Professional Documents
Culture Documents
Answer: D
Explanation
Explanation:
https://sites.google.com/site/amitsciscozone/home/juniper-junos/junos--ospf-designated-router
QUESTION 2
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
A. The BGP peering between R1 and R4 should use loopback interface addresses
B. The BGP peering between R1 and R4 should use physical interface addresses
C. The BGP peerings between R1, R2, and R3 should use loopback interface addresses
D. The BGP peerings between R1, R2, and R3 should use physical interface addresses
Answer: BC
Explanation
QUESTION 3
Click the Exhibit button.
Referring to the exhibit, which statement about the IS-IS interface is true?
Answer: A
Explanation
QUESTION 4
Click the Exhibit button.
Referring to the exhibit, why is the route hidden?
A. The wrong BGP address family is enabled for the BGP session
B. The route has yet to be verified
C. The protocol next hop is not reachable
D. The MPLS LSP to the 192.168.0.2 peer is down
Answer: C
Explanation
QUESTION 5
Click the Exhibit button.
A. The router will attempt to signal the LSP along the IGP shortest path to 192.168.100.1
B. The router will prune links with insufficient bandwidth from the path before beginning the signaling process
C. The router will analyze the traffic engineering database to determine the best path through the network
D. The router will precalculate a valid path through the network for LSP r1- to-r3
Answer: B
Explanation
QUESTION 6
Which two statements are true for GRE tunneling? (Choose two.)
A. GRE tunnel endpoints must have a valid route to the remote endpoint
B. GRE tunnels support multiple logical units per interface
C. GRE tunnels are stateful by default
D. GRE tunnels support only one logical unit per interface
Answer: AB
Explanation
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/filtering-unicast-packets-multicast-tunnel-interfaces.html#id-configuring-unicast- tunnels
QUESTION 7
Click the Exhibit button.
Referring to the exhibit, the GRE tunnel between R-1 and R-2 allows connectivity between User-1 and Server-1. When User-1 communicates with Server-2 with
packets that are 1472 bytes in size, no packet fragmentation occurs. User-1 can communicate with Server-1 with packets that are up to 1448 bytes in size with no
packet fragmentation. However, if the packet size is larger than 1448 bytes, packet fragmentation occurs.
Why is the packet fragmentation occurring between User-1 and Server-1 in this scenario?
Answer: B
Explanation
QUESTION 8
What happens when a packet matches a static route with the next hop parameter set to reject?
Answer: C
Explanation
Explanation:
https://www.informit.com/articles/article.aspx?p=30666&seqNum=5
QUESTION 9
Which two statements are correct about the BGP MED attribute? (Choose two.)
A. BGP uses the MED value when peering to two or more connections to the same upstream AS
B. BGP routes require the MED attribute be defined
C. BGP uses the MED value when peering to two different upstream ASs
D. BGP assumes the MED value to be 0, if not already defined
Answer: AD
Explanation
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html
QUESTION 10
What is the Junos default router priority advertisement value for IS-IS?
A. 64
B. 32
C. 0
D. 127
Answer: A
Explanation
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/concept/routing-protocol-is-is-security-designated-router- understanding.html#:~:text=If%20routers%20in
%20the%20network,a%20priority%20value%20of%2064.
QUESTION 11
Which three attributes are well-known mandatory BGP attributes? (Choose three.)
A. next-hop
B. AS path
C. local preference
D. MED
E. origin
Answer: ABE
Explanation
Explanation:
https://www.kwtrain.com/blog/bgp-pt2
QUESTION 12
Click the Exhibit button.
Answer: D
Explanation
QUESTION 13
Click the Exhibit button.
You have configured IPv6 over IPv4 tunneling, as shown in the exhibit. However, hosts connected to network 2001:0:0:1::0/64 cannot communicate with hosts on
network 2001:0:0:2::0/64. The router R2 has a similar configuration as the R1 router.
QUESTION 14
In a stateless IPv6 auto-configuration scenario, what is the host's IPv6 address if the interface's MAC address is 12:34:ab:cd:ef:56?
A. fe80::1234:abff:fecd:ef56/64
B. fe8::1234:abff:fecd:ef56/64
C. fec0::1234:abff:fecd:ef56/64
D. fe80::1234:abcd:ef56/64
Answer: D
Explanation
QUESTION 15
Click the Exhibit button.
Referring to the exhibit, which two statements are correct? (Choose two.)
A. The router will install the 0.0.0.0/0 route into the routing table when no BGP prefixes are present
B. The router will remove the 0.0.0.0/0 route from the routing table when no BGP prefixes are present
C. The router will remove the 0.0.0.0/0 route from the routing table when any BGP prefixes are present
D. The router will install the 0.0.0.0/0 route into the routing table when any BGP prefixes are present
Answer: BD
Explanation
QUESTION 16
Click the Exhibit button.
Both configuration hierarchies shown in the exhibit have been committed to your MX Series device.
A. Traffic destined to 10.3.0.1 will use the R1-to-R6 LSP as a next hop
B. Traffic destined to 10.3.0.1 will not use the R1-to-R6 LSP as a next hop
C. The active 10.3.0.0/24 prefix installed in the route table will have a route preference of 5
D. The active 10.3.0.0/24 prefix installed in the route table will have a route preference of 7
Answer: AD
Explanation
QUESTION 17
You are asked to change the default TTL handling behavior on your Junos device to ensure that the RSVP-signaled LSPs in your MPLS network cannot be
mapped.
A. Configure the no-decrement-ttl parameter for each LSP on the ingress device
B. Configure the no-propagate-ttl parameter for each LSP on the egress device
C. Configure the no-propagate-ttl parameter for each LSP on the ingress device
D. Configure the no-decrement-ttl parameter for each LSP on the egress device
Answer: B
Explanation
QUESTION 18
Which action would you use to connect two virtual switches that are configured on the same router?
Answer: B
Explanation
QUESTION 19
Which two functions are performed by the OSPF designated router? (Choose two.)
Answer: AC
Explanation
Explanation:
https://sites.google.com/site/amitsciscozone/home/juniper-junos/junos--ospf-designated-router
QUESTION 20
The IPv6 Neighbor Discovery Protocol (NDP) performs the same function as which two IPv4 protocols? (Choose two.)
A. ICMP
B. ARP
C. DNS
D. DHCP
Answer: AB
Explanation
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/ipv6-neighbor-discovery.html#:~:text=Neighbor%20discovery%20for%20IPv6% 20replaces,Discovery
%20protocol%20(NDP)%20messages.
QUESTION 21
Which two statements are true about IP and GRE tunnels? (Choose two.)
Answer: CD
Explanation
QUESTION 22
Which two IP addresses are considered Martian addresses? (Choose two.)
A. 0.0.0.0/8
B. 192.168.0.0/8
C. 240.0.0.0/4
D. 169.254.0.0/16
Answer: AC
Explanation
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/recognize-martian-addr-routing.html
QUESTION 23
Click the Exhibit button.
A. R2 is an ASBR
B. R1 is a backbone router
C. R2 is an ABR
D. R1 is an ABR
Answer: C
Explanation
QUESTION 24
Click the Exhibit button.
