Professional Documents
Culture Documents
Operating instructions
Index Page
BOSCH 3
Thank you for buying the Sensixx Important
B35L steam station, the new steam- Carefully read through the operating
ironing system from Bosch. instructions for the appliance and
Please visit www.bosch-home.co.uk safeguard them for future reference.
for more product information or to Open out the first page of the booklet,
register your product, just follow this will help you to understand how the
the link to the Online guarantee appliance works.
registration. This appliance complies with
international safety standards.
Introduction
This appliance has been designed
These instructions for use contain
exclusively for domestic use and must
valuable information about the unique
not be used for industrial purposes.
features of this system and some hints
to make ironing easier for you. We This appliance must be used only for
hope that you enjoy ironing with this the purposes for which it was designed,
steam station. i.e. as an iron. Any other use will be
considered improper and consequently
dangerous. The manufacturer will not
be held responsible for any damage
arising from misuse or improper use.
4 BOSCH
• This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction
concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play
with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
• Keep the iron and its cord out of reach of children less
than 8 years of age when it is energized or cooling down.
• CAUTION. Hot surface.
Surface is liable to get hot during use.
BOSCH 5
1 Description
6 BOSCH
2 Preparations
BOSCH 7
Setting the
3 temperature
1. Check the ironing instruction label on
the garment to determine the correct
ironing temperature.
2. Turn the temperature selector (11) to
the required setting:
• Synthetics
•• Silk – Wool
••• Cotton – Linen
8 BOSCH
When the steam release button is
activated, the steam generator will
release three powerful shots of steam
so that the steam reaches even deeper
into the fabrics.
1. Set the temperature selector (11) on
“•••”
2. Briefly press the steam shot button
(13*) on the top of the handle.
“Intelligent steam”
or (model dependent)
Press the steam release button (12)
8 function
on the bottom of the handle two times
in quick succession (double-click). (model dependent)
Remarks: This system has intelligent steam
control, which, after releasing the steam
• It is possible to stop the shots of
release button (12-13*), provides a
steam by quickly pressing the steam
small amount of additional steam.
button again.
The additional steam can always be
• Some water drops may appear when
stopped by briefly pressing the steam
you use the “PulseSteam” function
release button once again.
for the first time.
The water drops will disappear after
Energy saving
you have used the function for some
time.
9 “eco” setting
(model dependent)
Ironing without
6 steam
If the “eco” steam setting on the steam
control (5*) is selected, the energy
consumption of the appliance will be
Begin ironing but without pressing the
reduced, by means of the reduction of
steam release button.
water consumption and electricity.
A good ironing result can be obtained
7 Vertical steam for most garments.
Use higher settings only for thick and
highly wrinkled fabrics.
This can be used to remove creases
from hanging clothes, curtains etc.
Warning!:
• Never direct the steam jet at
10 Auto shut-off
garments that are being worn.
(model dependent)
• Never aim the steam at people or
animals. If during ironing, the steam release
button (12-13*) on the iron handle
1. Set the temperature to the “•••” setting.
is not pressed for a certain length of
2. Hold the iron in an upright position time (8 minutes), the steam station will
15 cm away from the garment being automatically switch off.
steamed.
The “auto shut-off” pilot lamp (4) will
3. You can steam iron curtains and flash when auto shut-off has been
hanging garments (jackets, suits, activated.
coats...) by placing the iron in a
To switch the steam station back on,
vertical position and pressing the
press the steam release button again.
steam release button (12-13*).
BOSCH 9
1. Check carefully that the appliance is
Fabric protection
11 soleplate cover
cold and unplugged for more than 2
hours, and that the water tank (1) is
empty.
(model dependent)
2. Place your appliance on the edge of
The fabric-protection soleplate cover your kitchen sink.
(16*) is used for steam-ironing delicate
3. Remove the plastic cover located
garments at maximum temperature
on the bottom of the appliance by
without damaging them. Use of the
soleplate cover also does away with turning it to the position.
the need for a cloth to prevent shine on 4. Unscrew the boiler drainage plug
dark materials. using a coin.
It is advisable to first iron a small 5. Holding your steam generator in
section on the inside of the garment to upside down position, and using a
see if it is suitable. jug, fill the boiler (in the base unit)
To attach the soleplate cover to the with 1/4 litre of water.
iron, place the tip of the iron into the 6. Shake the base unit for a few
end of the soleplate cover and pull the moments and then empty it
elastic strap over the lower rear of the completely over a sink or bucket.
iron until it fits tightly. To release the To obtain the best result, we
soleplate cover, pull the elastic strap recommend that this operation is
and remove the iron. done twice.
The fabric-protection soleplate cover Important: before re-closing, make
may be purchased from our customer sure no water remains in the boiler.
service or from our website. 7. Replace and tighten up the boiler
drainage plug with a coin.
Accessory code Name of accessory
(After-sales) (online shop) 8. Insert and close the plastic cover by
turning it to the position.
571510 TDZ2045
12 Calc’n’Clean
10 BOSCH
that might be there. This could take
approximately 5 minutes.
i) Set the temperature selector (11) of
the iron to the “max” position, without
pressing the steam release button
(12-13*). The water in the steam
chamber will start evaporating. Wait
until all the water inside the chamber
has been evaporated.
