Professional Documents
Culture Documents
Email *
anhnn@comas.vn
Full Name *
Department *
CTy: COMAS
Q1. Which two features are implemented on the Packet Forwarding Engine? (Choose 1 điểm
two)
firewall filter
class of service
chassic management
https://docs.google.com/forms/d/19na_AQE8E96-wV6BbmQy3Wcpz8oqNTaa9qpU9DF1l7Q/edit#responses 1/27
23:23, 28/10/2021 THÔNG TIN CƠ BẢN
Q2. What are three functions of the RE? (Choose three.) 1 điểm
to implement policing
Q3. Referring to the exhibit, which parameter at the end of the command would provide 1 điểm
information for troubleshooting purposes?
no-timestamp
extensive
print-ascii
no-resolve
https://docs.google.com/forms/d/19na_AQE8E96-wV6BbmQy3Wcpz8oqNTaa9qpU9DF1l7Q/edit#responses 2/27
23:23, 28/10/2021 THÔNG TIN CƠ BẢN
Q4. Referring to the exhibit, what information is provided about the route to 1 điểm
192.168.47.0/24? (Choose two.)
Q5. Which command displays all IPv4 routes in the default routing instance? 1 điểm
https://docs.google.com/forms/d/19na_AQE8E96-wV6BbmQy3Wcpz8oqNTaa9qpU9DF1l7Q/edit#responses 3/27
23:23, 28/10/2021 THÔNG TIN CƠ BẢN
Q06. What are two configurable physical interface properties? (Choose two.) 1 điểm
protocol family
address
MTU
link mode
Q07. Referring to the configuration shown in the exhibit, which statement is true? 1 điểm
Traffic destined to address 192.168.5.1 will alternate between next-hops 172.16.1.2 and 172.16.1.3
https://docs.google.com/forms/d/19na_AQE8E96-wV6BbmQy3Wcpz8oqNTaa9qpU9DF1l7Q/edit#responses 4/27
23:23, 28/10/2021 THÔNG TIN CƠ BẢN
Q08. You manage an MX Series device which includes the configuration shown in the 1 điểm
exhibit. Traffic marked with DSCP 000011 is entering the ge-1/0/4 interface at102 Mbps.
The traffic exits the device on the ge-1/0/5 interface. No other traffic is transiting the
router. In this scenario, what happens to traffic exceeding 100 Mbps?
https://docs.google.com/forms/d/19na_AQE8E96-wV6BbmQy3Wcpz8oqNTaa9qpU9DF1l7Q/edit#responses 5/27
23:23, 28/10/2021 THÔNG TIN CƠ BẢN
Q09. What is the default route preference for OSPF internal? 1 điểm
10
100
150
Q10. For a network running single-area OSPF, how would you decrease the size of the 1 điểm
Add more devices to the OSPF network to help with LSDB processing
Q.11 Which OSPF LSA type is sent from the ABR to describe an ASBR that is in an area to 1 điểm
which it is connected?
Type 7
Type 5
Type 4
Type 3
https://docs.google.com/forms/d/19na_AQE8E96-wV6BbmQy3Wcpz8oqNTaa9qpU9DF1l7Q/edit#responses 6/27
23:23, 28/10/2021 THÔNG TIN CƠ BẢN
Q12. Which OSPF adjacency state is reached when a hello packet has been sent, but 1 điểm
bidirectional communication has not been established?
Down
Init
2-way
ExStart
Q.13 Which two OSPF areas allow external routes? (Choose two.) 1 điểm
backbone area
not-so-stubby area
stub area
Q14. You are troubleshooting an OSPF adjacency that is stuck in the ExStart state. What 1 điểm
would be the correct step to resolve the problem?
Determine whether the hello and dead intervals are the same on both sides.
https://docs.google.com/forms/d/19na_AQE8E96-wV6BbmQy3Wcpz8oqNTaa9qpU9DF1l7Q/edit#responses 7/27
23:23, 28/10/2021 THÔNG TIN CƠ BẢN
Q16. You are asked to redistribute routes into OSPF. Which action accomplishes this 1 điểm
task?
Create a redistribution policy and apply it as an export policy under the [edit protocols ospf area]
hierarchy
Create a redistribution policy and apply it as an import policy in the [edit protocols ospf] hierarchy
Create a redistribution policy and apply it as an import or an export policy in the [edit protocols ospf]
hierarchy.
Create a redistribution policy and apply it as an export policy in the [edit protocols ospf] hierarchy.
