Professional Documents
Culture Documents
DRAFT
Title page
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
DRAFT
Use pursuant to applicable agreements
Legal notice
DRAFT
Legal notice
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective
owners.
The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
Copyright © 2013 Alcatel-Lucent. All rights reserved.
Contains proprietary/trade secret information which is the property of Alcatel-Lucent and must not be made available to, or copied or used by anyone outside
Alcatel-Lucent without its written authorization.
Not to be used or disclosed except in accordance with applicable agreements.
DRAFT
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
Contents
DRAFT
About this document
Purpose ............................................................................................................................................................................................. ix
ix
1 Introduction to Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT support)
optional feature
2 Feature Description
Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT support) Optional Feature ............... 2-1
2-1
....................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary iii
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT Contents
....................................................................................................................................................................................................................................
5 Impact on Technician Interface (TI) CLI
6 Feature Implementation
Provisioning appctl form for Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT
support) optional feature ................................................................................................................................................ 6-3
6-3
Provisioning cell3g form for the Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x
RTT support) optional feature ...................................................................................................................................... 6-6
6-6
Provisioning ceqface form for the Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x
RTT support) optional feature ...................................................................................................................................... 6-8
6-8
7 Related Documentation
A Abbreviations
Index
DRAFT
....................................................................................................................................................................................................................................
iv Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
List of tables
DRAFT
3-1 Related RC/V forms ................................................................................................................................................. 3-1
3-1
4-1 Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT support) service
measurements .......................................................................................................................................................... 4-1
4-1
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary v
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT List of tables
....................................................................................................................................................................................................................................
DRAFT
....................................................................................................................................................................................................................................
vi Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
List of figures
DRAFT
6-1 appctl form ................................................................................................................................................................... 6-5
6-5
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary vii
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT List of figures
....................................................................................................................................................................................................................................
DRAFT
....................................................................................................................................................................................................................................
viii Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
DRAFT
About this document
About this document
Purpose
This document describes the Enhanced Circuit Switching Fall Back from LTE to 3G1X
(1x RTT support) optional feature and associated feature functionalities.
Intended Audience
This document is intended for technicians, engineers, and system administrators who
implement or maintain the Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x
RTT support) optional feature in a CDMA2000® network.
Technical support
To obtain technical support, documentation, and training or submit feedback
The Online Customer Support (OLCS) web site (http://support.alcatel-lucent.com/)
provides access to technical support, related documentation, related training, and
feedback tools. The site also provides account registration for new users.
How to comment
To comment on this document, go to the Online Comment Form (http://infodoc.alcatel-
lucent.com/comments/) or e-mail your comments to the Comments Hotline
(comments@alcatel-lucent.com).
DRAFT
...................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary ix
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT About this document
....................................................................................................................................................................................................................................
DRAFT
....................................................................................................................................................................................................................................
x Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
DRAFT
1 I1ntroduction to Enhanced
Circuit Switching Fall Back
from LTE to 3G1X (1x RTT
support) optional feature
Overview
Purpose
This chapter provides an introduction to the Enhanced Circuit Switching Fall Back from
LTE to 3G1X (1x RTT support) optional feature and associated feature functionalities. It
also provides information on their affect on user interfaces, availability, and prerequisites
for implementation.
Feature Identifier
The unique Feature Identifier (FID) assigned to this feature is 39211.3.
Contents
DRAFT
...................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary 1-1
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT Introduction to Enhanced Circuit Switching Fall Back from Feature Summary
LTE to 3G1X (1x RTT support) optional feature
....................................................................................................................................................................................................................................
Feature Summary
Introduction
The Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT support) optional
feature supports an S102 Interface (subset of A21 interface) for the LTE and CDMA
3G1x interworking, as defined in Standards, 3GPP TS 29.277.
Availability
Release Availability
The Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT support) optional
feature is available in Release 40.1and later.
Market Availability
The Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT support) optional
feature is a restricted availability feature.
DRAFT
....................................................................................................................................................................................................................................
1-2 Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
Introduction to Enhanced Circuit Switching Fall Back from Prerequisites
DRAFT
LTE to 3G1X (1x RTT support) optional feature
....................................................................................................................................................................................................................................
Prerequisites
Introduction
The Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT support) optional
feature has the following prerequisites
HLR configuration
The Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT support) optional
feature supports both Standalone Home Location Register (SHLR) and Integrated Home
Location Register (IHLR).
Hardware requirements
Following are some of the hardware requirements for the Enhanced Circuit Switching
Fall Back from LTE to 3G1X (1x RTT support) optional feature:
• Mobiles with a single receiver and single transmitter that support data-over-LTE,
voice-over-3G1x, and 1x SMSs
• MMCv4 UNAC Base Cabinet. Switch port 16 is used for this feature.
Interface requirements
The Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT support) optional
feature requires the A21 service that supports up to 45 A21 interfaces to the MME.
Signaling requirements
The Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT support) optional
feature requires ANSI-41, IS-824, and IS-1149 signaling.
....................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary 1-3
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT Introduction to Enhanced Circuit Switching Fall Back from Prerequisites
LTE to 3G1X (1x RTT support) optional feature
....................................................................................................................................................................................................................................
DRAFT
....................................................................................................................................................................................................................................
1-4 Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
DRAFT
2 Feature Description
2
Overview
Purpose
This chapter provides detailed information on the functionality, benefits, and the
operation of the Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT
support) optional feature and associated feature functionalities.
Contents
Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT support) 2-1
Optional Feature
...................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary 2-1
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT Feature Description Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x
RTT support) Optional Feature
....................................................................................................................................................................................................................................