Answer: B
Explanation
QUESTION 25
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
A. The OSPF neighbor will be declared down if BFD hello packets are not received for 1.5 seconds
B. The OSPF neighbor will be declared down if BFD hello packets are not received for 5 seconds
C. The OSPF neighbor will be declared down if 500 BFD hello packets are missed
D. The OSPF neighbor will be declared down if three BFD hello packets are missed
Answer: AD
Explanation
QUESTION 26
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
Answer: BD
Explanation
QUESTION 27
What is the correct description of an Area Border Router (ABR)?
A. An ABR is an OSPF router with links in two areas, connecting OSPF areas to the backbone
B. An ABR is an OSPF router that injects routing information from outside the OSPF AS
C. An ABR is an OSPF router with at least one link in a Layer 2 area
D. An ABR is an OSPF router with all of its links within an area
Answer: A
Explanation
QUESTION 28
Click the Exhibit button.
You are configuring an IBGP group. When you commit your configuration, you receive the error shown in the exhibit.
A. multipath
B. type external
C. type internal
D. export <policy name>
Answer: C
Explanation
QUESTION 29
Click the Exhibit button.
You are troubleshooting a new BGP peering session which is not establishing.
Answer: C
Explanation
QUESTION 30
Click the Exhibit button.
You must create a static route on Router-A to the 10.10.5.0/24 network using 10.10.3.2 as the next hop.
B.
C.
D.
Answer: D
Explanation
QUESTION 31
Which two statements describe operations performed by the encapsulating tunnel endpoint in an IP-IP tunnel? (Choose two.)
Answer: AC
Explanation
QUESTION 32
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
Answer: CD
Explanation
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/local-address-edit-protocols- bgp.html
QUESTION 33
Which MPLS feature works with Constrained Shortest Path First (CSPF) to protect against the primary and secondary paths using the same link?
A. fate-sharing
B. explicit null configuration
C. policy control over LSP selection
D. LSP metrics
Answer: A
Explanation
QUESTION 34
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
A. Routes from 10.1.1.1 are more preferred than routes from 10.2.2.2
B. Routes from 10.2.2.2 are less preferred than the default local preference
C. Routes from 10.3.3.3 are more preferred than the default local preference
D. Routes from 10.2.2.2 are less preferred than routes from 10.3.3.3
Answer: C
Explanation
QUESTION 35
You want to disable MAC learning only for interface ge-0/0/0.0 on an MX Series device.
A.
B.
C.
D.
Answer: C
Explanation
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/layer-2-services-mac-bridge-domain-or-logical-interface-disabling-learning- for.html
QUESTION 36
You must establish an MPLS LSP between two locations. You are required to ensure that the LSP traverses specific routers within the network.
A. Enable traffic engineering within RSVP and enable the Fast Reroute feature
B. Implement RSVP and define the explicit route the LSP must follow
C. Implement LDP and define the explicit route the LSP must follow
D. Enable traffic engineering within LDP and define the explicit route the LSP must follow
Answer: B
Explanation
QUESTION 37
You are deploying an RSVP-based MPLS network in your core. You must ensure that your LSPs are continually analyzing the usage levels and recalculating the
best LSP. You also want to ensure that a minimal amount of traffic is lost when an LSP is re-signaled without user intervention.
A. adaptive
B. MPLS fast reroute
C. class of service
D. auto-bandwidth
Answer: BD
Explanation
QUESTION 38
Click the Exhibit button.
Your co-worker configures the ge-0/0/0 interface with an IPv6 address of 2001:db8:0:9::/64. After committing the configuration, your co-worker executes the
command shown in the exhibit.
Answer: D
Explanation
QUESTION 39
Which two statements are true when considering logical systems? (Choose two.)
Answer: CD
Explanation
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-logical-systems-for-routers-and-switches.html
QUESTION 40
Which two high availability features preserve interface and kernel information during reconvergence? (Choose two.)
Answer: CD
Explanation
QUESTION 41
To which multicast address is a VRRP advertisement packet sent?
A. 224.0.0.6
B. 224.0.0.18
C. 224.0.0.22
D. 224.0.0.13
Answer: B
Explanation
Explanation:
https://tools.ietf.org/html/rfc3768
QUESTION 42
Which RSVP object allows LSRs to influence path selection?
Answer: D
Explanation
QUESTION 43
In which situation would you disable penultimate-hop popping?
A. When you want to bypass a penultimate router that does not support IPv6 tunneling
B. When you want to ensure the penultimate router can perform the destination route lookup
C. When you want to enforce the same class-of-service behavior through the entire LSP
D. When you want to utilize a penultimate router that supports IPv6 tunneling
Answer: C
Explanation
QUESTION 44
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
Answer: B
Explanation
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/configuring-ospf-areas.html#id-example-controlling-ospf-designated-router- election
QUESTION 45
You have two MX Series devices connected together and configured for Layer 2 operations. The interface that connects the two routers must carry tagged and
untagged traffic.
A. Configure the interfaces as access ports with the native VLAN option
B. Configure the interfaces as trunk ports with the native VLAN option
C. Configure the interfaces as access ports with the voice VLAN option
D. Configure the interfaces as trunk ports with the voice VLAN option
Answer: B
Explanation
QUESTION 46
Which two statements are true about IBGP on MX Series devices? (Choose two.)
Answer: AD
Explanation
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/bgp-ibgp-peering.html
QUESTION 47
According to Juniper Networks, what are two reasons to peer using loopback addresses when configuring BGP? (Choose two.)
Answer: AC
Explanation
QUESTION 48
Click the Exhibit button.
Referring to the exhibit, if there is a connection failure between router1 and router2, how much time will pass before the devices declare the BFD session dead?
A. 1200 ms
B. 300 ms
C. 600 ms
D. 900 ms
Answer: D
Explanation
QUESTION 49
Click the Exhibit button.
You have applied the policy shown in the exhibit to the forwarding table on an MX Series device.
A. per frame
B. per packet
C. per segment
D. per flow
Answer: B
Explanation
QUESTION 50
Click the Exhibit button.
Customer-1 wants the Service Provider to allow STP to operate normally on all ports but only allow the MX Series devices to manage the Layer 2 topology.
Referring to the exhibit, which feature needs to be implemented on all devices to accomplish this task?
A. root protection
B. MAC movement protection
C. BPDU protection
D. loop protection
Answer: D
Explanation
QUESTION 51
Click the Exhibit button.
A. Routes from 10.1.1.1 are less preferred than the default local preference
B. Routes from 10.2.2.2 are less preferred than routes from 10.1.1.1
C. Routes from 10.3.3.3 are less preferred than the default local preference
D. Routes from 10.1.1.1 are less preferred than routes from 10.2.2.2
Answer: B
Explanation
QUESTION 52
Click the Exhibit button.
Referring to the exhibit, how many milliseconds must pass before the interface ge-0/0/1.0 is considered down?
A. 1200 ms
B. 900 ms
C. 1600 ms
D. 2400 ms
Answer: A
Explanation
QUESTION 53
When working with an MPLS LSP, what will the install 172.16.6.0/24 active command accomplish?
