This document contains an evaluation of problems with an orthotic device and proposed solutions. It lists 4 problems: 1) the calf area and malleolus shape is irregular, 2) the patella shape is missing, 3) many areas are uneven, and 4) the posterior wall is not normally shaped. For each problem, the likely causes are identified such as damage during casting or uneven buildup of materials. Solutions tried include reconnecting parts, reducing irregular shapes, adding material to bumpy areas, and shaping areas to be more normal.
This document contains an evaluation of problems with an orthotic device and proposed solutions. It lists 4 problems: 1) the calf area and malleolus shape is irregular, 2) the patella shape is missing, 3) many areas are uneven, and 4) the posterior wall is not normally shaped. For each problem, the likely causes are identified such as damage during casting or uneven buildup of materials. Solutions tried include reconnecting parts, reducing irregular shapes, adding material to bumpy areas, and shaping areas to be more normal.
This document contains an evaluation of problems with an orthotic device and proposed solutions. It lists 4 problems: 1) the calf area and malleolus shape is irregular, 2) the patella shape is missing, 3) many areas are uneven, and 4) the posterior wall is not normally shaped. For each problem, the likely causes are identified such as damage during casting or uneven buildup of materials. Solutions tried include reconnecting parts, reducing irregular shapes, adding material to bumpy areas, and shaping areas to be more normal.
Student ID : P17127019006 Subject : ADP Course Year : 3 ( semester V)
EVALUATION RECTIFICATION STAGE
No Problem Causes Problem Solving
1. The calf area and above When at the casting stage, I tried to malleolus is not in good the negative cast was connected the two shape. damaged became devided part again with by two because when do helping from (sebelum take off di wrap stage after slab stage alignment lign reinforce, dibagian slab on casting, the surface of from sagittal and nya karena kalau slab stage was already dry, connected line so it wont connected well. from the seam at medial part after casting stage. At rectification stage, i done the reduction at irregular shape around calf and above malleoli until it close to the normal shape then i done some build up at the area that still bumpy or uneven area. 2. The shape of patella bone At casting stage, I wasnt shapping is gone. the patella is not the patella but i cover enough. just shapping the At filling stage, PTB area. when i done the extension part for the proximal part of the negative cast, the edges fold area is not in good shape so its hit by the POP mixture. 3. There are many area that The negative cast is I done build up at are not even. too much folding the area that not part or too much even and try to build up bandage reach the normal area. shape. 4. The W shape of posterior When build up wall is not in normal posterior wall with shape pop bandage the shape is not normall or incline.