Functionality
Following are some of the important functions of this feature.
• For mobile originated voice calls, instead of the UE returning to 1x and sending an
Origination over the 1x air interface, the UE will tunnel the Origination message
through RRC, S1, and S102 to the IWS. The MSC then performs a virtual handover,
assigns a traffic channel, and sends a UHDM back to the UE using S102, S1 and
RRC.
• For mobile-terminated voice calls, instead of the UE returning to 1x and sending Page
Response over the 1x air interface, the UE tunnels the Page Response message
through RRC, S1, and S102 to the IWS. The MSC then performs a virtual handover,
assigns a traffic channel, and sends a UHDM back to the UE using S102, S1 and
RRC.
• Coexistence of CSFB and eCSFB is possible. If a response to a tunnelled page is
received over the 1x air interface, CSFB is performed, and if the page response is
received from S102, eCSFB is performed.
The scenarios for LTE-1X CSFB include:
• Registration with 3G-1X
• Mobile Originated Voice Calls
• Mobile Terminated Voice Calls
• Mobile Originated SMS calls
• Mobile Terminated SMS Calls
• S102 tunnel redirection
• e911
• CALEA
• Location Based Services
Network Overview
The following figure depicts the S102 interface between the 3G1x system and the LTE
system that has been defined to carry the signaling messages. The S102 interface is based
on the A21 interface and is a subset of A21 interface. The S102 interface is defined in
3GPP TS 29.277.
The concept can be deployed in areas where both LTE and 3G1X infra-structures overlay
as two independent systems.
DRAFT
....................................................................................................................................................................................................................................
2-2 Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
Feature Description Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x
DRAFT
RTT support) Optional Feature
....................................................................................................................................................................................................................................
A21 service can be defined as the functionality that provides the A21 as well as the S102
interface and the supporting functionality. An A21 service operating in the Alcatel-Lucent
3G1x MSC interfaces with:
· A21 services in one or more Alcatel-Lucent 1xEV-DO RNCs and/or BSR proxies to
provide the A21 interface . Since the A21 interface is a standard interface, the
Alcatel-Lucent A21 service (either in the MSC, RNC, or BSR proxy) will also need to
support an A21 interface to other vendors' equipment (future release).
Performance impact
This feature does not impact the system performance.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary 2-3
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT Feature Description Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x
RTT support) Optional Feature
....................................................................................................................................................................................................................................
DRAFT
....................................................................................................................................................................................................................................
2-4 Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
DRAFT
3 I3mpact on the RC/V
subsystem
Overview
Purpose
This chapter provides detailed information about the impact of the Enhanced Circuit
Switching Fall Back from LTE to 3G1X (1x RTT support) optional feature on the Recent
Change and Verify forms.
Contents
appctl form
DRAFT
The appctl form is used to specify a preferred band class for eCSFB call setup. .
...................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary 3-1
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT Impact on the RC/V subsystem Recent Change and Verify Forms
....................................................................................................................................................................................................................................
The Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT support) optional
feature uses the following fields in the appctl form, as shown in Table 3-2, “Related
fields in the appctl form” (p. 3-2).
....................................................................................................................................................................................................................................
3-2 Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
Impact on the RC/V subsystem Recent Change and Verify Forms
DRAFT
....................................................................................................................................................................................................................................
Table 3-2 Related fields in the appctl form (continued)
cell3g form
The cell3g form is used to specify whether LTE-1x ECSFB is Enabled/Disabled for a
Cell.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary 3-3
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT Impact on the RC/V subsystem Recent Change and Verify Forms
....................................................................................................................................................................................................................................
The Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT support) optional
feature uses the following fields in the cell3g form, as shown in Table 3-3, “Related fields
in the cell3g form” (p. 3-4).
....................................................................................................................................................................................................................................
3-4 Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
Impact on the RC/V subsystem Recent Change and Verify Forms
DRAFT
....................................................................................................................................................................................................................................
ceqface form
Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT support) optional
feature uses the following fields in the ceqface form, as shown in Table 3-4, “Related
fields in the ceqface form” (p. 3-5).
Allowed
Field name Description values
LTE-1x ECSFB Traffic The LTE-1x ECSFB Traffic Channel Allowed Values
Channel Preference Preference Delta (%) will be applied to for the
Delta (%) individual channels on the target CDMA sector per-sector view:
during traffic channel selection to affect the -50% to 50% in
likelihood that the Cell will select a particular increments of
channel for call setup for an eCSFB call. 5%. Default
value for
per-sector view
is 0%
Allowed Values
for the alternate
per-sector view:
blank, -50% to
50% in
increments of
5% . Default
value for
alternate
per-sector view
is blank
Allowed Values
for the second
alternate
per-sector view:
blank, -50% to
50% in
increments of
5%. Default
value for second
alternate
per-sector view
is blank
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary 3-5
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT Impact on the RC/V subsystem Recent Change and Verify Forms
....................................................................................................................................................................................................................................
Table 3-4 Related fields in the ceqface form (continued)
Allowed
Field name Description values
ECSFB Inner Ec/Io This parameter provides an inner threshold for Allowed Values
Threshold the Distance Based Origination/Termination for the
feature for eCSFB call setup. For eCSFB, the per-sector view:
inner threshold is an Ec/Io threshold, instead -31.5 ~ 0 dB in
of a combination of an inner distance threshold 0.5 dB
and an inner Ec/Io threshold, since reliable increments or
distance measurements are not available for off
eCSFB call setup. Allowed Values
for the alternate
per-sector view:
blank, -31.5 ~ 0
dB in 0.5 dB
increments
Allowed Values
for the second
alternate
per-sector view:
blank, -31.5 ~ 0
dB in 0.5 dB
increments
Default: Default
for the
per-sector view
is off
Default for the
alternate
per-sector view
is blank
Default for the
second alternate
per-sector view
is blank View:
Per-Sector,
alternate
Per-Sector, and
second alternate
Per-Sector
Increment: 0.5
dB
DRAFT
....................................................................................................................................................................................................................................