Answer: D
Explanation
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/lsp-routes.html#id-21214
QUESTION 54
Click the Exhibit button.
22
In the network shown in the exhibit, all switches are configured with the default STP root bridge priority, and Switch A has been selected as root. You recently
added the older Switch D into the network as an access switch, and notice it has taken over as root.
A.
B.
C.
D.
Answer: C
Explanation
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/no-root-port-edit-protocols- stp.html
QUESTION 55
Which statement is true when using MVRP on MX Series devices?
Answer: A
Explanation
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/mvrp.html
QUESTION 56
Which two characteristics describe IS-IS? (Choose two.)
Answer: BC
Explanation
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/concept/isis-levels-understanding.html
QUESTION 57
Click the Exhibit button.
A. stub area
B. totally stubby area
C. not-so-stubby area
D. backbone area
Answer: A
Explanation
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/configuring-ospf-areas.html
QUESTION 58
Which IPv6 extension header notifies intermediary devices that they must inspect the packet's options?
Answer: B
Explanation
Explanation:
https://en.wikipedia.org/wiki/IPv6_packet
QUESTION 59
What is the purpose of STP BPDUs?
Answer: B
Explanation
QUESTION 60
Click the Exhibit button.
You configured R1 and R2 to form an OSPF adjacency, but the adjacency will not establish.
Answer: C
Explanation
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/router-id-edit-routing- options.html
QUESTION 61
Click the Exhibit button.
Referring to the exhibit what are two reasons for the configuration stanza? (Choose two.)
Answer: AB
Explanation
QUESTION 62
Which statement about a virtual-router type of routing instance is correct?
Answer: D
Explanation
QUESTION 63
You want to make use of the nonstop active routing (NSR) feature.
A. IP anycast
B. graceful restart
C. Virtual Router Redundancy Protocol
D. graceful Routing Engine switchover
Answer: D
Explanation
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/concept/nsr-overview.html
QUESTION 64
Click the Exhibit button.
Answer: A
Explanation
QUESTION 65
Which two routing protocols make use of a designated router, or pseudo node, to represent a broadcast network? (Choose two.)
A. BGP
B. OSPF
C. MPLS
D. IS-IS
Answer: BD
Explanation
QUESTION 66
Click the exhibit.
29
Referring to the exhibit, which configuration must be set on R2 to from a Level 1 IS-IS adjacency with R1?
Answer: A
Explanation
QUESTION 67
A customer pays for the bandwidth on a per-packet basis. The network administrator wants to constrain costs and prevent Layer 2 loops on a multihomed Layer 2
WAN network.
Answer: C
Explanation
QUESTION 68
You asked to deploy a large-scale IS-IS network with multiple areas.
A. The area IDs must be the same for Level 2 routers to from an adjacency.
B. Level1 routers can from an adjacency with any other Level 1 router.
C. Level1 routers can from an adjacency with any other Level 2 router.
D. The area IDs must be the same for Level1 routers to from an adjacency.
Answer: BD
Explanation
QUESTION 69
You are establishing RSVP LSPs through your MPLS-enabled network. You are asked to ensure that the LSPs will support end-to-end class-of-service handling.
Answer: C
Explanation
QUESTION 70
Click the Exhibit.
Referring to the exhibit, which IS-IS router will be selected as the DIS?
A. Router 1
B. Router 4
C. Router 2
D. Router 3
Answer: B
Explanation
QUESTION 71
You are using RSVP to signal an MPLS LSP.
Answer: A
Explanation
QUESTION 72
What is the correct simplification of the 2001:0000:0000:0234F:0000:CBFF:5CA1:A001 IPv6 address?
A. 2001::234F:0 :CBFF:5CA1:A001
B. 2001:0:0:234F:0:CBFF:5CA1:A1
C. 2001::234F:CBFF:5CA1:A001 D.
2001::234F::CBFF:5CA1:A001
Answer: A
Explanation
QUESTION 73
Which two statements are correct about default BGP route propagation? (Choose two.)
Answer: BC
Explanation
QUESTION 74
You must configure an MX Series device to receive and forward a mixture of single-tag and dual-tag frames on interface xe-0/0/0.
A. xe-0/0/0 {flexible-vlan-tagging;}
B. xe-0/0/0 {stacked-vlan-tagging;}
C. xe-0/0/0 {vlan-vci-tagging;}
D. xe-0/0/0 {vlan-tagging;}
Answer: A
Explanation
QUESTION 75
Click the Exhibit.
Your router has an external peering session to 10.10.25.5 and several internal peers. However, routes learned from EBGP peers are showing up in a hidden state
on IBGP peers.
Where would you apply the policy shown in the exhibit to solve this issue?
Answer: C
Explanation
QUESTION 76
An IS-IS TLV includes which two attributes? (Choose two.)
A. Topology
B. Vector
C. Length
D. Value
Answer: CD
Explanation
QUESTION 77
Click the Exhibit.
32
Referring to the exhibit, the GRE tunnel between R-1 and R2 allows connectivity between User-1 and Server-1. User-1 can communicate with Server-1 with
packets that are up to 1448 bytes in size.
However, if the packet size is larger than 1448, User-1 cannot communicate with Server-1.
A. Change the physical MTU on the ge-0/0/3 interfaces on R-1 and R-2 to 1448 bytes.
B. Change the physical MTU on the gr-0/0/0 interfaces on R-1 and R-2 to 1448 bytes.
C. Apply the allow-fragmentation statement to the GRE tunnel configuration.
D. Apply the path-mtu-discovery statement to the GRE tunnel configuration.
Answer: C
Explanation
QUESTION 78
Click the Exhibit.
Referring to the exhibit, which two statements are true? (Choose two.)
Answer: AC
Explanation
QUESTION 79
What are two valid next-hop types that would be configured for a static route? (Choose two.)
Answer: AB
Explanation
QUESTION 80
Click the Exhibit.
Referring to the exhibit, which statement is correct about MVRP?
Answer: B
Explanation
QUESTION 81
Click the Exhibit.
A. The next-hop 172.16.1.2 must be directly connected to the router for route 192.168.5.0/24 to be active.
B. The next-hop 172.16.1.2 must be part of an active route in route table inet.0 for route 192.168.5.0/24 to be active.
C. The next-hop 172.16.1.2 must respond to ping commands for the route 192.168.5.0/24 to be active.
D. The next-hop 172.16.1.2 must be active in route table inet.3 for the route 192.168.5.0/24 to be active.
Answer: B
Explanation
QUESTION 82
Which standards-based election protocol facilities redundancy in a LAN environment by eliminating a single point failure through the use of master and backup
routers?
A. VRRP
B. BFD
C. graceful restart
D. ISSU
Answer: A
Explanation
QUESTION 83
Click the Exhibit.
36
By default, at which router will the implicit null (Label3) action take place for LSP shown in the exhibit?
A. R4
B. R2
C. R1
D. R3
Answer: D
Explanation
QUESTION 84
Click the Exhibit. You are receiving the same route prefix from four EBGP neighbors.
Based on the information provided in the exhibit, which route will be selected?