Q17. Which three statements correctly describe IBGP and EBGP interaction? (Choose 1 điểm
three.)
IBGP is used within an AS, whereas EBGP is used between two different ASs.
EBGP peering is normally loopback-based to provide tolerance for interface or link failures.
By default, EBGP updates the next-hop attribute, whereas IBGP does not.
IBGP speakers can re-advertise IBGP-learned or EBGP-learned routes to other IBGP speakers.
EBGP speakers can re-advertise IBGP-learned or EBGP-learned routes to other EBGP speakers.
https://docs.google.com/forms/d/19na_AQE8E96-wV6BbmQy3Wcpz8oqNTaa9qpU9DF1l7Q/edit#responses 8/27
23:23, 28/10/2021 THÔNG TIN CƠ BẢN
Q18. Which statement describes the role of local preference in the BGP route selection 1 điểm
process?
Local preference is evaluated early in the BGP route selection process and results in the route with
the highest numerical local preference being selected.
Local preference is evaluated early in the BGP route selection process and results in the route with
the lowest numerical local preference being selected.
Local preference is used to break ties when all other received BGP attributes are otherwise equal.
Local preference is sent by an EBGP speaker to a neighboring AS in an attempt to influence how the
remote peer's traffic will ingress into your network.
Q19. Which three BGP attributes are used for loop prevention? (Choose three.) 1 điểm
AS path
originator ID
next hop
cluster list
origin
https://docs.google.com/forms/d/19na_AQE8E96-wV6BbmQy3Wcpz8oqNTaa9qpU9DF1l7Q/edit#responses 9/27
23:23, 28/10/2021 THÔNG TIN CƠ BẢN
Q20. You are asked to configure a new external BGP peering. You have configured BGP 1 điểm
on R1 as shown in the exhibit, however the BGP peering remains in Active state. Which
additional configuration is required on R1 to establish the BGP peering?
Q21. You are attempting to influence return traffic into your autonomous system by 1 điểm
preferring one router as an entry point. Which two BGP attributes will affect this
behavior? (Choose two.)
originator ID
local preference
AS path
MED
https://docs.google.com/forms/d/19na_AQE8E96-wV6BbmQy3Wcpz8oqNTaa9qpU9DF1l7Q/edit#responses 10/27
23:23, 28/10/2021 THÔNG TIN CƠ BẢN
Q22. Which three BGP attributes must be sent to EBGP peers? (Choose three.) 1 điểm
local preference
atomic aggregator
origin
next hop
AS path
Q23. You are troubleshooting a BGP-learned prefix that is not being installed in the 1 điểm
routing table. Which command shows you the missing route?
Q24. You are asked to configure a new external BGP connection to a peer's loopback 1 điểm
interface. You verify that the peer's loopback interface is reachable, but the BGP
connection remains in Idle state. Which BGP parameter is required to establish the BGP
connection?
multipath
multihop
as-override
advertise-inactive
https://docs.google.com/forms/d/19na_AQE8E96-wV6BbmQy3Wcpz8oqNTaa9qpU9DF1l7Q/edit#responses 11/27
23:23, 28/10/2021 THÔNG TIN CƠ BẢN
Q25. Your router has an external peering session to 10.10.25.5 and several internal peers. 1 điểm
However, routes learned from EBGP peers are showing up in a hidden state on IBGP
peers. Where would you apply the policy shown in the exhibit to solve this issue?
Q26. Which statement is correct about the inet.3 routing table? 1 điểm
MPLS creates a copy of the mpls.0 table and stores it in the inet.3 routing table.
The inet.3 routing table is used by transit routers to identify label values
BGP can use the inet.3 routing table to resolve next hops.
https://docs.google.com/forms/d/19na_AQE8E96-wV6BbmQy3Wcpz8oqNTaa9qpU9DF1l7Q/edit#responses 12/27
23:23, 28/10/2021 THÔNG TIN CƠ BẢN
Q27. Which two statements are correct about default MPLS behavior on Junos devices? 1 điểm
(Choose two.)
Q28. Which two statements regarding the MPLS label information base are correct? 1 điểm
(Choose two.)
The label information base is used by all LSRs to forward LSP traffic.
The label information base is used by transit LSRs to forward LSP traffic.
Q29. Which two statements are correct about RSVP path messages? (Choose two.) 1 điểm
https://docs.google.com/forms/d/19na_AQE8E96-wV6BbmQy3Wcpz8oqNTaa9qpU9DF1l7Q/edit#responses 13/27
23:23, 28/10/2021 THÔNG TIN CƠ BẢN
Q30. Which two statements are correct regarding LDP-signaled VPLS instances? 1 điểm
(Choose two.)