Automatic clean
13 warning
j) To clean the soleplate, immediately
rub off any residue by running the
hot iron over dry cotton cloth.
(model dependent)
Pilot light (7*) will flash indicating that
boiler must be rinsed.
To reset the “Calc’n’Clean” counter,
switch the steam station off twice,
keeping it off for at least 30 seconds
each time.
(on → 30s off → on → 30s off → on)
BOSCH 11
Cleaning &
15 Maintenance
Attention! Risk of burns!
Always unplug the appliance from
the mains supply before carrying
out any cleaning or maintenance
operation on it.
12 BOSCH
Advice on
18 disposal 19 Guarantee conditions
Our goods come in optimised The terms of the guarantee for this
packaging. This basically consists in appliance are in accordance with that
using non-contaminating materials which stated by our representative for the
should be handed over to the local country in which it is sold.
waste disposal service as secondary The details of these conditions can be
raw materials. Your local town council obtained from the retailer from whom
can give you information about how to the appliance was purchased. The
dispose of obsolete appliances. purchase receipt must be presented
This appliance is labelled when making any claims against the
in accordance with terms of this guarantee.
European Directive
2012/19/EU concerning
used electrical and
electronic appliances
(waste electrical and electronic
equipment - WEEE).
The guideline determines the
framework for the return and
recycling of used appliances as
applicable throughout the EU.
20 Trouble shooting
BOSCH 13
Problem Possible causes Solution
The iron begins • During first use: certain • This is completely normal and
to smoke when components on the will stop after a short while.
switched on. appliance have been lightly
greased at the factory and
may produce a little smoke
when initially heated.
• During subsequent use: • Clean the soleplate according
the soleplate may be to the cleaning instructions in
soiled. this manual.
Water flows through • The steam function is • Reduce the steam flow when
the holes on the being used before it ironing at low temperatures.
soleplate. has reached the correct
temperature.
• The water is condensing • Point the iron away from the
inside the pipes because ironing area and press the
steam is being used for the steam release button until
first time or has not been steam is produced.
used for a long time.
• The steam generator • Clean the boiler as described
contains too much scale. in “Calc’nClean” section.
Dirt comes out • There is a build up of scale • Use tap water mixed 50%
through the or minerals in the steam with distilled or demineralised
soleplate. tank. water. To prolong the
optimum steam function, mix
tap water with distilled water
1:1. If the tap water in your
district is very hard, mix tap
water with distilled water 1:2.
• Clean the soleplate with a
damp cloth.
• Chemical products or • Never add products to the
additives have been used. water.
The iron does not • The boiler is not switched • Set the main power button (8)
produce any steam. on or the water tank is to the “I” position (illuminated
empty. in red*), and/or fill the water
tank.
• The water tank is not fitted • Fit the water tank back onto
onto the housing correctly. the housing correctly (you will
hear a click).
• The steam regulation • Increase the steam flow (see
is set to the minimum “Ironing with steam” section).
position.
The ironed garment • The selected temperature • Select a suitable temperature
turns dark and/ is too high and has for the material being ironed
or sticks to the damaged the garment. and clean the soleplate with a
soleplate. damp cloth.
14 BOSCH
Problem Possible causes Solution
The soleplate turns • This is a regular • Clean the soleplate with a
brown. consequence of continued damp cloth.
use over a long period of
time.
The appliance • Water is being pumped • This is normal.
makes a pumping into the steam tank.
sound. • The water tank is not fitted • Fit the water tank back onto
onto the housing correctly. the housing correctly (you will
• The sound will not stop. hear a click).
• If the sound will not stop, do
not use the steam generator
and contact an authorised
technical service centre.
Loss of pressure • Steam release button has • Use the steam release button
during ironing. been activated for too long at intervals. This improves
a period of time, that is, the ironing result as the
it has been pressed too textiles will be steamed, dried
frequently. and ironed properly.
Water spots appear • May be caused by steam • Wipe the textile cover of the
on the garment condensed on the ironing ironing board, and iron any
during ironing. board. water drops to dry them.
Water spots appear • Water spots are caused by • Water drops stop coming out
on the garment steam condensation in the of the soleplate after using
during use of the hose when cooling down the “PulseSteam” function for
“PulseSteam” after use. some time.
function.
The hose gets hot • This is normal. It is caused • Place the hose on the
during use. by the steam passing opposite side so that you
through the hose during cannot touch the hose during
steam ironing. ironing.
Water leakage from • Drainage plug located • Tighten up the boiler drainage
the boiler. at the bottom of the plug with a coin
appliance is loose.
The iron does not • “PulseSteam” function has • Just press the trigger once
stop steaming after been activated by double again and the iron will stop
placing it on the pad click. steaming at once.
(2).
If the above does not solve the problem, get in touch with our customer service.
You can download this manual from the local homepages of Bosch.
BOSCH 15
Customer Service
Great Britain
Bosch Customer Service
Grand Union House
Old Wolverton Road
Milton Keynes
MK12 5PT
UK +44 (0)844 892 8979
IRL +353 (0)1450 2655
www.bosch-home.co.uk