Professional Documents
Culture Documents
Autocad Mcqs Test Unique Civil
Autocad Mcqs Test Unique Civil
2. Choose one of the best option from the following. Why do we have 16,7 M colors
in RGB ______?
A. Because we want compatibility between PC and Macintosh
B. since this is the limit of graphics cards
C. For each color we have 256 shades and colors combination third
D. Because so one can distinguish man
4. Indicate best option. What are the various options from left to right and the
opposite direction_____?
A. Select objects according to their position
B. select objects according to their color
C. Choose a different category of objects
D. No difference
5. When a drawing in 2D, what axis do you (NOT) work with ___?
A. Y
B. X
C. Z
D. WCS
6. The primary difference between the Layout tab(s) and the Model tab is ____
A. the color of the background
B. the Model tab is where you create the drawing and a Layout tab represents the
sheet that you will plot or print on
C. the Model tab is used for drawing in 3D and a Layout is used for drawing in 2D
D. the Model tab displays the drawing you are copying from and the Layout tab is
where you lay out the new drawing
11.Indicate the best option from the following. What do the letters UCS _____?
A. Uniform Calculator System
B. Universal Coordinate System
C. Universal CAD Settings
D. United CAD System
15.What are the various options from left to right and the different direction_____?
A. Choose a different category of objects
B. Select objects according to their position
C. select objects according to their color
D. No difference
16. From the following Which is corresponded to the zoom mouse wheel?
A. scale
B. pan & scan
C. extents / all
D. Zoom in / zoom out
21. Where should you pay concentration when you are working with AutoCAD
commands?
A. Drawing area
B. Status bar
C. Command window
D. Tool bars
23.Indicate the best option. how many SNAP points does an object have?
A. 1
B. 5
C. 4
D. Depend on object
24. How many points do you need to know for the rectangle command?
A. One
B. Three
C. Two
D. Four
25.Choose best option. how would you select set of objects in a drawing?
A. Shift+ clicking on the objects
B. By a crossing window drawn left to right
C. By a crossing window is drawn from right to left
D. None of the above
26. Which is the best option from the following how will you deselect an object while
you are selecting a set of objects?
A. Ctrl+ click on the object to be removed
B. Alt + Click on the object to be removed
C. Shift + Click on the object to be removed
D. None of the above
27.Choose one of the best options from the following. Print scale 1:50 means this
____
A. The draft is 50 times less expensive than the original
B. A measure corresponds to 50 cm
C. A 3 cm corresponds to half a meter
D. None of the above
29. What symbol shows the snap point to the closest point____?
A. with circles and dots in the center
B. With two triangle
C. With Diamond
D. With three orthogonal
30. To print the entire project, you will choose to regulate what to plot _____?
A. Display
B. Limits
C. Extends
D. Window