Professional Documents
Culture Documents
Exam : JN0-363
Vendor : Juniper
Version : V12.65
1
IT Certification Guaranteed, The Easy Way!
NO.1 How does a Junos device learn about MAC addresses when II is first connected to an Ethernet
LAN?
(A). The device sends out a network broadcast message asking tor all devices and MAC addresses on
the network and stores this information In addition lo the interface from which the response was
received.
(B). The device learns the destination MAC addresses from traffic in the network and stores this MAC
address in addition to the interface from which the traffic was received.
(C). The device learns the source MAC addresses from traffic in the network and stores this MAC
address in addition to the interface from which the traffic was received.
(D). The device sends out a network multicast message asking for all devices and MAC addresses on
the network and stores this Information in addition to the interface from which the response was
received.
Answer: D
NO.2 Exhibit
Which two statements are correct about the service provider MPLS network shown in the exhibit?
(Choose two.)
(A). R3 is considered a P router.
(B). R3 is considered a PE router.
(C). R3 is considered a transit router.
(D). R3 is considered an ingress router.
Answer: A,B
NO.3 Exhibit
2
IT Certification Guaranteed, The Easy Way!
You are asked to configure the OSPF environment to prevent the DRother routers from participating
in DR/BDR election.
Referring to the exhibit, which command will accomplish this task?
(A). set protocols ospf area 0.0.0.0 interface ge-0/0/l priority 255
(B). set protocols ospf area 0.0.0.0 interface ge-0/0/1 priority 0
(C). set protocols ospf area 0.0.0.0 interface ge-0/0/1 interface-type nbma
(D). set protocols ospf area 0.0.0.0 interface ge-0/0/1 interface-type p2p
Answer: A
NO.4 What are two types of SlDs used in segment touting? (Choose two.)
(A). node
(B). adjacency
(C). link
(D). interface
Answer: A,B
NO.5 Exhibit
3
IT Certification Guaranteed, The Easy Way!
You have an established LSP between your R1 and R5 devices using the configuration shown in the
exhibit. You are asked to ensure that MPLS labels are used to forward traffic by all devices within the
LSP.
Which action will accomplish this behavior?
(A). Configure the ultimace-hop-popping statement under the R1_TO_R5 label switched path on R1.
(B). Configure the explicit-null statement under the protocol mpls hierarchy on R1.
(C). Delete the no-espf statement under the R1_TO_R5 label switched path on R1.
(D). Configure the install statement under the R1_TO_R5 label switched path on R1.
Answer: D
NO.6 Which statement describes integrated routing and bridging (IRB) interfaces?
(A). An IRB interface Is an IP gateway For hosts of a bridge domain.
(B). An IRB interface assigns interfaces to VLANs.
(C). An IRB interface enables Layer 2 switching on the router.
(D). An IRB interface defines a bridge domain.
Answer: C
NO.7 Exhibit
4
IT Certification Guaranteed, The Easy Way!
Routers R1 and R4 have a VRRP priority of 90, while R2 and R3 have default VRRP priorities Referring
to the exhibit, which router will be elected as the primary VRRP router?
(A). R3
(B). R4
(C). R2
(D). R1
Answer: D
NO.8 Exhibit
S Exhibit
LSI1 A AS 65501
ISPB AS 65502
Advertised Prefixes: 172.20.0.0/24 172.20.20.0/24 172.20.21.0/24
\N
Advertised Prefixes: 172.20.0.0/24
172.20.1.0/24
Referring to the exhibit, which two statements are correct? (Choose two.)
5
IT Certification Guaranteed, The Easy Way!
(A). Devices in AS 65512 will prefer ISP A for traffic destined to the 172.20.21.0/24 network.
(B). Devices In AS 65512 will prefer ISP A for traffic destined to the 172.20.0.0/24 network.
(C). Devices in AS 65512 will prefer ISP B for traffic destined to the 172.20.21.0/24 network.
(D). Devices In AS 65512 will prefer ISP B for traffic destined to the 172.20.0.0/24 network.
Answer: C
NO.9 Exhibit
NO.10 Exhibit
Referring to the exhibit, which two additional steps should you lake to fully configure NSR? (Choose
two.)
(A). You should configure the max period for NSR precision timers.
(B). You must configure GRES.
(C). You must configure graceful restart.
6
IT Certification Guaranteed, The Easy Way!
NO.11 Exhibit
You configured interface ge-0/070.0 to run IS-IS. but this interface does not appear in the output of
the show isis adjacency command as shown in the exhibit.
What is the problem in this scenario?
(A). This is a Gigabit Ethernet interface, that is incompatible with the reference-bandwidth 100g
statement.
(B). The family iso statement must be added to the logical interface.
(C). The router at the other end of the link Is not sending any IS-IS Hello messages.
(D). The router at the other end of the link is a Level 1 only router.
Answer: B
NO.12 Which two interface types are used as tunnel endpoints? (Choose two.)
(A). ae
(B). ip
(C). ge
(D). gr
Answer: B,C
NO.13 Exhibit
7
IT Certification Guaranteed, The Easy Way!
You want the R1 and R3 routers to forward traffic destined to the 203.0.113.0/24 network through
R2. Which BGP attribute would you modify to satisfy this requirement?
(A). community
(B). origin
(C). MED
(D). local preference
Answer: C
NO.15 Exhibit
8
IT Certification Guaranteed, The Easy Way!
The exhibit shows a topology with 1 Gbps interfaces between routers, and four RSVP LSPs operating
with the respective bandwidth reservations.
Which path will be selected for a new LSP from R4 to R6 with a bandwidth reservation of 400 Mbps?
(A). R4 -> R1 -> R2 -> R5 -> R6
(B). R4 -> R5 -> R6
(C). R4 -> R5 -> R2 -> R3 -> R6
(D). R4 -> R1 -> R2 -> R3 -> R6
Answer: A
NO.16 Which two statements ate correct about the BGP next-hop attribute value? (Choose two.)