3-6 Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
Impact on the RC/V subsystem Recent Change and Verify Forms
DRAFT
....................................................................................................................................................................................................................................
Table 3-4 Related fields in the ceqface form (continued)
Allowed
Field name Description values
ECSFB Outer Ec/Io This parameter provides an outer threshold for Allowed Values:
Threshold the Distance Based Origination/Termination Allowed Values
feature for eCSFB call setup. For eCSFB, the for the
outer threshold is an Ec/Io threshold, instead per-sector view:
of an outer distance threshold, since reliable -31.5 ~ 0 dB in
distance measurements are not available for 0.5 dB
eCSFB call setup. increments or
off Allowed
Values for the
alternate
per-sector view:
blank, -31.5 ~ 0
dB in 0.5 dB
increments
Allowed Values
for the second
alternate
per-sector view:
blank, -31.5 ~ 0
dB in 0.5 dB
increments
Default: Default
for the
per-sector view
is off Default for
the alternate
per-sector view
is blank Default
for the second
alternate
per-sector view
is blank View:
Per-Sector,
alternate
Per-Sector, and
second alternate
Per-Sector
Increment: 0.5
dB
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary 3-7
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT Impact on the RC/V subsystem Recent Change and Verify Forms
....................................................................................................................................................................................................................................
Table 3-4 Related fields in the ceqface form (continued)
Allowed
Field name Description values
Minimum pilot strength This parameter specifies the minimum pilot Allowed Values:
for preferred band strength measurement of a preferred band 0 to -31.5
carriers to be eligible for carrier on the target sector necessary for Increment: 0.5
eCSFB traffic channel eCSFB traffic channel selection to consider dB
selection. preferred band carriers in addition to
non-preferred band carriers, when the target
CDMA channel is in the non-preferred band.
Minimum pilot strength This parameter specifies the minimum pilot Allowed Values:
for non-preferred band strength measurement of a non-preferred band 0 to -31.5
carriers to be eligible for carrier on the target sector necessary for Increment: 0.5
eCSFB traffic channel eCSFB traffic channel selection to consider dB
selection. non-preferred band carriers in addition to
preferred band carriers, when the target
CDMA channel is in the preferred band.
References
For more information about these RC/V forms and fields, see the following CDMA ®
network documents:
• Database Update Manual, 401-610-036
• Text Recent Change and Verify (RC/V) Reference, 401-610-038
DRAFT
....................................................................................................................................................................................................................................
3-8 Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
DRAFT
4 I4mpact on service
measurements
Overview
Purpose
This chapter provides detail on the impact of the Enhanced Circuit Switching Fall Back
from LTE to 3G1X (1x RTT support) optional feature on the service measurements.
Contents
Service Measurements
Introduction
The Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT support) optional
feature uses the following categories of services measurements:
Table 4-1 Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT
support) service measurements
Service
measurement Count field
subcategory Count abbreviation number Count name
ECP-PAF ECSFB ECSFB_MO_VOICE_REQ 1 Number of eCSFB
Mobile Originated Voice
Call Requests
ECP-PAF ECSFB ECSFB_MO_VOICE_REL 2 Number of eCSFB
Mobile Originated Voice
Calls Sent Release
DRAFT
...................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary 4-1
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT Impact on service measurements Service Measurements
....................................................................................................................................................................................................................................
Table 4-1 Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT
support) service measurements (continued)
Service
measurement Count field
subcategory Count abbreviation number Count name
ECP-PAF ECSFB ECSFB_MO_VOICE_ 3 Number of eCSFB
REORDER Mobile Originated Voice
Calls Sent Reorder
ECP-PAF ECSFB ECSFB_MO_VOICE_ 4 Number of eCSFB
ECAM Mobile Originated Voice
Calls Sent ECAM
ECP-PAF ECSFB ECSFB_MO_VOICE_SENT_ 5 Number of eCSFB
UHDM Mobile Originated Voice
Calls Sent UHDM
ECP-PAF ECSFB ECSFB_MO_VOICE_UHDM_6 Number of eCSFB
SUCCESS Mobile Originated Voice
Calls Successfully Setup
via UHDM
ECP-PAF ECSFB ECSFB_MT_VOICE_REQ 7 Number of eCSFB
Mobile Terminated
Voice Calls
ECP-PAF ECSFB ECSFB_MT_VOICE_REL 8 Number of eCSFB
Mobile Terminated
Voice Calls Sent Release
ECP-PAF ECSFB ECSFB_MT_VOICE_SENT_ 9 Number of eCSFB
ECAM Mobile Terminated
Voice Calls Sent ECAM
ECP-PAF ECSFB ECSFB_MT_VOICE_SENT_ 10 Number of eCSFB
UHDM Mobile Terminated
Voice Calls Sent UHDM
ECP-PAF ECSFB ECSFB_MT_VOICE_UHDM_11 Number of eCSFB
SUCCESS Mobile Terminated
Voice Calls Successfully
Setup via UHDM
ECP-PAF ECSFB ECSFB_VOICE_SETUP_ 12 Number of eCSFB
COMPLETE Voice Call Setup
Completions
DRAFT
....................................................................................................................................................................................................................................