A. Route 4
B. Route 1
C. Route 2
D. Route 3
Answer: D
Explanation
QUESTION 85
Which statement is true regarding default MPLS label handling?
A. A router that pops a label from a label stack always pushes a new label on the packet
B. A router that pops a label from a label stack forwards a frame based on the label that was popped.
C. A router that pops a label from a label stack forwards a frame based on the underlying destination IP address.
D. A router that pops a label from a label stack applies class of service based on the IP header to ToS bits.
Answer: C
Explanation
QUESTION 86
Which two statements are true about VRRP? (Choose two.)
Answer: CD
Explanation
QUESTION 87
Which statement is true about GRE encapsulation?
Answer: B
Explanation
QUESTION 88
What are three label operations that an MPLS-enabled router performs? (Choose three.)
A. swap
B. push
C. pop
D. insert
E. rewrite
Answer: ABC
Explanation
QUESTION 89
Click the Exhibit.
You are planning the addition of a new EX3400 Series device to the network (EX-3400-7) to service MSTI-1 and MSTI-2.
Referring to the exhibit, which requirement must be met on EX-3400-7 for the MSTP instances to become fully operational and resilient?
Answer: C
Explanation
QUESTION 90
Click the exhibit.
38
You have configured OSPF between two routers. The OSPF adjacency will not form.
Answer: D
Explanation
QUESTION 91
Which statement is true when using VLANs in a bridge domain on an MX Series device?
Answer: C
Explanation
QUESTION 92
Which two statements are true about NSR? (Choose two.)
Answer: BD
Explanation
QUESTION 93
What are tree types of interfaces that can be used in an MX Series device when implementing a virtual switch routing instance? (Choose three.)
A. Trunk interface
B. Access interface
C. Layer 2 logical interface
D. GRE tunnel interface
E. Logical tunnel interface
Answer: ABC
Explanation
QUESTION 94
You are asked to configure and apply a new routing policy to influence routing advertisements received from a specific EBGP peer.
In this scenario, which statement is true?
A. The new policy should be applied as an export policy for the specific EBGP peer.
B. The new policy should be applied as an import policy for the specific EBGP peer.
C. The new policy should be applied as an export for the EBGP group in which the peer is defined.
D. The new policy should be applied as an import policy for the EBGP group in which the peer is defined.
Answer: B
Explanation
QUESTION 95
Which statement correctly describes a characteristic of IPv6 unicast addressing?
Answer: B
Explanation
QUESTION 96
What is required on the egress and ingress devices to transport IPv6 traffic across an IPv4 network?
A. An IP-IP interface
B. A TE tunnel interface
C. A GRE tunnel interface
D. A 6to 4 tunnel interface
Answer: C
Explanation
QUESTION 97
Click the Exhibit.
Referring to the exhibit, what is the correct OSPF interface state for the ge-0/0/1 interface?
A. BDR
B. Down
C. DR
D. DRother
Answer: C
Explanation
QUESTION 98
Click the exhibit.
40
You are asked to enable a new BGP connection on R1, which has an existing IPv4 peering with R2. The new peering with R3 will use IPv6.
Referring to the exhibit, which two steps are required to enable the new IPv6 peering? (Choose two.)
Answer: AC
Explanation
QUESTION 99
Which two fields of a hello packet must match on both routers when forming an OSPF adjacency? (Choose two.)
A. Hello interval
B. Designated route
C. Router priority
D. Network mask
Answer: AD
Explanation
QUESTION 100
Click the Exhibit.
You are receiving the same route prefix from four EBGP neighbors.
Based on the information provided in the exhibit, which route will become active?
A. Route2
B. Route3
C. Route4
D. Route1
Answer: D
Explanation
QUESTION 101
Click the Exhibit.
You have just configured IS-IS, but the adjacency is not coming up.
Answer: A
Explanation
QUESTION 102
Click the Exhibit.
You have just configured a GRE tunnel, but you notice that the GRE tunnel is flapping.
Referring to the exhibit, which two would you take to solve this problem? (Choose
two.)
A. Add a specific static route to the local peer's network with the remote devices'loopback address as the next-hop gateway.
B. Add a specific route to the remote device's loopback address with the next-hop device defined as the next-hop gateway.
C. Set the GRE interface with a larger TTL value.
D. Remove the existing 192.168.2.0/30 static route.
Answer: BD
Explanation
QUESTION 103
You want to save adjacency formation time between two routers participating in OSPF, as well as reduce the size of the OSPF link-state database.
Answer: D
Explanation
QUESTION 104
What is the TTL value for EBGP?
A. 64
B. 48
C. 255
D. 1
Answer: D
Explanation
QUESTION 105
Which statement is true about routing instances on Junos devices?
Answer: D
Explanation
QUESTION 106
Click the Exhibit.
The router with the configuration shown in the exhibit has two interfaces, both of which are operational and can pass traffic. These interfaces are connected to two
different routers, both of which are configured for OSPF area 0.0.0.1. The router has received LSAs and can now send traffic into the backbone area.
Answer: BC
Explanation
QUESTION 107
Click the exhibit.
A customer has two VLANs to extend between Site-1 and Site-2. The customer does not want to route the VLANs or renumber the VLANs.
Referring to the exhibit, which two VLAN IDs are egressing the MX Series device towards the optical transport network after translation? (Choose two.) A.
500
B. 501
C. 201
D. 200
Answer: AB
Explanation
QUESTION 108
Which three statements are true about GRES? (Choose three.)
Answer: ABD
Explanation
QUESTION 109
Click the Exhibit.
Answer: C
Explanation
QUESTION 110
Click the Exhibit button. An interface is configured as shown in the exhibit. What must also be configured for this interface to participate in VLAN 100 and 200?
A. broadcast domains
B. VLANs
C. bridge domains
D. encapsulation type
Answer: C
Explanation
QUESTION 111
An Ethernet bridge is configured such that all interfaces are in a single broadcast domain By default. Which two tasks does the bridge perform in response to
receiving a multicast frame? (Choose two)
Answer: AC
Explanation
QUESTION 112
Which configuration can be applied to ensure that no more than 600 MAC addresses are learned by a virtual switch?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: B
Explanation
QUESTION 113
You are logged into a PE router participating in a Layer 3 VPN as defined in RFC 4364. You would like to ping the remotely connected CE router's loopback
address. The address of the loopback is 122.161.2.1, the VPN routing-instance is called VPN-C.Which command will accomplish this goal?
Answer: B
Explanation
QUESTION 114
Click the Exhibit button.
You have two routers connected over a Gigabit Ethernet link as shown in the exhibit It is required that an IS-IS adjacency be established without the need for a
designated intermediate system (DIS)
Which configuration statement entered on both routers will achieve this goal?
Answer: D
Explanation
QUESTION 115
Which two problems occur when increasing numbers of users are added to an Ethernet LAN with no switches present? (Choose two.)