(A). By default, the next-hop value is changed across IBGP links.
(B). By default, the next-hop value is changed across EBGP links.
(C). By default, the next-hop value is not changed across IBGP links.
(D). By default, the next-hop value is not changed across EBGP links.
Answer: A
NO.18 Exhibit
9
IT Certification Guaranteed, The Easy Way!
Which prefix in the output shown in the exhibit is an external prefix injected by an OSPF router?
(A). 192.168.1.3
(B). 172.18.1.0/24
(C). 192.108.1.4
(D). 172.26.4.0730
Answer: D
NO.20 Exhibit
10
IT Certification Guaranteed, The Easy Way!
NO.21 Exhibit.
11
IT Certification Guaranteed, The Easy Way!
Referring to the exhibit, you have configured an aggregate route that represents the 172.21.0.0/24,
172.21.1.0/24, and 172.21.2.0/24 networks. However, when you view the routing table, your new
route hidden.
Which action would you perform to determine the problem?
(A). Verify that you have active contributing routes on the device.
(B). Verify that you have configured a policy on the device to accept aggregate routes.
(C). Verify that you have defined a metric value for the aggregate route.
(D). Verify that you have set the preference to a lower default value.
Answer: D
NO.22 You are bringing a new network online with three MX Series devices enabled for STP. No root
bridge priority has been configured. Which statement is true in this scenario?
(A). The device with the lowest MAC address will be elected as the root bridge.
(B). The device with the highest MAC address will be elected as the root bridge.
(C). The device with the lowest numerical lo0 IP address will be elected as the root bridge.
(D). The device with the highest numerical lo0 IP address will be elected as The bridge.
Answer: A
NO.23 Exhibit
12
IT Certification Guaranteed, The Easy Way!
You confirm that the R2 and R3 routers are receiving a BGP route to the 203.0.113.0/24 network, but
both routers display the route as hidden. Referring to the exhibit, which two actions solve this
problem? (Choose two.)
(A). Apply the routing policy on R1 as an export policy to the IBGP group.
(B). Apply the touting policy on R1 as an Import policy to the IBGP group.
(C). Configure a routing policy on R1 that sets the next hop for the 203.0.113.0/24 BGP route to the IP
address that R1 uses for IBGP peering.
(D). Configure a routing policy on R1 that sets the next hop for the 203.0.113.0/24 BGP route to the
IP address that R1 uses for EBGP peering.
Answer: C,D
NO.24 Exhibit
Referring to the exhibit, which two statements are correct? (Choose two.)
13
IT Certification Guaranteed, The Easy Way!
NO.25 Which two statements are correct about IS-IS? (Choose two.)
(A). A level 1 only router can never form an adjacency with a level 2 only router.
(B). For level 2 adjacencies, the area IDs can be different.
(C). For level 2 adjacencies, the area IDs must be the same.
(D). A level 1 only router can form an adjacency with a level 2 only router.
Answer: C,D
NO.28 Exhibit
You are asked to configure OSPF between routers R1 and R2 using IPv6 addresses.
Which two tasks will accomplish your objective? (Choose two.)
(A). Issue the sec protocols ospf area 0.0.0.0 interface ge-0/0/1.0 command.
(B). Under the [edit routing-options] hierarchy, configure a 32-bit router ID.
(C). issue the set protocols ospf3 area 0.0.0.0 interface ge-0/0/1.0 command.
14
IT Certification Guaranteed, The Easy Way!
(D). Under the [edit routing-options] hierarchy, configure a 128-bit router ID.
Answer: A,D
NO.29 Exhibit
NO.30 Exhibit
The routers shown in the exhibit ate configured for segment routing.
In this scenario, what is the adjacency SIO that Router B advertises to Router A?
(A). 12
(B). 10.1.1.1
(C). 10.1.1.2
(D). 11
Answer: B
15
IT Certification Guaranteed, The Easy Way!
NO.32 You want to enable a routing platform with redundant REs to switch from a primary RE to a
backup RE without alerting peer nodes. Which two technologies would you use to satisfy this
requirement? (Choose two.)
(A). GRES
(B). VRRP
(C). NSR
(D). ISSU
Answer: B,C
NO.33 Which two LSA types are permuted in OSPF totally stubby areas? (Choose two.)
(A). Type 1
(B). Type 3
(C). Type 5
(D). Type 7
Answer: C,D
NO.34 Exhibit
Referring to the exhibit, what must be included in the Route1 configuration when establishing an
EBGP session with the ISP?
(A). A local address must be specified.
(B). A local AS must be specified.
(C). The BGP session type internal must be specified.
16
IT Certification Guaranteed, The Easy Way!
NO.35 Exhibit
Referring to the exhibit, what is the minimum number of LSPs required to support alt four networks?
(A). 1
(B). 2
(C). 8
(D). 4
Answer: C
NO.36 Which LSA type does an OSPF ABR use to advertise external routes generated by an
NSSAASBR into the backbone?
(A). Type 5
(B). Type 7
(C). Type 3
(D). Type 1
Answer: C
NO.37 You want to see a detailed list of all established BGP sessions. In this scenario, what would be
a valid command to accomplish this task?
(A). show bgp neighbor
(B). show bgp summary
(C). show rouse receive-protocol bgp <neighbor IP address>
(D). show rouse protocol bgp
Answer: D
NO.38 Which two statements ate correct about the community BGP attribute on a Junos device?
(Choose two.)
(A). The community attribute is a mandatory BGP attribute.
(B). If the community attribute is present, it is ignored and deleted in the BGP updates.
(C). If the community attribute is present, it should be passed unchanged in the BGP updates.
(D). The community attribute is an optional BGP attribute.
Answer: A,C
NO.39 Exhibit
17
IT Certification Guaranteed, The Easy Way!
Which two statements ate correct about the actions taken as the packet traverses the service
provider MPLS network from Site 1 to Site 2 as shown in the exhibit? (Choose two.)