4-2 Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
Impact on service measurements Service Measurements
DRAFT
....................................................................................................................................................................................................................................
Table 4-1 Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT
support) service measurements (continued)
Service
measurement Count field
subcategory Count abbreviation number Count name
ECP-PAF ECSFB ECSFB_HANDOFF_REQ 13 Number of eCSFB
Handoff Requests Sent
From the MSC to the
Cell
ECP-PAF ECSFB ECSFB_TCA_COMPLETE 14 Number of eCSFB
Traffic Channel
Assignments Complete
ECP-PAF ECSFB ECSFB_CS_ATTEMPTS_ 15 Number of eCSFB call
UNK_PILOTS setup attempts with
unknown pilots
ECP-PAF ECSFB ECSFB_CALL_SETUP_ 16 Number of MSC
TIMEOUTS_HANDOFF_ Timeouts Waiting for
VOICE_CH_CONF Handoff Voice Channel
Confirmation After
Sending UHDM for
eCSFB Call Setup
ECP-PAF ECSFB ECSFB_HANDOFF_VOICE_ 17 Number of Handoff
CH_CONF Voice Channel
Confirmations Sent
from the Cell to the
MSC for eCSFB Call
ECP-PAF ECSFB ECSFB_TCA_FAILURES 18 Number of Handoff
Traffic Channel
Assignment Failures
Received by the MSC
for eCSFB Calls
ECP-PAF ECSFB ECSFB_TOTAL_CS_LATENCY_
19 Total eCSFB Call Setup
UHDM Latency From Receipt
of Origination/Page
Response to
Transmission of UHDM
ECP-PAF ECSFB ECSFB_MT_VOICE_PGRES_20 Number of Mobile
1X_1 Terminating ECSFB
Voice S102 page #1
response from 1x BTS
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary 4-3
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT Impact on service measurements Service Measurements
....................................................................................................................................................................................................................................
Table 4-1 Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT
support) service measurements (continued)
Service
measurement Count field
subcategory Count abbreviation number Count name
ECP-PAF ECSFB ECSFB_MT_VOICE_PGRES_21 Number of Mobile
1X_2 Terminating ECSFB
Voice Page #2 Response
from 1x BTS
ECSFB-S102 ECSFB_LBS_SUCCESS 1 Number of Successful
LBS Transactions
ECSFB-S102 ECSFB_LBS_FAIL 2 Number of Failed LBS
Transactions
ECSFB-S102 ECSFB_LBS_TOTAL_ 3 Total LBS Transaction
LATENCY Latency
ECSFB-S102 ECSFB_LBS_MT_PAGE 4 Number of Mobile
Terminated (MT) Pages
for LBS
ECSFB-S102 ECSFB_VMN_TO_IWS 5 Number of Voice Mail
Notification (VMN) sent
to IWS
ECSFB-S102 S102_TUNNEL_ 6 Number of S102 Tunnel
REDIRECT Redirection Requests
ECSFB-S102-AR ECSFB_REG_REQ_HOME 1 ECSFB Registration
Requests for Home
Subscribers
ECSFB-S102-AR ECSFB_REG_REQ_ROAM 2 ECSFB Registration
Requests for Roaming
Subscribers
ECSFB-S102-AR ECSFB_REG_REQ_ 3 Number of Failed
FAILED Registration Requests
ECSFB-S102-AR ECSFB_REG_REQ_POWERUP_
4 Number of Registration
HOME Requests over S102 for
home subscriber UEs
for power up
ECSFB-S102-AR ECSFB_REG_REQ_POWERUP_
5 Number of Registration
ROAM Requests over S102 for
roaming subscriber UEs
for power up
DRAFT
....................................................................................................................................................................................................................................
4-4 Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
Impact on service measurements Service Measurements
DRAFT
....................................................................................................................................................................................................................................
Table 4-1 Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT
support) service measurements (continued)
Service
measurement Count field
subcategory Count abbreviation number Count name
ECSFB-S102-AR ECSFB_REG_REQ_ 6 Number of Registration
POWERDOWN_HOME Requests over S102 for
home subscriber UEs
for power down
ECSFB-S102-AR ECSFB_REG_REQ_ 7 Number of Registration
POWERDOWN_ROAM Requests over S102 for
roaming subscribers
UEs for power down
ECSFB-S102-AR ECSFB_REG_REQ_PR_ 8 Home Subscriber
HOME Periodic Registrations
over S102
ECSFB-S102-AR ECSFB_REG_REQ_PR_ 9 Roamer Periodic
ROAM Registrations over S102
ECSFB-S102-AR ECSFB_REG_REQ_PCR_ 10 Home Subscriber
HOME Parameter Change
Registrations over S102
ECSFB-S102-AR ECSFB_REG_REQ_PCR_ 11 Roamer Parameter
ROAM Change Registrations
over S102
ECSFB-S102-AR ECSFB_REG_REQ_ZIR_ 12 Home Subscriber Zone
HOME ID/Location Area
Registrations over S102
ECSFB-S102-AR ECSFB_REG_REQ_ZIR_ 13 Roamer Zone
ROAM ID/Location Area
Registrations over S102
ECSFB-S102- ECSFB_MO_SMS_REQ_ 1 Number of ECSFB
SMS ATTEMPTS Mobile Originated SMS
Requests / Attempts
ECSFB-S102- ECSFB_MO_SMS_ 2 Number of Successful
SMS SUCCESS ECSFB Mobile
Originated SMSs
ECSFB-S102- ECSFB_MT_SMS_ 3 Number of Mobile
SMS ATTEMPTS Terminating ECSFB
SMS Attempts using
S102
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary 4-5
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT Impact on service measurements Service Measurements
....................................................................................................................................................................................................................................