Answer: AD
Explanation
QUESTION 116
Click the Exhibit button.In the exhibit, all routers are sending routes to Router B
Answer: D
Explanation
QUESTION 117
Click the Exhibit button. Given the OSPF network topology shown in the exhibit, you would like to inject external (non- OSPF) routes into the network on Router D
Which two OSPF area types will support this configuration? (Choose two)
A. stub area
B. totally stubby area
C. not-so-stubby area
D. non-backbone area
Answer: CD
Explanation
QUESTION 118
In your network, you have two LDP routers connected across four physical interfaces. You have also enabled LDP to operate on all four of those interfaces. What
is the resulting outcome of your configuration between those two routers?
Answer: B
Explanation
QUESTION 119
By default, which RSVP reservation style is used by the Junos OS?
A. fixed explicit
B. fixed filter
C. shared explicit
D. wildcard filter
Answer: B
Explanation
QUESTION 120
Which three statements are true about BGP? (Choose three)
A. iBGP peering adds value in small networks with a single upstream connection
B. iBGP peering adds value in small networks with multiple upstream connections
C. eBGP peering adds value in small networks with multiple upstream connections
D. iBGP peering adds value in large enterprise environments with multiple upstream connections
E. eBGP peering adds value in large enterprise environments with multiple upstream connections
Answer: CDE
Explanation
QUESTION 121
You observe that VPN routes are hidden on your PE router Which situation accounts for these hidden routes?
Answer: A
Explanation
QUESTION 122
To prevent fragmentation issues across a GRE tunnel, which MTU value is recommended for the tunnel to accommodate most IP packets?
A. 1476
B. 1492
C. 1500
D. 1524
Answer: D
Explanation
QUESTION 123
By default, which three criteria are used by the Junos load-balancing algorithm to determine a traffic flow? (Choose three.)
A. protocol
B. source port
C. destination port
D. source address
E. destination address
Answer: ADE
Explanation
QUESTION 124
Click the Exhibit button. Based on the configuration shown in the exhibit, what will be the state of the IS-IS levels on interface ge-0/0/0.100?
A. Level 1 is enabled and Level 2 is disabled.
B. Level 1 is disabled and Level 2 is enabled.
C. Level 1 is enabled and Level 2 is enabled.
D. Level 1 is disabled and Level 2 is disabled.
Answer: D
Explanation
QUESTION 125
Referring to the exhibit, which firewall filter action(s) will be applied to incoming frames to ge-1/0/3?
Answer: B
Explanation
QUESTION 126
Click the Exhibit button. Given the OSPF topology shown in the exhibit, how many unique link-state databases are present in the network?
A. 1
B. 2
C. 3
D. 6
Answer: C
Explanation
QUESTION 127
Click the Exhibit button. In the exhibit, three IPv6 addresses are listed. Which two statements are true? (Choose two.)
Answer: AC
Explanation
QUESTION 128
You have just configured IPv6 in your network. A packet arrives on your router that exceeds the MTU size. How will an IPv6 router respond?
Answer: C
Explanation
QUESTION 129
Which two statements reflect benefits of performing per-flow load balancing over per-packet load balancing? (Choose two.)
Answer: BC
Explanation
QUESTION 130
By default, the Junos OS advertises which address(es) in LDP forwarding equivalency class (FEC) messages?
Answer: C
Explanation
QUESTION 131
Click the Exhibit button. Two bridge domains are configured as shown in the exhibit.
What must be configured as part of the ge-1/0/3 interface configuration to accept tagged frames of VLANs 100 and 200?
A. encapsulation vlan-bridge
B. encapsulation ethernet-bridge
C. interface-mode trunk
D. vlan-id-range [100 200]
Answer: A
Explanation
QUESTION 132
What are three valid BGP message types? (Choose three.)
A. Refresh
B. Hello
C. Route
D. Keepalive
E. Open
Answer: ADE
Explanation
QUESTION 133
Router A receives two similar route advertisements from different BGP peers.What would cause a route to be selected in this scenario?
Answer: A
Explanation
QUESTION 134
Which two configuration elements must match on all switches participating in the same MSTP region? (Choose two.)
A. mstp-version
B. configuration-name
C. msti-revision
D. revision-level
Answer: BD
Explanation
QUESTION 135
Click the Exhibit button. What does IS-IS/18 mean in the output displayed in the exhibit?
A. These routes are internal Level 1 routes.
B. These routes are internal Level 2 routes.
C. These routes are external Level 1 routes.
D. These routes are external Level 2 routes.
Answer: B
Explanation
QUESTION 136
What are two characteristics of a traditional Ethernet LAN? (Choose two.)
Answer: AC
Explanation
QUESTION 137
You are logged into a PE router participating in a Layer 3 VPN as defined in RFC 4364. You would like to ping the locally connected CE router's interface. The
address of the interface is 192.168.1.1; the VPN routing-instance is named VPN-A.Which command will accomplish this task?
Answer: A
Explanation
QUESTION 138
Click the Exhibit button. From the output shown in the exhibit, what would happen to a packet destined for address 172.29.3.5?
A. The address is not in the aggregate range; the packet is sent to the Routing Engine.
B. The address is in the aggregate range; the packet will be silently dropped.
C. The address is not in the aggregate range; the packet will be forwarded.
D. The address is in the aggregate range; the packet will be dropped.
Answer: D
Explanation
QUESTION 139
Before configuring an RSVP LSP in your network, you first apply a baseline configuration to all of the routers.Which three configuration elements are minimally
required in the baseline? (Choose three.)
Answer: BDE
Explanation
QUESTION 140
Your customer complains that their Layer 3 VPN is not passing traffic from one site to another. You assigned that customer to VPN-A. Which command on the PE
router will confirm the presence of customer routes?
Answer: D
Explanation
QUESTION 141
In an IS-IS network, which device represents the pseudo-node?
Answer: A
Explanation
QUESTION 142
Router B is an OSPF router connected to both Area 0 and Area 2. Area 2 has been configured as a totally stubby area.Which three LSA types does Router B
suppress from Area 2? (Choose Three.)
A. Router LSA
B. Network LSA
C. External LSA
D. Summary LSA
E. ASBR Summary LSA
Answer: CDE
Explanation
QUESTION 143
What is the size of the unique address used to identify each node on an Ethernet LAN?
A. 3 bytes
B. 6 bytes
C. 9 bytes
D. 12 bytes
Answer: B
Explanation
QUESTION 144
Which two IS-IS packet types are used to maintain IS-IS database synchronization? (Choose two.)
A. IIH
B. LSP
C. PSNP
D. CSNP
Answer: CD
Explanation
QUESTION 145
You notice that a route from internal BGP peer 192.168.1.1 is missing from the local route table.Which two commands would be used to help identify the source of
the problem? (Choose two.)
Answer: BC
Explanation
QUESTION 146
What are three ways to configure IPv6 addresses in your network? (Choose three.)
Answer: ABC
Explanation
QUESTION 147
Click the Exhibit button. Which two topologies shown in the exhibit could be implemented without a spanning-tree protocol? (Choose two.)
A. ring
B. tree
C. star
D. mesh
Answer: BC
Explanation
QUESTION 148
Click the Exhibit button. In the exhibit, all routers are sending routes to Router B.Which routes will be advertised from Router B to Router E?