(A). R2 will perform a lookup using the mpls.0 table.
(B). R1 will perform a lookup using the lnet.3 table.
(C). R1 will perform a lookup using the mpls.0 table.
(D). R2 will perform a lookup using the inet.3 table.
Answer: A
NO.40 Exhibit
Referring to the exhibit, which two statements are correct? (Choose two.)
(A). The OSPF Interfaces are configured as point-to-point.
(B). The ge-0/0'1.0 Interface is configured as passive.
(C). The R2 device is an ABR.
(D). Junos OS default OSPF hello timers and dead intervals are used on all interfaces.
Answer: B,D
NO.41 Which two statements are correct about the way that BGP propagates routes by default?
(Choose two.)
18
IT Certification Guaranteed, The Easy Way!
NO.43 Interface ge-0/0/0.0 connecls yout network to your ISP. You want to advertise this interface
address as an Internal route In OSPF without creating a neighbor with your ISP.
In this scenario, how is this task accomplished?
(A). Remove interface ge-0/0/0.0 from OSPF.
(B). Create a generated route for Interface ge-0/0/0.0.
(C). Add ge-0/0/0.0 as a passive interface In OSPF.
(D). Configure a static route for Interface ge-0/0/0.0.
Answer: D
Which two statements are correct about the service provider MPLS network shown in the exhibit?
(Choose two.)
(A). R3 will perform a label pop operation on the transport MPLS label.
(B). Traffic from Network 1 to Network 3 and traffic from Network 1 to Network 4 each need their
own unique label-switched path.
(C). Traffic from Network 1 to Network 3 and from Network 1 to Network 4 can share the same label-
switched path.
(D). R3 will perform a label swap operation on the transport MPLS label.
Answer: A,D
NO.45 Exhibit
19
IT Certification Guaranteed, The Easy Way!
You are advertising a summary route that represents your local network (172.20.0.0716) to both ISP
A and ISPB. You want to influence all traffic sent to you from ISP C to go through R2.
How would you accomplish this task?
(A). On R1, prepend your AS number three times on the 172.20.0.0/16 route when advertising It to
ISP 1.
(B). On R1, change the local preference value to 250.
(C). On R2. prepend your AS number three times on the 172.20.0.0/16 route when advertising it to
ISP 2.
(D). On R2, change the local preference value to 50.
Answer: B
NO.46 Exhibit
20
IT Certification Guaranteed, The Easy Way!
NO.47 What is the correct order of BGP attributes for active route selection?
(A). next hop -> local preference -> AS path -> MED -> origin
(B). next hop -> AS path -> local preference -> origin -> MED
(C). next hop -> local preference -> AS path -> origin -> MED
(D). next hop -> origin -> local preference -> AS path -> MED
Answer: C
NO.48 What are two bridging concepts that are used to maintain an Ethernet switching table?
(Choose two.)
(A). learning
(B). exporting
(C). aging
(D). timing
Answer: A
NO.49 Exhibit
21
IT Certification Guaranteed, The Easy Way!
Referring to the exhibit, how do you verify the status of the tunnel from R1?
(A). Issue the ping 172.20.111.10 source 172.20.110.1 command.
(B). Issue the ping 172.20.111.10 source 198.51.100.1 command.
(C). Issue the ping 172.20.iii.io source 203.0.113.2 command.
(D). Issue the ping 172.20. Ill. 10 command.
Answer: C
NO.50 Which configuration selling prohibits a static route from being redistributed by a dynamic
routing protocol?
(A). route-filter
(B). no-readvertise
(C). qualified-next-hop
(D). passive
Answer: B
NO.52 Exhibit
22
IT Certification Guaranteed, The Easy Way!
Referring to the exhibit, where should next-hop-self-policy be applied to alter the next-hop value?
(A). The policy is applied as an export policy for the group int-64503.
(B). The policy is applied as an export policy for the group ext-64501.
(C). The policy is applied as an import policy for the group int- 64 503.
(D). The policy is applied as an Import policy for the group ext-64501.
Answer: D
NO.53 Exhibit
23
IT Certification Guaranteed, The Easy Way!
Which two statements ate correct about the information shown in the exhibit? (Choose two.)
(A). The root bridge is reachable using the ge-0/0/14 interface.
(B). This switch is the root bridge for this spanning tree topology.
(C). This switch has a bridge priority of 8k.
(D). The root bridge's priority Is 4k.
Answer: B,D
NO.54 Exhibit
24
IT Certification Guaranteed, The Easy Way!
25
IT Certification Guaranteed, The Easy Way!
NO.56 The segment touting SRGB start label Is 10,000 and the SRGB index range is 500.
In this scenario, which two statements are correct? (Choose two.)
(A). The first usable label is 10,001.
(B). The last usable label is 10.501.
(C). The last usable label is 10,499.
(D). The first usable label Is 10,000.
Answer: C,D
NO.57 Which two statements are correct when using LDP? (Choose two.)
(A). The lnet.3 table will contain only the paths explicitly defined.
(B). The inet.3 table will contain a full mesh of label-switched paths to other LDP-enabled routers.
(C). LDP label-switched paths are created by configuring LDP on at least one physical router interface.
(D). LDP label-switched paths are created by configuring LDP on the loopbacK Interface.
Answer: B,C
NO.58 What are three well-known mandatory BGP attributes? (Choose three.)
(A). next hop
(B). origin
(C). community
(D). MED
(E). AS path
Answer: A,B,E
NO.59 You are bringing a new network online with three IS-IS routers using default Junos election
priorities. The routers are configured as Level 2 only IS-IS routers. Which statement is true about the
DIS election in this scenario?
(A). The router with the highest MAC address will be elected as the DIS.
(B). The router with the highest numerical lo0 IP address will be elected as the DIS.
(C). The router with the lowest numerical lo0 IP address will be elected as the DIS.
(D). The router with the lowest MAC address will be elected as the DIS.