You must define all neighbors using their tunnel end-point IP addresses.
Q31. Which two statements are correct regarding LDP-signaled Layer 2 circuits? (Choose 1 điểm
two.)
You must specify the neighbor using the tunnel end-point IP address.
Q32. Which two statements regarding VRF tables are correct? (Choose two.) 1 điểm
A PE router's VRF table stores routes received from directly connected CE devices.
A PE router's VRF table stores routes received from its IGP from remote PE devices.
A PE router's VRF table stores routes received from MP-BGP from remote PE devices.
A PE router's VRF table stores routes received from all P and PE devices within the same AS.
https://docs.google.com/forms/d/19na_AQE8E96-wV6BbmQy3Wcpz8oqNTaa9qpU9DF1l7Q/edit#responses 14/27
23:23, 28/10/2021 THÔNG TIN CƠ BẢN
Q33. You have been asked to implement routing policy on the PE devices in your AS and 1 điểm
to ensure the correct customer routes are installed in the appropriate VRF tables. Which
component should be used as a match condition within your policy?
BGP communities
VLAN IDs
route distinguisher
circuit IDs
Q34. What is the purpose of a route target community in a Layer 3 VPN? 1 điểm
The community value is used to identify routes that should be imported by remote PEs.
The community value is used to determine valid remote devices when signaling a Layer 3 VPN
The community value is used to determine transit devices when signaling a Layer 3 VPN.
Q35. You have an established Layer 3 VPN where you are using static routing between 1 điểm
your PE and CE devices. You must advertise their directly connected subnet to remote
PE devices. Which two methods must you use? (Choose two.)
https://docs.google.com/forms/d/19na_AQE8E96-wV6BbmQy3Wcpz8oqNTaa9qpU9DF1l7Q/edit#responses 15/27
23:23, 28/10/2021 THÔNG TIN CƠ BẢN
Q36. You have been asked to verify the state of an LDP-signaled Layer 2 circuit. Which 1 điểm
two commands would you use to verify the state of the connection? (Choose two.)
The wrong BGP address family is enabled for the BGP session.
https://docs.google.com/forms/d/19na_AQE8E96-wV6BbmQy3Wcpz8oqNTaa9qpU9DF1l7Q/edit#responses 16/27
23:23, 28/10/2021 THÔNG TIN CƠ BẢN
224.0.0.18
224.0.0.6
224.0.0.13
224.0.0.22
Q39. Referring to the exhibit, which two statements are true? (Choose two.) 1 điểm
The OSPF neighbor will be declared down if BFD hello packets are not received for 5 seconds
The OSPF neighbor will be declared down if BFD hello packets are not received for 1.5 seconds
The OSPF neighbor will be declared down if 500 BFD hello packets are missed
The OSPF neighbor will be declared down if three BFD hello packets are missed
https://docs.google.com/forms/d/19na_AQE8E96-wV6BbmQy3Wcpz8oqNTaa9qpU9DF1l7Q/edit#responses 17/27
23:23, 28/10/2021 THÔNG TIN CƠ BẢN
Q40. You must establish an MPLS LSP between two locations. You are required to ensure 1 điểm
that the LSP traverses specific routers within the network. Which solution is correct in
this scenario?
Implement RSVP and define the explicit route the LSP must follow
Implement LDP and define the explicit route the LSP must follow
Enable traffic engineering within LDP and define the explicit route the LSP must follow
Enable traffic engineering within RSVP and enable the Fast Reroute feature
https://docs.google.com/forms/d/19na_AQE8E96-wV6BbmQy3Wcpz8oqNTaa9qpU9DF1l7Q/edit#responses 18/27
23:23, 28/10/2021 THÔNG TIN CƠ BẢN
Q41. Referring to the exhibit, which two statements are true? (Choose two.) 1 điểm
The local-address statement is not required for the BGP session to establish correctly
The local-address statement is required for the BGP session to establish correctly
https://docs.google.com/forms/d/19na_AQE8E96-wV6BbmQy3Wcpz8oqNTaa9qpU9DF1l7Q/edit#responses 19/27
23:23, 28/10/2021 THÔNG TIN CƠ BẢN
When you want to bypass a penultimate router that does not support IPv6 tunneling
When you want to ensure the penultimate router can perform the destination route lookup
When you want to enforce the same class-of-service behavior through the entire LSP
When you want to utilize a penultimate router that supports IPv6 tunneling
Q43. You are configuring an IBGP group. When you commit your configuration, you 1 điểm
receive the error shown in the exhibit. Which additional configuration parameter must
you add to your configuration?