A. BGP routes learned from Router A only
B. BGP routes learned from Router D only
C. BGP routes learned from Routers A and C only
D. BGP routes learned from Routers A, C, and D only
Answer: D
Explanation
QUESTION 149
In your RSVP network you have configured three separate LSPs to the same egress address. You have made no other configuration changes to the forwarding
decisions made by the router.Which commands can you use to determine which LSP is being used to forward packets?
Answer: A
Explanation
QUESTION 150
Which two values are used by an RSTP bridge to remove stale BPDU information? (Choose two.)
A. Message Age
B. Forwarding Delay
C. Hello Time
D. Max Age
Answer: AD
Explanation
QUESTION 151
Click the Exhibit button. After the MAC learning limit of 3000 is reached for the bd bridge domain as shown in the exhibit, what happens to frames that arrive that
contain unknown unicast destination addresses?
Answer: A
Explanation
QUESTION 152
Which two statements are correct regarding TLVs in IS-IS? (Choose two.)
Answer: AC
Explanation
QUESTION 153
Click the Exhibit.
Referring to the exhibit, which route(s) will be exported to neighbor 192.168.1.2?
Answer: B
Explanation
QUESTION 154
Click the Exhibit.
You have configured the IBGP group shown in the exhibit. However, committing your configuration fails.
Which parameter should you add to the IBGP group configuration to correct the problem?
A. Type external
B. Type internal
C. Export <policy name>
D. As -override
Answer: B
Explanation
QUESTION 155
What is the OSPFv3 router ID?
A. 0.0.0.0
B. 192.168.1.1
C. 2001::1:2
D. 2001::192.168.1.1
Answer: B
Explanation
QUESTION 156
What are two methods for decreasing the size of an OSPF link-state database (LSDB)? (Choose two.)
A. Ensure that all routers on a shared segment are configured with a priority value of 0.
B. Use an interface type of p2p when possible.
C. Segment large groups of routers into areas.
D. Change a stub area to NSSA when possible.
Answer: BC
Explanation
QUESTION 157
You are setting up a new IS-IS adjacency between two devices. The new Level1 adjacency is not establishing.
Answer: B
Explanation
QUESTION 158
Because of recent network failures, additional circuits have been purchased. In addition, Fast reroute has been configured on critical MPLS LSPs.
When the next failure occurs, which two time intervals will affect fast reroute? (Choose two.)
A. The amount of time required to reroute the traffic onto the detour
B. The amount of time to detect a link or node failure
C. The amount of time required to recalculate the best detour
D. The amount of time it takes to ping the gateway on the detour link
Answer: AB
Explanation
QUESTION 159
Click the Exhibit.
Answer: D
Explanation
QUESTION 160
Click the Exhibit.
Referring to the configuration in the exhibit, which two statements are true? (Choose two.)
A. The next-hop 172.16.1.2 must respond to ping commands for the route 192.168.5.0/24 to be active.
B. The next-hop 172.16.1.2 must be active in route table inet 3 for the route 192.168.5.0/24 to be active.
C. The next-hop 172.16.1.2 must be part of an active route in route table inet 0 for route 192.168.5.0/24 to be active.
D. The next-hop 172.16.1.2 must be directly connected to the router for route
Answer: CD
Explanation
QUESTION 161
Click the Exhibit.
Referring to the exhibit, R-1 and R-2 are connected with a LAG on the ae0 interface.
However, the LAG is not operational.
Answer: B
Explanation
QUESTION 162
Which two Layer 2 protocols are supported on MX Series devices? (Choose two.)
A. BGP
B. RIP
C. RSTP
D. MSTP
Answer: CD
Explanation
QUESTION 163
Click the exhibit.
In the exhibit, which two routers will perform a swap action on LSP1? (Choose two.)
A. R1
B. R2
C. R4
D. R3
Answer: AB
Explanation
QUESTION 164
Click the Exhibit.
62
Your network consists of subnets shown in the exhibit. You are asked to create an aggregate route for Router 1.
What is the appropriate prefix for the aggregate route in this scenario?
A. 172.42.32.0/20
B. 172.42.32.0/22
C. 172.42.32.0/19
D. 172.42.32.0/21
Answer: C
Explanation
QUESTION 165
What must be configured for all IBGP speakers in an AS to have consistent routing information?
Answer: D
Explanation
QUESTION 166
What are two benefits of using an OSPF designated router (DR)? (Choose two.)
Answer: BD
Explanation
QUESTION 167
Which three statements are true regarding the show system switchover operational mode command? (Choose three.)
Answer: BCE
Explanation
QUESTION 168
You have been asked to use a convention that allows for auto configuration of interface addresses.
You are not allowed to use DHCPv6. What do you do?
Answer: B
Explanation
QUESTION 169
You notice that the RID of your router is being taken from the address of your management interface.
What could cause this scenario?
Answer: C
Explanation
QUESTION 170
You have been asked to identify what the contributing routes are for route 204.7.15/21.Which command will show this information?
Answer: D
Explanation
QUESTION 171
Which packet type does the router use to request up-to-date link-state information?
A. IIH
B. LSP
C. PSNP
D. CSNP
Answer: C
Explanation
QUESTION 172
Which forwarding table designation is used to indicate that load balancing is working correctly?
A. ucst
B. msct
C. ulst
D. mlst
Answer: C
Explanation
QUESTION 173
Which two statements are correct regarding VPLS mesh groups? (Choose two.)
A. Unicast packets destined to another PE router within the same mesh group are dropped by the local PE router.
B. Unicast packets destined to another PE router in a different mesh group are dropped by the local PE router.
C. Broadcast, multicast, and unicast packets of unknown origin received from a PE router are flooded to all local CE routers.
D. Broadcast, multicast, and unicast packets of unknown origin received from a PE router are flooded to all remote PE routers.
Answer: AC
Explanation
QUESTION 174
Which Layer 2 mechanism logically groups network nodes into separate broadcast domains?
A. IS-IS levels
B. OSPF areas
C. VLAN
D. IP subnets
Answer: C
Explanation
QUESTION 175
Which two statements correctly describe the BGP community attribute? (Choose two.)
Answer: CD
Explanation
QUESTION 176
Click the exhibit.
Customer 1 has experienced some hardware failures that erroneously transitioned some links into a forwarding state, as shown in the exhibit. In
this scenario, which STP feature set would solve this problem?
Answer: B
Explanation
QUESTION 177
Click the Exhibit.
65
You are using OSPF as your IGP in your network. You have applied the OSPF configuration shown in the exhibit to router R1.
Which statement is true in this scenario?
Answer: D
Explanation
QUESTION 178
Click the Exhibit.
On an MX Series device, you must enable routing between VLANs 100,200, and the Internet ge-5/1/0, and ge-5/1/2 are bundled into interface ae3. Ge-5/1/4, and
ge-5/1/5 are bundles into interface ae2. Both AE bundles trunk VLANs 100 and 200.
In this scenario, what is the correct configuration snippet for VLAN 100?