Answer: B
NO.60 You are asked to create connections between routing instances on the same Junos device and
route between the connected Instances. What are two ways to accomplish this task? (Choose two.)
(A). Use physical interfaces.
(B). Use an IRB interface.
(C). Use logical tunnel interfaces.
26
IT Certification Guaranteed, The Easy Way!
NO.61 Exhibit
NO.62 Exhibit
You have configured graceful RE switchover (GRES), however you cannot complete the show system
switchover command.
Referring to the exhibit, what is the problem?
27
IT Certification Guaranteed, The Easy Way!
NO.63 You have created a routing instance named vr3 that will provide access to Server 2 (10.0.0.2)
(or the hosts on the 10.10.10.0/24 network. Which command would you use to test connectivity
between vr3 and Server 2?
(A). user@vr3> ping 10.0.0.2 count 5
(B). user@vr3> ping 10.0.0.2 count 5 source 10.10.10.1
(C). user9router1> ping 10.0.0.2 count 5
(D). user@router1> ping 10.0.0.2 routing-instance vr3 count 5
Answer: C
NO.64 You are asked to configure an LSP which uses the OSPF link state database for path
computations. Which two statements are correct in this scenario? (Choose two.)
(A). You must use the no-cspf parameter in the label-switched-path configuration.
(B). Traffic engineering extensions ate enabled by default In OSPF.
(C). Traffic engineering extensions are not enabled by default in OSPF.
(D). You must use the policing parameter in the label-switched-path configuration.
Answer: A,C
NO.65 Exhibit
Referring to the exhibit, which two statements are correct? (Choose two.)
28
IT Certification Guaranteed, The Easy Way!
(A). Traffic ingressing ge-0/0/0 that is tagged with VLAN 101 will egress ge-0/0/1 unchanged.
(B). Traffic ingressing ge-0/0/0 that is tagged will VLAN 100 will be dropped.
(C). Traffic ingressing ge0/0/0 that Is tagged with VLAN 200 will egress ge-0/0/1 with an outer VLAN
tag of 200.
(D). Traffic ingressing ge-0/0/0 that is tagged with VLAN 101 will egress ge-0/0M with an outer VLAN
tag of 200.
Answer: A,B
29
IT Certification Guaranteed, The Easy Way!
Referring to the exhibit, how many milliseconds must pass before the interface ge-0/0/1.0 is
considered down?
(A). 1200 ms
(B). 900 ms
(C). 1600 ms
(D). 2400 ms
Answer: A
NO.69 What happens when a packet matches a static route with the next hop parameter set to
reject?
(A). The system silently drops the packet
(B). An ICMP message is sent to the source and the packet is forwarded
(C). An ICMP message is sent to the source and the packet is dropped
(D). The packet is forwarded and the packet is marked as rejected in the header
Answer: C
https://www.informit.com/articles/article.aspx?p=30666&seqNum=5
30
IT Certification Guaranteed, The Easy Way!
You have just configured IS-IS, but the adjacency is not coming up.
Referring to the exhibit, what is the cause?
(A). The routers must be in different areas.
(B). One router is configured for Level 2 only.
(C). Only one side is configured using the point-to-point parameter.
(D). The family iso parameters is missing on the interfaces.
Answer: C
NO.72 Which three statements are true regarding the show system switchover operational mode
command? (Choose three.)
(A). This command can only be issued on the master Routing Engine.
(B). This command displays the status of graceful switchover.
31
IT Certification Guaranteed, The Easy Way!
(C). This command can only be issued on the backup Routing Engine.
(D). This command displays the status of the interface and process databases.
(E). This command displays the status of the kernel database.
Answer: B,C,E
NO.73 An Ethernet bridge is configured such that all interfaces are in a single broadcast domain By
default. Which two tasks does the bridge perform in response to receiving a multicast frame?
(Choose two)
(A). It learns the source MAC address
(B). It drops the frame
(C). It floods the frame out of all interfaces except the one on which it was received
(D). It floods the frame out of particular interfaces based on its multicast MAC table
Answer: A,C
NO.74 Which two statements reflect benefits of performing per-flow load balancing over per-packet
load balancing? (Choose two.)
(A). All physical links in the network are used equally.
(B). Packets arrive at the destination in the order they were sent.
(C). Provides easier implementation of class of service policies.
(D). Allows the destination host to re-order packets and increase performance.
Answer: B,C
NO.75 What are tree types of interfaces that can be used in an MX Series device when implementing
a virtual switch routing instance? (Choose three.)
(A). Trunk interface
(B). Access interface
(C). Layer 2 logical interface
(D). GRE tunnel interface
(E). Logical tunnel interface
Answer: A,B,C
NO.76 Click the Exhibit button. From the output shown in the exhibit, what would happen to a
packet destined for address 172.29.3.5?
32
IT Certification Guaranteed, The Easy Way!
(A). The address is not in the aggregate range; the packet is sent to the Routing Engine.
(B). The address is in the aggregate range; the packet will be silently dropped.
(C). The address is not in the aggregate range; the packet will be forwarded.
(D). The address is in the aggregate range; the packet will be dropped.
Answer: D
NO.78 Because of recent network failures, additional circuits have been purchased. In addition, Fast
reroute has been configured on critical MPLS LSPs.
When the next failure occurs, which two time intervals will affect fast reroute? (Choose two.)
(A). The amount of time required to reroute the traffic onto the detour
(B). The amount of time to detect a link or node failure
(C). The amount of time required to recalculate the best detour
(D). The amount of time it takes to ping the gateway on the detour link
Answer: A,B
33
IT Certification Guaranteed, The Easy Way!
NO.80 Your customer complains that their Layer 3 VPN is not passing traffic from one site to
another. You assigned that customer to VPN-A. Which command on the PE router will confirm the
presence of customer routes?