Table 4-1 Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT
support) service measurements (continued)
Service
measurement Count field
subcategory Count abbreviation number Count name
ECSFB-S102- ECSFB_MT_SMS_ 4 Number of Successful
SMS SUCCESS Mobile Terminating
ECSFB SMSs Using
S102
ECSFB-S102- ECSFB_MT_SMS_SO76_ 5 Number of Mobile
SMS PGRES_1 Terminated ECSFB
SMS #1 Page Response
From S102 Using SO76
ECSFB-S102- ECSFB_MT_SMS_SO76_ 6 Number of Mobile
SMS PGRES_2 Terminating ECSFB
SMSs #2 (Repeat) Page
Responses Received
Using SO76
ECSFB-S102- ECSFB_MT_SMS_SO76_ 7 Number of Mobile
SMS PG_1 Terminated ECSFB
SMS #1 Page Attempts
Using SO76
ECSFB-S102- ECSFB_MT_SMS_SO76_ 8 Number of Mobile
SMS PG_2 Terminating ECSFB
SMSs #2 (Repeat) Pages
Using SO76
ECSFB-S102- ECSFB_MO_VOICE_REQ 1 Number of eCSFB
VOICE Mobile Originated Voice
Call Requests
ECSFB-S102- ECSFB_MO_VOICE_ 2 Number of eCSFB
VOICE ECAM Mobile Originated Voice
Calls Sent ECAM
ECSFB-S102- ECSFB_MO_VOICE_REL 3 Number of eCSFB
VOICE Mobile Originated Voice
Calls Sent Release
ECSFB-S102- ECSFB_MO_VOICE_ 4 Number of eCSFB
VOICE REORDER Mobile Originated Voice
Calls Sent Reorder
DRAFT
....................................................................................................................................................................................................................................
4-6 Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
Impact on service measurements Service Measurements
DRAFT
....................................................................................................................................................................................................................................
Table 4-1 Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT
support) service measurements (continued)
Service
measurement Count field
subcategory Count abbreviation number Count name
ECSFB-S102- ECSFB_MO_VOICE_SENT_ 5 Number of eCSFB
VOICE UHDM Mobile Originated Voice
Calls Sent UHDM
ECSFB-S102- ECSFB_MO_VOICE_UHDM_6 Number of eCSFB
VOICE SUCCESS Mobile Originated Voice
Calls Successfully Setup
via UHDM
ECSFB-S102- ECSFB_MT_VOICE_REQ 7 Number of eCSFB
VOICE Mobile Terminated
Voice Calls
ECSFB-S102- ECSFB_MT_VOICE_REL 8 Number of eCSFB
VOICE Mobile Terminated
Voice Calls Sent Release
ECSFB-S102- ECSFB_MT_VOICE_FAILED_9 Number of Mobile
VOICE PAGES Terminating ECSFB
Voice Failed Pages
ECSFB-S102- ECSFB_MT_VOICE_ISPG2_ 10 Number of Mobile
VOICE 1 Terminating ECSFB
Voice S102 ISPAGE2
#1 requests sent to
Border MSC
ECSFB-S102- ECSFB_MT_VOICE_ISPG2_ 11 Number of Mobile
VOICE 2 Terminating ECSFB
Voice ISPAGE2 repeat
requests (#2) sent to
Border MSC
ECSFB-S102- ECSFB_MT_VOICE_ISPG2_ 12 Number of Mobile
VOICE RES_1 Terminating ECSFB
Voice S102 ISPAGE2
#1 page response
received from Border
MSC
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary 4-7
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT Impact on service measurements Service Measurements
....................................................................................................................................................................................................................................
Table 4-1 Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT
support) service measurements (continued)
Service
measurement Count field
subcategory Count abbreviation number Count name
ECSFB-S102- ECSFB_MT_VOICE_ISPG2_ 13 Number of Mobile
VOICE RES_2 Terminating ECSFB
Voice ISPAGE2 #2
response received from
Border MSC
ECSFB-S102- ECSFB_MT_VOICE_PGRES_14 Number of Mobile
VOICE 1X_1 Terminating ECSFB
Voice S102 page #1
response from 1x BTS
ECSFB-S102- ECSFB_MT_VOICE_PGRES_15 Number of Mobile
VOICE 1X_2 Terminating ECSFB
Voice Page #2 Response
from 1x BTS
ECSFB-S102- ECSFB_MT_VOICE_PGRES_16 Number of Mobile
VOICE S102_1 Terminating ECSFB
Voice S102 page #1
response from S102
ECSFB-S102- ECSFB_MT_VOICE_PGRES_17 Number of Mobile
VOICE S102_2 Terminating ECSFB
Voice Page #2 Response
from S102
ECSFB-S102- ECSFB_MT_VOICE_PG_1 18 Number of Mobile
VOICE Terminating ECSFB
Voice S102 page #1
request
ECSFB-S102- ECSFB_MT_VOICE_PG_2 19 Number of Mobile
VOICE Terminating ECSFB
Voice Repeat Page(page
#2) Request
ECSFB-S102- ECSFB_MT_VOICE_SENT_ 20 Number of eCSFB
VOICE ECAM Mobile Terminated
Voice Calls Sent ECAM
ECSFB-S102- ECSFB_MT_VOICE_SENT_ 21 Number of eCSFB
VOICE UHDM Mobile Terminated
Voice Calls Sent UHDM
DRAFT
....................................................................................................................................................................................................................................