multipath
type external
type internal
https://docs.google.com/forms/d/19na_AQE8E96-wV6BbmQy3Wcpz8oqNTaa9qpU9DF1l7Q/edit#responses 20/27
23:23, 28/10/2021 THÔNG TIN CƠ BẢN
sham link
virtual link
route redistribution
https://docs.google.com/forms/d/19na_AQE8E96-wV6BbmQy3Wcpz8oqNTaa9qpU9DF1l7Q/edit#responses 21/27
23:23, 28/10/2021 THÔNG TIN CƠ BẢN
Q45. Referring to the exhibit, which OSPFv3 configuration is implemented on router R1? 1 điểm
A. set protocols ospf3 area 0.0.0.0 interface ge-0/0/0.0 set protocols ospf3 area 0.0.0.1 interface ge-
0/0/1.0 set protocols ospf3 area 0.0.0.1 interface ge-0/0/0.0
B. set protocols ospf3 area 0.0.0.0 interface ge-0/0/0.0 set protocols ospf3 area 0.0.0.1 interface ge-
0/0/1.0 set protocols ospf3 area 0.0.0.1 virtual-link neighbor-id 172.16.1.2
C. set protocols ospf3 area 0.0.0.0 interface ge-0/0/0.0 set protocols ospf3 area 0.0.0.1 interface ge-
0/0/1.0 set protocols ospf3 area 0.0.0.1 interface ge-0/0/0.0 secondary
D. set protocols ospf3 area 0.0.0.0 interface ge-0/0/0.0 set protocols ospf3 area 0.0.0.1 interface ge-
0/0/1.0 set protocols ospf3 area 0.0.0.1 interface ge-0/0/0.0 interface-type p2p
https://docs.google.com/forms/d/19na_AQE8E96-wV6BbmQy3Wcpz8oqNTaa9qpU9DF1l7Q/edit#responses 22/27
23:23, 28/10/2021 THÔNG TIN CƠ BẢN
Q46. What is the purpose of the cluster-list attribute within a BGP route reflector group? 1 điểm
to define the router that first advertised the route to the route reflector
https://docs.google.com/forms/d/19na_AQE8E96-wV6BbmQy3Wcpz8oqNTaa9qpU9DF1l7Q/edit#responses 23/27
23:23, 28/10/2021 THÔNG TIN CƠ BẢN
Q47. You are providing camer-of-carner VPN services for AS 100 and AS 200 You want 1 điểm
to distribute MPLS labels between your PE routers and the AS 100 and AS 200 CE
routers. What must be enabled to accomplish this task?
https://docs.google.com/forms/d/19na_AQE8E96-wV6BbmQy3Wcpz8oqNTaa9qpU9DF1l7Q/edit#responses 24/27
23:23, 28/10/2021 THÔNG TIN CƠ BẢN
Q48. Referring to the exhibit, hosts in Site 1 and Site 2 are unable to communicate with 1 điểm
https://docs.google.com/forms/d/19na_AQE8E96-wV6BbmQy3Wcpz8oqNTaa9qpU9DF1l7Q/edit#responses 25/27
23:23, 28/10/2021 THÔNG TIN CƠ BẢN
Q49. Which two statements regarding the output shown in the exhibit are correct? 1 điểm
(Choose two.) *
https://docs.google.com/forms/d/19na_AQE8E96-wV6BbmQy3Wcpz8oqNTaa9qpU9DF1l7Q/edit#responses 26/27
23:23, 28/10/2021 THÔNG TIN CƠ BẢN
Q50.You are creating a new LDP signaled Layer 2 circuit between three customer sites.In 1 điểm
this scenario, which two statements are correct? (Choose two.)
A. BGP is used to exchange the virtual circuit labels with other PEs.
B. You are allowed to tunnel your LDP sessions through RSVP LSPs.
C. You are not allowed to use any RSVP-signaled LSPs in your core network.
D. LDP is used to exchange the virtual circuit labels with other PEs.
Biểu mẫu
https://docs.google.com/forms/d/19na_AQE8E96-wV6BbmQy3Wcpz8oqNTaa9qpU9DF1l7Q/edit#responses 27/27