(A). show route VPN-A
(B). show route VPN-A table bgp.l2vpn.0
(C). show route table inet.3 VPN-A
(D). show route table VPN-A.inet.0
Answer: D
34
IT Certification Guaranteed, The Easy Way!
You are receiving the same route prefix from four EBGP neighbors.
Based on the information provided in the exhibit, which route will become active?
(A). Route2
(B). Route3
(C). Route4
(D). Route1
Answer: D
35
IT Certification Guaranteed, The Easy Way!
You have configured IPv6 over IPv4 tunneling, as shown in the exhibit. However, hosts connected to
network 2001:0:0:1::0/64 cannot communicate with hosts on network 2001:0:0:2::0/64. The router
R2 has a similar configuration as the R1 router.
How would you solve this problem?
(A). Configure an IGP across the tunnel interfaces
(B). Configure an IPv6 address on the tunnel interfaces
(C). Configure the next hop of the inet6.0 static route to point to the physical interface between the
routers
(D). Configure the next hop of the inet6.0 static route to point to the IPv4 address of the remote
router
Answer: D
NO.84 Referring to the exhibit, which firewall filter action(s) will be applied to incoming frames to
ge-1/0/3?
36
IT Certification Guaranteed, The Easy Way!
(A). Frames will be counted initially by filterB and then counted by filterA.
(B). Frames will be counted initially by filterA and then counted by filterB.
(C). Frames will be counted by filterA only.
(D). Frames will be counted by filterB only.
Answer: B
NO.85 Which two configuration elements must match on all switches participating in the same
MSTP region? (Choose two.)
(A). mstp-version
(B). configuration-name
(C). msti-revision
(D). revision-level
37
IT Certification Guaranteed, The Easy Way!
Answer: B,D
NO.86 You are deploying an RSVP-based MPLS network in your core. You must ensure that your LSPs
are continually analyzing the usage levels and recalculating the best LSP. You also want to ensure that
a minimal amount of traffic is lost when an LSP is re-signaled without user intervention.
Which two features must be enabled in this scenario? (Choose two.)
(A). adaptive
(B). MPLS fast reroute
(C). class of service
(D). auto-bandwidth
Answer: B,D
NO.87 Which two fields of a hello packet must match on both routers when forming an OSPF
adjacency? (Choose two.)
(A). Hello interval
(B). Designated route
(C). Router priority
(D). Network mask
Answer: A,D
NO.88 You must establish an MPLS LSP between two locations. You are required to ensure that the
LSP traverses specific routers within the network.
Which solution is correct in this scenario?
(A). Enable traffic engineering within RSVP and enable the Fast Reroute feature
(B). Implement RSVP and define the explicit route the LSP must follow
(C). Implement LDP and define the explicit route the LSP must follow
(D). Enable traffic engineering within LDP and define the explicit route the LSP must follow
Answer: B
NO.89 You must configure an MX Series device to receive and forward a mixture of single-tag and
dual-tag frames on interface xe-0/0/0.
In this scenario what will accomplish goal?
(A). xe-0/0/0 {flexible-vlan-tagging;}
(B). xe-0/0/0 {stacked-vlan-tagging;}
(C). xe-0/0/0 {vlan-vci-tagging;}
(D). xe-0/0/0 {vlan-tagging;}
Answer: A
NO.90 Which two high availability features preserve interface and kernel information during
reconvergence? (Choose two.)
(A). graceful restart (GR)
(B). nonstop bridging (NSB)
(C). nonstop active routing (NSR)
(D). graceful Routing Engine switchover (GRES)
Answer: C,D
38
IT Certification Guaranteed, The Easy Way!
NO.91 Click the Exhibit button. Two bridge domains are configured as shown in the exhibit.
What must be configured as part of the ge-1/0/3 interface configuration to accept tagged frames of
VLANs 100 and 200?
(A). encapsulation vlan-bridge
(B). encapsulation ethernet-bridge
(C). interface-mode trunk
(D). vlan-id-range [100 200]
Answer: A
NO.92 Which three attributes are well-known mandatory BGP attributes? (Choose three.)
(A). next-hop
(B). AS path
(C). local preference
(D). MED
(E). origin
Answer: A,B,E
https://www.kwtrain.com/blog/bgp-pt2
NO.93 Click the Exhibit button. After the MAC learning limit of 3000 is reached for the bd bridge
domain as shown in the exhibit, what happens to frames that arrive that contain unknown unicast
destination addresses?
39
IT Certification Guaranteed, The Easy Way!
Your network consists of subnets shown in the exhibit. You are asked to create an aggregate route for
Router 1.
What is the appropriate prefix for the aggregate route in this scenario?
(A). 172.42.32.0/20
(B). 172.42.32.0/22
(C). 172.42.32.0/19
(D). 172.42.32.0/21
Answer: C
You have configured the IBGP group shown in the exhibit. However, committing your configuration
fails.
Which parameter should you add to the IBGP group configuration to correct the problem?
(A). Type external
(B). Type internal
(C). Export <policy name>
(D). As -override
Answer: B
40
IT Certification Guaranteed, The Easy Way!
NO.96 Which two values are used by an RSTP bridge to remove stale BPDU information? (Choose
two.)
(A). Message Age
(B). Forwarding Delay
(C). Hello Time
(D). Max Age
Answer: A,D
NO.97 A customer pays for the bandwidth on a per-packet basis. The network administrator wants
to constrain costs and prevent Layer 2 loops on a multihomed Layer 2 WAN network.
Which technology would satisfy these requirements?
(A). Rapid Spanning Tree Protocol
(B). Multiple Spanning Tree Protocol
(C). Loop protection
(D). MPLS over GRE
Answer: C
NO.98 Which two statements are correct about the BGP MED attribute? (Choose two.)
(A). BGP uses the MED value when peering to two or more connections to the same upstream AS
(B). BGP routes require the MED attribute be defined
(C). BGP uses the MED value when peering to two different upstream ASs
(D). BGP assumes the MED value to be 0, if not already defined
Answer: A,D
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html
Referring to the exhibit, what is the correct OSPF interface state for the ge-0/0/1 interface?