A. interfaces {xe-2/1/0 {unit 0{family inter {address 10.0.10.2/24;}}}irb {unit 0{family inet {address 10.0.1.2/24;}}unit 1 family inet {address 10.0.2.2/24;}}}}bridge-
domains {vlan- 100{domain-type bridge;vlan-id 100;interface ge-2/2/2.100;interface ae1.100;interface ae3.100;routing-interface irb.0;}}
B. interfaces {xe-2/1/0{unit 0{family inet {address 10.0.10.2/24;}}}ip-0/0/0{unit 0{family inet {address 10.0.1.2/24;}}unit 1{family inet {address 10.0.2.2/24;}}}}bridge-
domains {vlan- 100{domain-type bridge;vlan-id 100;interface ge-2/2/2.100;interface ae1.100;interface ae3.100;interface ip-0/0/0.0;}}
C. interfaces {xe-2/1/0 {unit 0 {family inet {address 10.0.10.2/24;}}}irb {unit 0{family inet {address 10.0.1.2/24:}}unit 1 {family inet {address
10.0.2.2/24;}}}}bridge- domains {vlan- 100{domain-type bridge;vlan-id 100;interface ge-2/2/2.100;interface ae1.100;interface ae3.100;}}
D. interfaces {xe-2/1/0 {unit 0{family inet {address 10.0.10.2/24;}}}ip-0/0/0 {unit 0 {family inet {address 10.0.1.2/24;}}unit 1 {family inet {address 10.0.2.2/24;}}}}
bridge-domains {vlan- 100{domain-type bridge;vlan-id 100;interface ge-2/2/2.100;interface xe-2/1/0.0;interface ae1.100;interface ae3.100interface ip-
0/0/0.0;}}
Answer: C
Explanation
QUESTION 179
You are configuring a default static route using the default preference value. You want to ensure that any static route that you configure in the future will be less
preferred than the OSPF routes that are configured on the network.
Answer: C
Explanation
QUESTION 180
You have recently configured MSTP on two switches in your network to participate in the same MSTP region. You issue the show spanning-tree mstp configuration
command on both switches and notice that the configuration digests do not match.
What does this mismatch indicate?
A. Everything is functioning as expected because the configuration digests should not match.
B. You should ensure that the max-age and hello timers are equal on both switches.
C. You should ensure that the bridge IDs and priority values are unique on both switches.
D. You should ensure that the MSTIs and their VLAN IDs are equal on both switches.
Answer: D
Explanation
QUESTION 181
You have a stub OSPF area running in your network. Your supervisor has asked you to build a virtual link across this area to connect new equipment acquired in a
recent ISP acquisition.Which statement is correct about this scenario?
Answer: A
Explanation
QUESTION 182
You own a small company and need to assign IPv6 addresses to your routers. Because you want to follow the guidelines spelled out in RFC 3177, you want to design
your network with the correct prefixes.Which prefix would your ISP likely allocate to your company?
A. 47-bit prefix
B. 48-bit prefix
C. 64-bit prefix
D. 128-bit prefix
Answer: B
Explanation
QUESTION 183
Your customer would like to forward traffic using DLCI 600 and maintain Layer 2 information across a VPN.Which solution will meet these requirements?
A. a Layer 3 VPN
B. a Layer 2 VPN
C. Virtual Private LAN Service (VPLS)
D. an IPsec VPN
Answer: B
Explanation
QUESTION 184
You have two OSPF routers that are trying to form an adjacency. When you issue the command show ospf neighbor, you see that one router is in the loading state
and the other is in the full state.Why are you seeing the router's state as loading?
A. The router does not know about the received LSA header and has transmitted a link-state request.
B. The router has finished transmitting, but is still receiving database information.
C. The router is waiting for a start event.
D. The router has established bidirectional communication with its peer.
Answer: B
Explanation
QUESTION 185
Which two events could cause the BGP Active state to appear? (Choose two.)
A. The local router does not have a route to the peer device.
B. The local router failed to establish a TCP connection with the peer device.
C. A firewall is stopping all UDP packets.
D. The BGP configuration is incomplete.
Answer: BD
Explanation
QUESTION 186
Click the Exhibit button. The policy shown in the exhibit has been configured and installed on your router.
Answer: A
Explanation
QUESTION 187
Which type of router can provide connectivity between areas in an IS-IS domain?
Answer: B
Explanation
QUESTION 188
You have been asked to provision a service provider's network to accommodate Layer 3 VPNs as defined in RFC 4364.Which three tasks must be performed
before the provider network is ready to carry VPN traffic? (Choose three.)
A. All Juniper Networks PE routers must be configured with an appropriate router-ID unique to the VPN.
B. All Juniper Networks PE routers must be configured with an appropriate route-target unique to the VPN.
C. All Juniper Networks PE routers must be configured with a routing-instance of type forwarding.
D. All Juniper Networks PE routers must be configured with a routing-instance of type vrf.
E. All Juniper Networks PE routers must be configured with a routing-instance containing the CE- facing interface.
Answer: BDE
Explanation
QUESTION 189
By default, which BGP attribute is only compared when two route advertisements are received from the same neighboring AS?
A. MED
B. AS-Path
C. Communities
D. Next Hop
Answer: A
Explanation
QUESTION 190
Click the Exhibit button. Referring to the exhibit, what must be true of the vlan_100 bridge domain?
A. vlan_100 has at least one Ethernet interface assigned to it.
B. vlan_100 does not have an Ethernet interface assigned to it.
C. vlan_100 might have an active Ethernet interface assigned to it.
D. vlan_100 does not have an active Ethernet interface assigned to it.
Answer: D
Explanation
QUESTION 191
An Ethernet bridge is configured such that all interfaces are in a single broadcast domain.Which two tasks does the bridge perform in response to receiving a
frame with an unknown unicast destination MAC address? (Choose two.)
Answer: BD
Explanation
QUESTION 192
You have configured multiple IP-IP tunnels across your network to provide connectivity to remote sites.Which technique is used to help the IP endpoints in your
network determine the optimal packet size to send across your tunnels?
Answer: A
Explanation
QUESTION 193
You are asked to design a Layer 2 VPN service between service provider networks that needs Ethernet transport capabilities. The VPN should support two or
three endpoints. Which Layer 2 VPN technology should you propose?
A. LDP-signaled VPLS
B. BGP-signaled VPLS, using the RFC 4448 Layer 2 frame format
C. LDP Layer 2 circuit, using the RFC 4448 Layer 2 frame format
D. BGP Layer 2 VPN
Answer: B
Explanation
QUESTION 194
You are adding non forwarding route reflectors to your network. Which three actions ensure that VPN routes are advertised properly? (Choose three.)
A. Use rib-groups to add IGP routes to inet.3 and/or inet6.3 on the route reflectors.
B. Add MPLS LSPs between the route reflectors and their client routers.
C. Add the route reflectors to the same IGP domain as their clients.
D. Use rib-groups to add VPN routes to inet.0 and/or inet6.0 on the route reflectors.
E. Add a static default route to inet.3 and/or inet6.3 on the route reflectors.
Answer: ABE
Explanation
QUESTION 195
Which two statements describe advantages of using BGP for VPLS signaling instead of LDP signaling? (Choose two.)
