additives to LP gas can cause scaling and flaking of copper and
aluminum tubing over a period of time. The Parker LP Gas Filter (For LP Gas Filter, consult factory for inlet/outlet data and
effectively removes these contaminants part numbers.)
Key Features and Benefits
• Special paint meets U.L. requirements for gas appliances.
695
FILTER DRIERS
PARKER PRD-3 SERIES
Specifically designed for OEM recovery units that require 3/8″ flare
connections and a larger cross sectional filter area. The PRD-3 filter
dryer meets or exceeds OEM specifications providing both value and
efficiency.
Key Features and Benefits
• High acid and high moisture capacity.
• Enlarged filtration area.
• 3/8″ SAE male flare fittings on both ends.
• Drop in replacement for ASD-28F3 or KH45LD010.
• Compatible with all HCFC, CFC and other refrigerant blends.
P4124
P4126
696
OIL TEST KIT
ALCO ACID ALERT REFRIGERATION OIL TEST KIT
How to Test Oil with the Acid Alert
1. Pour the solution from the small bottle into the large bottle. The
bottom layer of this mixture will be purple.
2. Completely fill the small bottle with oil from the unit being
tested. Do this immediately after the oil is removed from the
crankcase, since exposure to air will contaminate the oil and
result in a false test result.
3. Pour the oil into the large bottle and shake vigorously.
4. Wait two to three minutes. A phase separation will develop as
the oil rises to the top of the mixture and an aqueous layer
forms on the bottom. P1400
697
OIL TEST KIT
Satisfactory for Use with the Acid Alert 3. Pour the refrigerant into the large bottle and shake well.
Nu-Calgon Wholesaler, Inc. C-3 Calumet 4. Immediately after shaking, loosen cap carefully to relieve
Nu-Calgon Wholesaler, Inc. C-4 Calumet pressure. Wait two or three minutes. When testing R-113, a
Zerol® 150 Chevron normal phase separation will develop as the refrigerant rises to
Zerol 200TD Calumet the top of the mixture and the aqueous (color-indicating) layer
Zerol® 300 Chevron forms on the bottom. When testing R-11, the color-indicating
Suniso 3GS Witco layer will form on the top.
Suniso 4GS Witco
Witco 5. If the color-indicating layer:
Texaco WF-32
Texaco WF-68 Witco Stays purple — the refrigerant is satisfactory
Turns light pink to clear — the refrigerant is contaminated
Unsatisfactory for Use with the Acid Alert
If contamination is indicated, necessary steps should be taken to
Delvac 1120 Mobil Oil Company free the system from contamination. Consult the equipment main-
DTE Heavy Medium Mobil Oil Company tenance manual for specific instructions.
American Industrial 31 Standard Oil (Indiana) Co.
Ursa HD20 Texaco Ordering Instructions
Regal PC Texaco
WS-5124 Exxon Company
To order, specify:
WS-4672 Exxon Company 1. Catalog Number
Teresso No. 52 Exxon Company
Rimula 54802 Shell Oil Company 2. Quantity
Tellus 33 Shell Oil Company
NOTE: Products, specifications, and data in this literature are sub-
Sunvis 620 Sun Oil Company
Sunvis 931 Sun Oil Company
ject to change without notice. Questions regarding product selec-
Polyester Lubricants All Manufacturers tion for specific applications should be directed to Alco Technical
Service Department, Alco Controls, St. Louis, Missouri.
Testing R-11 and R-113 Refrigerant
Most of the inhibited oils which cannot be tested with the Acid
Alert Test Kit are used in centrifugal systems. However, the Acid
Engineering has advised that the Acid Alert Kit may not be
Alert Test Kit can be used to check for excessive acidity in centrif-
reliable when used with some of the oil additive leak
ugal systems using R-11 or R-113 Refrigerant, even if oil in the detectors.
systems cannot be checked.
The following procedure should be followed when testing R-11 or Engineering recommends that the Acid Alert Kit not be used
on systems which have used an oil additive leak detector.
R-113 Refrigerant:
These additives have produced inconsistent and/or reliable
1. Pour the solution from the small bottle into the large bottle. The results.
bottom layer of this mixture will be purple.
2. Completely fill the small bottle with refrigerant from the unit
being tested. Do this immediately after the refrigerant is
removed from the compressor since exposure to air will
contaminate the sample and give a false test result.
P/N DESCRIPTION
AA/ALERT KT Acid Alert Kit
AA KIT POE Alert Kit for POW
698