(A). BDR
(B). Down
(C). DR
(D). DRother
Answer: C
NO.100 You have a stub OSPF area running in your network. Your supervisor has asked you to build
a virtual link across this area to connect new equipment acquired in a recent ISP acquisition.Which
statement is correct about this scenario?
(A). Type 5 LSAs would be blocked in a stub area.
(B). Type 5 LSAs would carry external information across your transit area to the backbone.
41
IT Certification Guaranteed, The Easy Way!
(C). Type 5 LSAs would be seen only in the newly attached area.
(D). Type 5 LSAs would be converted to type 7 LSAs.
Answer: A
On an MX Series device, you must enable routing between VLANs 100,200, and the Internet ge-5/1/0,
and ge-5/1/2 are bundled into interface ae3. Ge-5/1/4, and ge-5/1/5 are bundles into interface ae2.
Both AE bundles trunk VLANs 100 and 200.
In this scenario, what is the correct configuration snippet for VLAN 100?
(A). interfaces {xe-2/1/0 {unit 0{family inter {address 10.0.10.2/24;}}}irb {unit 0{family inet {address
10.0.1.2/24;}}unit 1 family inet {address 10.0.2.2/24;}}}}bridge- domains {vlan- 100{domain-typ
e bridge;vlan-id 100;interface ge-2/2/2.100;interface ae1.100;interface ae3.100;routing-interface
irb.0;}}
(B). interfaces {xe-2/1/0{unit 0{family inet {address 10.0.10.2/24;}}}ip-0/0/0{unit 0{family inet
{address 10.0.1.2/24;}}unit 1{family inet {address 10.0.2.2/24;}}}}bridge- domains {vlan- 100{domai
n-type bridge;vlan-id 100;interface ge-2/2/2.100;interface ae1.100;interface ae3.100;interface ip-
0/0/0.0;}}
(C). interfaces {xe-2/1/0 {unit 0 {family inet {address 10.0.10.2/24;}}}irb {unit 0{family inet {address
10.0.1.2/24:}}unit 1 {family inet {address 10.0.2.2/24;}}}}bridge- domains {vlan- 100{domain-typ
e bridge;vlan-id 100;interface ge-2/2/2.100;interface ae1.100;interface ae3.100;}}
(D). interfaces {xe-2/1/0 {unit 0{family inet {address 10.0.10.2/24;}}}ip-0/0/0 {unit 0 {family inet
{address 10.0.1.2/24;}}unit 1 {family inet {address 10.0.2.2/24;}}}} bridge-domains {vlan- 100{domain
-type bridge;vlan-id 100;interface ge-2/2/2.100;interface xe-2/1/0.0;interface ae1.100;interface
ae3.100interface ip-0/0/0.0;}}
Answer: C
NO.102 What are two valid next-hop types that would be configured for a static route? (Choose
two.)
42
IT Certification Guaranteed, The Easy Way!
NO.103 Click the Exhibit button. In the exhibit, all routers are sending routes to Router B.Which
routes will be advertised from Router B to Router E?
NO.104 What are three valid BGP message types? (Choose three.)
(A). Refresh
(B). Hello
(C). Route
(D). Keepalive
(E). Open
Answer: A,D,E
43
IT Certification Guaranteed, The Easy Way!
Answer: C
Your co-worker configures the ge-0/0/0 interface with an IPv6 address of 2001:db8:0:9::/64. After
committing the configuration, your co-worker executes the command shown in the exhibit.
What is the fe80::206:aff:fe0e:e01/64 address in this scenario?
(A). the loopback address
(B). the multicast address
(C). the statically assigned address
(D). the link-local address
Answer: D
NO.107 Which type of router can provide connectivity between areas in an IS-IS domain?
(A). a Level 1 router with adjacencies within a single area
(B). a Level 2 router with adjacencies in more than one area
(C). an area border router with adjacencies in more than one area
(D). a Level 2 router with adjacencies in a single area
Answer: B
NO.108 When working with an MPLS LSP, what will the install 172.16.6.0/24 active command
accomplish?
(A). The command will swap the prefix from inet.0 to inet.3
(B). The command will swap the prefix from inet.3 to inet.0
(C). The command will install the prefix in inet.0 rather than inet.3
(D). The command will install the prefix in inet.3 rather than inet.0
Answer: D
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/lsp-routes.html#id-21214
NO.109 Which two statements are true when configuring OSPF authentication? (Choose two.)
(A). An OSPF link can support both simple password and MD5 authentication at the same time.
(B). An MD5 password requires a key ID.
(C). You can configure multiple MD5 passwords simultaneously on the same link.
(D). If the MD5 password negotiation fails, you can configure OSPF to automatically use a simple
password as a backup.
Answer: B,C
NO.110 Click the Exhibit button. You have two routers connected over a Gigabit Ethernet link as
shown in the exhibit It is required that an IS-IS adjacency be established without the need for a
designated intermediate system (DIS)
44
IT Certification Guaranteed, The Easy Way!
Which configuration statement entered on both routers will achieve this goal?
(A). set interface ge-0/0/2 unit 0 family iso no-dis
(B). set interface ge-0/0/2 unit 0 family iso point-to-point
(C). set protocols isis interface ge-0/0/2.0 no-dis
(D). set protocols isis interface ge-0/0/2.0 point-to-point
Answer: D
NO.111 You want to make use of the nonstop active routing (NSR) feature.
Which complementary feature must also be enabled?
(A). IP anycast
(B). graceful restart
(C). Virtual Router Redundancy Protocol
(D). graceful Routing Engine switchover
Answer: D
https://www.juniper.net/documentation/en_US/junos/topics/concept/nsr-overview.html
NO.112 What are three ways to configure IPv6 addresses in your network? (Choose three.)
(A). Statically configure your IPv6 addresses.