A. There is no need for MPLS signaling protocol.
B. There is a well-defined scaling hierarchy.
C. There is a separation of signaling from other services.
D. There is auto discovery.
Answer: BD
Explanation
QUESTION 196
Which statement is true about the operation of Layer 2 VPNs?
A. Layer 2 VPNs require that CE devices use the same Layer 2 encapsulation
B. Layer 2 VPNs do not permit CE devices to operate a Layer 3 protocol with each other
C. Service provider routers must evaluate the IP header of packets as they traverse their network
D. Layer 2 VPNs allow CEs to use different encapsulations on either side of the VPN
Answer: D
Explanation
QUESTION 197
Which two statements are true when configuring OSPF authentication? (Choose two.)
A. An OSPF link can support both simple password and MD5 authentication at the same time.
B. An MD5 password requires a key ID.
C. You can configure multiple MD5 passwords simultaneously on the same link.
D. If the MD5 password negotiation fails, you can configure OSPF to automatically use a simple password as a backup.
Answer: BC
Explanation
QUESTION 198
Which three statements are true about the BGP community attribute? (Choose three.)
Answer: ABD
Explanation
QUESTION 199
An IS-IS level 1-only router is configured within a larger multilevel hierarchy.Which OSPF area type resembles the routing information in the L1 router's
table?
Answer: D
Explanation
QUESTION 200
Which two statements are correct about the service provider MPLS network shown in the exhibit? (Choose two.)
A. R3 will perform a label pop operation on the transport MPLS label.
B. Traffic from Network 1 to Network 3 and traffic from Network 1 to Network 4 each need their own unique label-switched path.
C. Traffic from Network 1 to Network 3 and from Network 1 to Network 4 can share the same label- switched path.
D. R3 will perform a label swap operation on the transport MPLS label.
Answer: AD
Explanation
QUESTION 201
Which two statements are correct about IS-IS? (Choose two.)
A. A level 1 only router can never form an adjacency with a level 2 only router.
B. For level 2 adjacencies, the area IDs can be different.
C. For level 2 adjacencies, the area IDs must be the same.
D. A level 1 only router can form an adjacency with a level 2 only router.
Answer: CD
Explanation
QUESTION 202
You are adding an IPv6 configuration to an Interface on a Junos device.
In this scenario, which statement is correct?
A. The link local address must be manually configured within the fdO0::/8 prefix range.
B. The link local address must be manually configured within the fe80::/10 prefix range.
C. The link local address is automatically created using the MAC address within the fe80::'l0 prefix range.
D. The link local address is automatically created using the MAC address within the fd00::/8 prefix range.
Answer: D
Explanation
QUESTION 203
Which statement is correct about IS-IS?
Answer: C
Explanation
QUESTION 204
Which new field is added to an IPv6 header as compared lo IPv4?
A. version
B. checksum
C. fragment offset
D. flow label
Answer: D
Explanation
QUESTION 205
Interface ge-0/0/0.0 connects your network to your ISP. You want to advertise this interface address as an Internal route In OSPF without creating a neighbor with
your ISP.
In this scenario, how is this task accomplished?
Answer: D
Explanation
QUESTION 206
What are two types of SlDs used in segment touting? (Choose two.)
A. node
B. adjacency
C. link
D. interface
Answer: AB
Explanation
QUESTION 207
Which prefix in the output shown in the exhibit is an external prefix injected by an OSPF router?
A. 192.168.1.3 B.
172.18.1.0/24 C.
192.108.1.4
D. 172.26.4.0730
Answer: D
Explanation
QUESTION 208
Which statement describes integrated routing and bridging (IRB) interfaces?
Answer: C
Explanation
QUESTION 209
The LSP is not establishing correctly.
Referring to the exhibit, what should you do to solve the problem?
A. Enable traffic engineering for the OSPF protocol.
B. Enable traffic engineering for the IS-IS protocol.
C. Enable traffic engineering for the BGP protocol.
D. Enable traffic engineering for the RSVP protocol.
Answer: D
Explanation
QUESTION 210
You are bringing a new network online with three MX Series devices enabled for STP. No root bridge priority has been configured. Which statement is true in this
scenario?
A. The device with the lowest MAC address will be elected as the root bridge.
B. The device with the highest MAC address will be elected as the root bridge.
C. The device with the lowest numerical lo0 IP address will be elected as the root bridge.
D. The device with the highest numerical lo0 IP address will be elected as The bridge.
Answer: A
Explanation
QUESTION 211
What Is a key differentiators of generate routes from aggregate routes?
Answer: C
Explanation
QUESTION 212
Which statement is correct about the FE80;:/10 prefix?
Answer: A
Explanation
QUESTION 213
You are asked to create connections between routing instances on the same Junos device and route between the connected Instances. What are two ways to
accomplish this task? (Choose two.)
Answer: AB
Explanation
QUESTION 214
Which configuration selling prohibits a static route from being redistributed by a dynamic routing protocol?
A. route-filter
B. no-readvertise
C. qualified-next-hop
D. passive
Answer: B
Explanation
QUESTION 215
What is the correct order of BGP attributes for active route selection?
A. next hop -> local preference -> AS path -> MED -> origin
B. next hop -> AS path -> local preference -> origin -> MED
C. next hop -> local preference -> AS path -> origin -> MED
D. next hop -> origin -> local preference -> AS path -> MED
Answer: C
Explanation
QUESTION 216
What are three well-known mandatory BGP attributes? (Choose three.)
A. next hop
B. origin
C. community
D. MED
E. AS path
Answer: ABE
Explanation
QUESTION 217
Referring to the exhibit, where should next-hop-self-policy be applied to alter the next-hop value?
A. The policy is applied as an export policy for the group int-64503.
B. The policy is applied as an export policy for the group ext-64501.
C. The policy is applied as an import policy for the group int- 64 503.
D. The policy is applied as an Import policy for the group ext-64501.
Answer: D
Explanation
QUESTION 218
Referring to the exhibit, which two statements are correct? (Choose two.)
75
Answer: C
Explanation
QUESTION 219
You are deploying link aggregation groups.
Answer: BD
Explanation
QUESTION 220
You are asked to assign interface xe-1/0/5 to a virtual switch. What must be accomplished to complete the configuration?
Answer: C
Explanation
QUESTION 221
Referring to the exhibit, which statement is true about VRRP?
76
Answer: D
Explanation
QUESTION 222
Referring to the exhibit, you have configured an aggregate route that represents the 172.21.0.0/24, 172.21.1.0/24, and 172.21.2.0/24 networks. However, when
you view the routing table, your new route hidden.
Which action would you perform to determine the problem?
A. Verify that you have active contributing routes on the device.
B. Verify that you have configured a policy on the device to accept aggregate routes.
C. Verify that you have defined a metric value for the aggregate route.
D. Verify that you have set the preference to a lower default value.
Answer: D
Explanation
QUESTION 223
What are two bridging concepts that are used to maintain an Ethernet switching table? (Choose two.)
A. learning
B. exporting
C. aging
D. timing
Answer: A
Explanation
QUESTION 224
You are asked to configure the OSPF environment to prevent the DR other routers from participating in DR/BDR election.
Referring to the exhibit, which command will accomplish this task?