4-8 Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
Impact on service measurements Service Measurements
DRAFT
....................................................................................................................................................................................................................................
Table 4-1 Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT
support) service measurements (continued)
Service
measurement Count field
subcategory Count abbreviation number Count name
ECSFB-S102- ECSFB_VOICE_SETUP_ 22 Number of eCSFB
VOICE COMPLETE Voice Call Setup
Completions
ECSFB-S102- ECSFB_MT_VOICE_UHDM_23 Number of eCSFB
VOICE SUCCESS Mobile Terminated
Voice Calls Successfully
Setup via UHDM
ECSFB-S102- ECSFB_HANDOFF_REQ 24 Number of eCSFB
VOICE Handoff Requests Sent
From the MSC to the
Cell
ECSFB-S102- ECSFB_HANDOFF_VOICE_ 25 Number of Handoff
VOICE CH_CONF Voice Channel
Confirmations Sent
from the Cell to the
MSC for eCSFB Call
ECSFB-S102- ECSFB_TCA_FAILURES 26 Number of Handoff
VOICE Traffic Channel
Assignment Failures
Received by the MSC
for eCSFB Calls
ECSFB-S102- ECSFB_CS_ATTEMPTS_ 27 Number of eCSFB call
VOICE UNK_PILOTS setup attempts with
unknown pilots
ECSFB-S102- ECSFB_CALL_SETUP_ 28 Number of MSC
VOICE TIMEOUTS_HANDOFF_ Timeouts Waiting for
VOICE_CH_CONF Handoff Voice Channel
Confirmation After
Sending UHDM for
eCSFB Call Setup
ECSFB-S102- ECSFB_TCA_COMPLETE 29 Number of eCSFB
VOICE Traffic Channel
Assignments Complete
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary 4-9
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT Impact on service measurements Service Measurements
....................................................................................................................................................................................................................................
Table 4-1 Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT
support) service measurements (continued)
Service
measurement Count field
subcategory Count abbreviation number Count name
ECSFB-S102- ECSFB_UHDM_ABORTS_ 30 Number of eCSFB Call
VOICE RCV Setup (via UHDM)
Aborts Received from
the S102 Interface
ECSFB-S102- ECSFB_TOTAL_CS_LATENCY_
31 Total eCSFB Call Setup
VOICE UHDM Latency From Receipt
of Origination/Page
Response to
Transmission of UHDM
OC S102_PROCESS_AVE_PO 72 Average Processor
Occupancy Attributed to
S102 (A21) Service
Process
OC S102_PROCESS_PEAK_ 73 Peak Processor
PO Occupancy Attributed to
S102 (A21) Service
Process
References
For detailed information about the service measurements, see CDMA ® Wireless Networks
Service Measurement, 401-610-135.
DRAFT
....................................................................................................................................................................................................................................
4-10 Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
DRAFT
5 I5mpact on Technician
Interface (TI) CLI
Overview
Purpose
The following information provides the list of TICLI commands supported by Enhanced
Circuit Switching Fall Back from LTE to 3G1X (1x RTT support) optional feature.
Contents
TICLI commands
Details of Input commands
The following input commands are modified as part of this feature:
• OP:A21SERV a, STATUS — Report the maintenance status of an A21 Service
(A21SERV) application and all the A21 interfaces associated with the A21SERV on
the Mobile Switching Center (MSC).
• RMV:A21SERV a, IFACE b Removes the A21 interface from A21SERV. On
successful completion of this command the A21 interface will be in the
OOS-MANUAL state.
• RMV:AP a, A21SERV b, [;UCL] Removes the AP A21SERV application from
service. On successful completion of this command the A21SERV application will be
in the OOS-MANUAL state. An attempt to switchover the A21SERV application
running in an active state will be made for both conditional or unconditional removes.
If A21SERV cannot be switched over to the mate AP and the UCL parameter is not
specified, this command will fail. If UCL is specified, the A21SERV application will
be removed from service even if the A21SERV cannot be switched over to the mate
AP.
DRAFT
...................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary 5-1
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT Impact on Technician Interface (TI) CLI TICLI commands
....................................................................................................................................................................................................................................
• RST:A21SERV a, IFACE b Restores the A21 interface to A21 Service (A21SERV).
On successful completion of this command, the A21 interface will be in the ACTIVE
state.
• RST:AP a, A21SERV b Restores the Application Processor (AP) A21 Service
(A21SERV) application to service. On successful completion of this command, the
A21SERV managed object will be in the ACTIVE or STBY maintenance state
depending on the state of the application on the mate AP.If the application is ACTIVE
on the mate AP, it will be brought to the STBY state on this AP. If the application is
not ACTIVE on the mate AP, the application will be brought to the ACTIVE state on
this AP.
• SWITCHOVER:A21SERV a[;UCL] Switches the Application Processor (AP) A21
Service (A21SERV) application to another AP. On successful completion of this
command, the state of the A21SERV application will be switched from ACTIVE to
STBY on this AP, and on the mate AP from STBY to ACTIVE.
References
For more information on TICLI commands, see the following documents:
• Input Messages Manual, 401-610-055
• Output Messages Manual, 401-610-057
DRAFT
....................................................................................................................................................................................................................................