(B). Configure your IPv6 addresses using stateless auto configuration.
(C). Configure your IPv6 addresses by setting up a DHCPv6 server.
(D). Configure your IPv6 addresses by assigning your router a prefix list.
(E). Configure your IPv6 addresses by configuring support for unicast-arp-negotiation.
Answer: A,B,C
NO.113 Click the Exhibit button. Based on the configuration shown in the exhibit, what will be the
state of the IS-IS levels on interface ge-0/0/0.100?
45
IT Certification Guaranteed, The Easy Way!
NO.114 Your customer would like to forward traffic using DLCI 600 and maintain Layer 2 information
across a VPN.Which solution will meet these requirements?
(A). a Layer 3 VPN
(B). a Layer 2 VPN
(C). Virtual Private LAN Service (VPLS)
(D). an IPsec VPN
Answer: B
NO.115 Which two routing protocols make use of a designated router, or pseudo node, to represent
a broadcast network? (Choose two.)
(A). BGP
(B). OSPF
(C). MPLS
(D). IS-IS
Answer: B,D
NO.116 Which three statements are true about BGP? (Choose three)
(A). iBGP peering adds value in small networks with a single upstream connection
(B). iBGP peering adds value in small networks with multiple upstream connections
(C). eBGP peering adds value in small networks with multiple upstream connections
(D). iBGP peering adds value in large enterprise environments with multiple upstream connections
(E). eBGP peering adds value in large enterprise environments with multiple upstream connections
Answer: C,D,E
46
IT Certification Guaranteed, The Easy Way!
(A). The wrong BGP address family is enabled for the BGP session
(B). The route has yet to be verified
(C). The protocol next hop is not reachable
(D). The MPLS LSP to the 192.168.0.2 peer is down
Answer: C
Referring to the exhibit, which two statements are true? (Choose two.)
(A). The BGP peering between R1 and R4 should use loopback interface addresses
(B). The BGP peering between R1 and R4 should use physical interface addresses
(C). The BGP peerings between R1, R2, and R3 should use loopback interface addresses
(D). The BGP peerings between R1, R2, and R3 should use physical interface addresses
Answer: B,C
47
IT Certification Guaranteed, The Easy Way!
NO.120 Which two statements correctly describe the BGP community attribute? (Choose two.)
(A). Only one community can be associated with a route.
(B). The community attribute is an optional nontransitive attribute.
(C). Multiple communities can be associated with a route.
(D). The community attributes is an optional transitive attribute.
Answer: C,D
NO.121 You are asked to configure and apply a new routing policy to influence routing
advertisements received from a specific EBGP peer.
In this scenario, which statement is true?
(A). The new policy should be applied as an export policy for the specific EBGP peer.
(B). The new policy should be applied as an import policy for the specific EBGP peer.
(C). The new policy should be applied as an export for the EBGP group in which the peer is defined.
(D). The new policy should be applied as an import policy for the EBGP group in which the peer is
defined.
Answer: B
NO.122 Which statement is true when using VLANs in a bridge domain on an MX Series device?
(A). The VLAN tags of the received packet are always translated.
(B). Only outer VLAN tags can be normalized.
(C). The VLAN tag of the received packet must match the VLAN tags associated with one of the logical
interfaces.
(D). Outer and inner VLAN tags always checked at egress.
Answer: C
48
IT Certification Guaranteed, The Easy Way!
You have configured OSPF between two routers. The OSPF adjacency will not form.
Referring to the exhibit, what is the problem?
(A). Router is not receiving hellos on the configured interface.
(B). The OSPF version does not match on the configured interfaces.
(C). The router is not sending hellos on the configured interface.
(D). The area does not match on the configured interfaces.
Answer: D
49
IT Certification Guaranteed, The Easy Way!
Your router has an external peering session to 10.10.25.5 and several internal peers. However, routes
learned from EBGP peers are showing up in a hidden state on IBGP peers.
Where would you apply the policy shown in the exhibit to solve this issue?
(A). Apply the next-hop-self as an export policy to the external BGP peers.
(B). Apply the next-hop-self as an import policy to the external BGP peers.
(C). Apply the next-hop-self as an export policy to the internal BGP peers.
(D). Apply the next-hop-self as an import policy to the internal BGP peers.
Answer: C
NO.125 You want to disable MAC learning only for interface ge-0/0/0.0 on an MX Series device.
Which syntax will accomplish this task?
(A).
(B).
50
IT Certification Guaranteed, The Easy Way!
(C).
(D).
Answer: C
https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/layer-2-services-
mac-bridge-domain-or-logical-interface-disabling-learning-for.html
NO.126 You are logged into a PE router participating in a Layer 3 VPN as defined in RFC 4364. You
would like to ping the remotely connected CE router's loopback address. The address of the loopback
is 122.161.2.1, the VPN routing-instance is called VPN-C.Which command will accomplish this goal?
(A). ping instance VPN-C 122.161.2.1
(B). ping routing-instance VPN-C 122.161.2.1
(C). ping VPN-C 122.161.2.1
(D). ping vpn-instance VPN-C 122.161.2.1
Answer: B
51
IT Certification Guaranteed, The Easy Way!
Referring to the exhibit, the GRE tunnel between R-1 and R-2 allows connectivity between User-1 and
Server-1. When User-1 communicates with Server-2 with packets that are 1472 bytes in size, no
packet fragmentation occurs. User-1 can communicate with Server-1 with packets that are up to
1448 bytes in size with no packet fragmentation. However, if the packet size is larger than 1448
bytes, packet fragmentation occurs.
Why is the packet fragmentation occurring between User-1 and Server-1 in this scenario?
(A). The GRE header adds 20 bytes to the packet
(B). The GRE header adds 24 bytes to the packet
(C). The IP header adds 20 bytes to the packet
(D). The IP header adds 24 bytes to the packet
Answer: B
NO.128 What is the size of the unique address used to identify each node on an Ethernet LAN?
