Professional Documents
Culture Documents
Installation Directions For The Presser Foot (Compact)
Installation Directions For The Presser Foot (Compact)
Part #: 05024BM-CT01
Tools Needed.
Remove the 2.0mm set screws and get the Thread Guide (M) off the Needle Case Cover.
Remove the Needle Case Cover.
Remove Flat head screws from the THREAD GUIDE (L) and remove the Thread Guide (L).
Fig 2 Fig 3
1-Remove the small Flat head screw from the NEEDLE FIXED HOLDER (Fig 1) and remove the Needle
Fixed Holder and the Presser Foot Cushion Rubber"A. (Fig 1)
2-Remove the Black flat head screw from the PRESSER FOOT (Fig 2) and remove the Presser foot (Fig 3).
1-Mount the new Presser foot and insert the Flat head black Screw but “DO NOT TIGHTEN THE SCREW”
just snug it a bit. (Fig 4)
2-Place the Presser foot Cushion rubber A in the Needle Bar. (Fig 5)
3-Insert the Needle Fixed Holder in the Needle bar under the Presser Foot Cushion Rubber “A” and
insert the Screw but “DO NOT TIGHTEN THE SCREW”. (Fig 6)
4-Insert the Needle in the Needle Bar and tighten the screw. (Fig 7)