5-2 Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
DRAFT
6 Feature Implementation
6
Overview
Purpose
This chapter provides information on the procedures and their sequence to be performed
to implement the Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT
support) optional feature.
Contents
...................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary 6-1
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT Feature Implementation Feature Activation
....................................................................................................................................................................................................................................
Feature Activation
Purpose
This procedure activates the Enhanced Circuit Switching Fall Back from LTE to 3G1X
(1x RTT support) optional feature in a CDMA2000 ® network.
Procedure
Perform the following steps:
...................................................................................................................................................................................................
1 Ask your account representative to activate the desired entries in your FAF for FID
39211.3 - Enhanced Circuit Switching Fall Back from LTE to 3G1X (1x RTT support)
LTECSFB
...................................................................................................................................................................................................
2 Proceed to “Provisioning appctl form for Enhanced Circuit Switching Fall Back from
LTE to 3G1X (1x RTT support) optional feature” (p. 6-3).
E...................................................................................................................................................................................................
N D O F S T E P S
DRAFT
....................................................................................................................................................................................................................................
6-2 Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
Feature Implementation Provisioning appctl form for Enhanced Circuit Switching Fall
DRAFT
Back from LTE to 3G1X (1x RTT support) optional feature
....................................................................................................................................................................................................................................
Fields to be populated
The fields that you must populate in the appctl form are described in Table 6-1, “Fields to
be populated in the appctl form” (p. 6-3).
Text RC/V
Field name name Value to be entered Restrictions
LTE-1X ECSFB ecsfb_bc none NA
Preferred Band Class BC 0 (850)
for CDMA 1x Voice
BC 1 (1900)
BC 2 (TACS)
BC 3 (JTACS)
BC 4 (1800)
BC 5 (450)
BC 6 (IMT-2000)
BC 7 (700)
BC 8 (BC8-1800)
BC 9 (900)
BC 10 (SEC-800)
BC 14 (US PCS)
BC 15 (AWS)
BC 18 (700 MHz Public
Safety)
BC 19 (Lower 700 MHz)
Default = none
LTE-1x ECSFB Simplex (ecsfb_ enabled/disabled
Setup for CDMA Voice simplex) Default = disabled
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary 6-3
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT Feature Implementation Provisioning appctl form for Enhanced Circuit Switching Fall
Back from LTE to 3G1X (1x RTT support) optional feature
....................................................................................................................................................................................................................................
Table 6-1 Fields to be populated in the appctl form (continued)
Text RC/V
Field name name Value to be entered Restrictions
LTE-1X ECSFB Feature y (yes), n (no)
(lte_csfbext_ 1. This
Extensions (Enhanced enbl) Default = n parameter can
Circuit Switch be set to 'y'
FallBack) only if: - the
FAF for
FID-160548 is
activated. -
LTE-1X
ECSFB
parameter in
appctl form is
turned “on”.
Procedure
Perform the following steps:
...................................................................................................................................................................................................
2 Advance to the screen that contains the LTE-1X ECSFB Preferred Band Class for CDMA
1x Voice field.
DRAFT
....................................................................................................................................................................................................................................
6-4 Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
Feature Implementation Provisioning appctl form for Enhanced Circuit Switching Fall
DRAFT
Back from LTE to 3G1X (1x RTT support) optional feature
....................................................................................................................................................................................................................................
Result: The appctl form is displayed, as shown in the following Figure 6-1, “appctl
form” (p. 6-5).
...................................................................................................................................................................................................
3 Enter appropriate values in the LTE-1X ECSFB Preferred Band Class for CDMA 1x Voice
and LTE-1X ECSFB Simplex Setup for CDMA Voice fields.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary 6-5
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT Feature Implementation Provisioning cell3g form for the Enhanced Circuit Switching
Fall Back from LTE to 3G1X (1x RTT support) optional
feature
....................................................................................................................................................................................................................................
Fields to be populated
The fields that you must populate in the cell3g form are described in Table 6-2, “Fields
to be populated in the cell3g form” (p. 6-6).
Procedure
Perform the following steps:
...................................................................................................................................................................................................
2 Advance to the screen that contains the LTE-1X ECSFB Cell Enable/Disable field.
DRAFT
....................................................................................................................................................................................................................................
6-6 Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
Feature Implementation Provisioning cell3g form for the Enhanced Circuit Switching
DRAFT
Fall Back from LTE to 3G1X (1x RTT support) optional
feature
....................................................................................................................................................................................................................................
Result: The cell3g form is displayed, as shown in the following Figure 6-2, “cell3g
form” (p. 6-7).
...................................................................................................................................................................................................
3 In the LTE-1x ECSFB Cell Enable field, enter appropriate value yes or no based on the
situation.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary 6-7
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT Feature Implementation Provisioning ceqface form for the Enhanced Circuit
Switching Fall Back from LTE to 3G1X (1x RTT support)
optional feature
....................................................................................................................................................................................................................................
Fields to be populated
The fields that you must populate in the ceqface form are described in Table 6-3,
“Related fields in the ceqface form” (p. 6-8).
....................................................................................................................................................................................................................................
6-8 Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
Feature Implementation Provisioning ceqface form for the Enhanced Circuit
DRAFT
Switching Fall Back from LTE to 3G1X (1x RTT support)
optional feature
....................................................................................................................................................................................................................................
Table 6-3 Related fields in the ceqface form (continued)
....................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary 6-9
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT Feature Implementation Provisioning ceqface form for the Enhanced Circuit
Switching Fall Back from LTE to 3G1X (1x RTT support)
optional feature
....................................................................................................................................................................................................................................
Table 6-3 Related fields in the ceqface form (continued)
....................................................................................................................................................................................................................................
6-10 Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
Feature Implementation Provisioning ceqface form for the Enhanced Circuit
DRAFT
Switching Fall Back from LTE to 3G1X (1x RTT support)
optional feature
....................................................................................................................................................................................................................................
Table 6-3 Related fields in the ceqface form (continued)
....................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary 6-11
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT Feature Implementation Provisioning ceqface form for the Enhanced Circuit
Switching Fall Back from LTE to 3G1X (1x RTT support)
optional feature
....................................................................................................................................................................................................................................
Procedure
Perform the following steps:
...................................................................................................................................................................................................
2 Advance to the screen that contains the ECSFB Inner Ec/Io Threshold and ECSFB Outer
Ec/Io Thresholdfields.
Result: Examples of the two ceqface forms are shown below:
....................................................................................................................................................................................................................................
6-12 Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
Feature Implementation Provisioning ceqface form for the Enhanced Circuit
DRAFT
Switching Fall Back from LTE to 3G1X (1x RTT support)
optional feature
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary 6-13
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT Feature Implementation Configure external links on A21 APs
....................................................................................................................................................................................................................................
Procedure
Perform the following steps:
...................................................................................................................................................................................................
1 Open the apeqp form and enter data for the following fields.
• Interface Name
• CNID
• Application Name = A21
...................................................................................................................................................................................................
2 Confirm that these fields on the apeqp forms for the two APs have been automatically
populated:
• External IP address (display only)
• Subnet Mask
• First Hop Router Address 1
• First Hop Router Address 2
• Gateway IP address
E...................................................................................................................................................................................................
N D O F S T E P S
DRAFT
....................................................................................................................................................................................................................................
6-14 Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
Feature Implementation Grow an A21 instance
DRAFT
....................................................................................................................................................................................................................................
Procedure
Perform the following steps:
...................................................................................................................................................................................................
1 Enter the following information in the A21 form in RC/V and then insert the form.
• Primary AP
• Interface Name
• 3G-1x A21 Service for EVDO/CSFB - to indicate if this form is for EVDO or CSFB.
id 2 is used for S102
...................................................................................................................................................................................................
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary 6-15
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT Feature Implementation Grow an A21 instance
....................................................................................................................................................................................................................................
Result: An example of the apeqp form is as shown below:
...................................................................................................................................................................................................
DRAFT
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary 6-17
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT Feature Implementation Activate CSFB
....................................................................................................................................................................................................................................
Activate CSFB
Purpose
This procedure provides instructions to activate CSFB.
Procedure
Perform the following steps:
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
6-18 Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
Feature Implementation De-grow A21 instance
DRAFT
....................................................................................................................................................................................................................................
Procedure
Perform the following steps:
...................................................................................................................................................................................................
4 Execute the OP:A21SERV-STATUS command; the A21 service is not included in the
output.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary 6-19
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT Feature Implementation De-configure external links on A21 AP
....................................................................................................................................................................................................................................
Procedure
Perform the following steps:
...................................................................................................................................................................................................
1 Access apeqp form in RC/V and remove external link information for the external
interface assigned.
E...................................................................................................................................................................................................
N D O F S T E P S
DRAFT
....................................................................................................................................................................................................................................
6-20 Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
DRAFT
7 Related Documentation
7
Overview
Purpose
This chapter lists the documents related to Enhanced Circuit Switching Fall Back from
LTE to 3G1X (1x RTT support) optional feature and associated feature functionalities.
Contents
Related Documentation
References
The following CDMA2000 ® network document are referenced in this document or
provide additional information that relates to the Enhanced Circuit Switching Fall Back
from LTE to 3G1X (1x RTT support) optional feature.
• Text Recent Change and Verify (RC/V) Reference, 401-610-038
• Service Measurements, 401-610-135
DRAFT
...................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary 7-1
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT Related Documentation Related Documentation
....................................................................................................................................................................................................................................
DRAFT
....................................................................................................................................................................................................................................
7-2 Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
DRAFT
Appendix A: Abbreviations
Overview
Purpose
This appendix lists the abbreviations used in this document along with their expansions.
Contents
Introduction A-1
Introduction
A
ANSI American National Standards Institute
A21 A21 Interface carries Signaling information between 1x EVDO RNC and 3G1x
MSC
C
CDMA Code Division Multiple Access
CSFB Circuit Switch Fallback
E
ECP Executive Cellular Processor
eCSFB Enhanced Circuit Switch Fallback
F
FAF Feature Activation File
DRAFT
....................................................................................................................................................................................................................................
H
HLR Home Location Register
I
IS-95B Interim Standards 95 B
M
MSC Mobile Switching Center
MMC Mobility Manager Compact
MME Mobility Management Entity
R
RC/V Recent Change/Verify
S
SHLR Stand-alone HLR
SMs Service Measurements
DRAFT
....................................................................................................................................................................................................................................
A-2 Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013
Index
DRAFT
A availability, 1-2
P prerequisites, 1-3
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent CDMA Alcatel-Lucent – Proprietary IN-1
401-612-993 Release 40.1 Use pursuant to applicable agreements
Issue 1 February 2013
DRAFT Index
....................................................................................................................................................................................................................................
DRAFT
....................................................................................................................................................................................................................................
IN-2 Alcatel-Lucent – Proprietary Alcatel-Lucent CDMA
Use pursuant to applicable agreements 401-612-993 Release 40.1
Issue 1 February 2013