(A). 3 bytes
(B). 6 bytes
(C). 9 bytes
(D). 12 bytes
Answer: B
NO.129 What is the Junos default router priority advertisement value for IS-IS?
(A). 64
(B). 32
(C). 0
(D). 127
Answer: A
https://www.juniper.net/documentation/en_US/junos/topics/concept/routing-protocol-is-is-
security-designated-router-understanding.html#:~:text=If%20routers%20in
%20the%20network,a%20priority%20value%20of%2064.
NO.130 Which two statements are true about IBGP on MX Series devices? (Choose two.)
(A). Neighbors can be located anywhere within the AS
(B). Interface Lo0 must be used for peering
52
IT Certification Guaranteed, The Easy Way!
NO.131 Which two Layer 2 protocols are supported on MX Series devices? (Choose two.)
(A). BGP
(B). RIP
(C). RSTP
(D). MSTP
Answer: C,D
Referring to the exhibit, which two statements are true? (Choose two.)
(A). The OSPF neighbor will be declared down if BFD hello packets are not received for 1.5 seconds
(B). The OSPF neighbor will be declared down if BFD hello packets are not received for 5 seconds
(C). The OSPF neighbor will be declared down if 500 BFD hello packets are missed
(D). The OSPF neighbor will be declared down if three BFD hello packets are missed
Answer: A,D
NO.133 Which three statements are true about GRES? (Choose three.)
(A). Kernel information is preserved.
(B). Interface information is preserved.
(C). GRES requires only one RE.
(D). GRES requires redundant REs.
(E). Control plane information is preserved.
Answer: A,B,D
53
IT Certification Guaranteed, The Easy Way!
NO.135 The IPv6 Neighbor Discovery Protocol (NDP) performs the same function as which two IPv4
protocols? (Choose two.)
(A). ICMP
(B). ARP
(C). DNS
(D). DHCP
Answer: A,B
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/ipv6-neighbor-
discovery.html#:~:text=Neighbor%20discovery%20for%20IPv6%
54
IT Certification Guaranteed, The Easy Way!
20replaces,Discovery%20protocol%20(NDP)%20messages.
NO.136 What are two characteristics of a traditional Ethernet LAN? (Choose two.)
(A). Nodes share a physical medium.
(B). Nodes can successfully transmit simultaneously.
(C). It consists of a single broadcast domain.
(D). Nodes use a step-up algorithm when collisions are detected.
Answer: A,C
NO.137 You are logged into a PE router participating in a Layer 3 VPN as defined in RFC 4364. You
would like to ping the locally connected CE router's interface. The address of the interface is
192.168.1.1; the VPN routing-instance is named VPN-A.Which command will accomplish this task?
(A). ping routing-instance VPN-A 192.168.1.1
(B). ping instance VPN-A 192.168.1.1
(C). ping vpn-instance VPN-A 192.168.1.1
(D). ping VPN-A 192.168.1.1
(E). ping mpls l3vpn VPN-A 192.168.1.1
Answer: A
NO.138 You have recently configured MSTP on two switches in your network to participate in the
same MSTP region. You issue the show spanning-tree mstp configuration command on both switches
and notice that the configuration digests do not match.
What does this mismatch indicate?
(A). Everything is functioning as expected because the configuration digests should not match.
(B). You should ensure that the max-age and hello timers are equal on both switches.
(C). You should ensure that the bridge IDs and priority values are unique on both switches.
(D). You should ensure that the MSTIs and their VLAN IDs are equal on both switches.
Answer: D
55
IT Certification Guaranteed, The Easy Way!
Customer 1 has experienced some hardware failures that erroneously transitioned some links into a
forwarding state, as shown in the exhibit.
In this scenario, which STP feature set would solve this problem?
(A). MAC movement protection
(B). Loop protection
(C). BPDU protection
(D). Root protection
Answer: B
NO.141 Before configuring an RSVP LSP in your network, you first apply a baseline configuration to
all of the routers.Which three configuration elements are minimally required in the baseline?
(Choose three.)
(A). family mpls on the loopback interface
(B). family mpls on the transit interfaces
(C). protocols ldp for the appropriate interfaces
(D). protocols mpls for the appropriate interfaces
(E). protocols rsvp for the appropriate interfaces
Answer: B,D,E
NO.144 What are three label operations that an MPLS-enabled router performs? (Choose three.)
(A). swap
(B). push
(C). pop
(D). insert
56
IT Certification Guaranteed, The Easy Way!
(E). rewrite
Answer: A,B,C
NO.146 Click the Exhibit button. Which two topologies shown in the exhibit could be implemented
without a spanning-tree protocol? (Choose two.)
(A). ring
(B). tree
(C). star
(D). mesh
Answer: B,C
NO.147 Which configuration can be applied to ensure that no more than 600 MAC addresses are
learned by a virtual switch?
57
IT Certification Guaranteed, The Easy Way!
(A). Option A
(B). Option B
(C). Option C
(D). Option D
Answer: B
NO.148 You asked to deploy a large-scale IS-IS network with multiple areas.
In this scenario, which two statements are true? (Choose two.)
(A). The area IDs must be the same for Level 2 routers to from an adjacency.
(B). Level1 routers can from an adjacency with any other Level 1 router.
(C). Level1 routers can from an adjacency with any other Level 2 router.
(D). The area IDs must be the same for Level1 routers to from an adjacency.
Answer: B,D
NO.149 You are asked to design a Layer 2 VPN service between service provider networks that
needs Ethernet transport capabilities. The VPN should support two or three endpoints. Which Layer 2
VPN technology should you propose?
(A). LDP-signaled VPLS
(B). BGP-signaled VPLS, using the RFC 4448 Layer 2 frame format
(C). LDP Layer 2 circuit, using the RFC 4448 Layer 2 frame format
(D). BGP Layer 2 VPN
58
IT Certification Guaranteed, The Easy Way!
Answer: B
NO.150 Which two problems occur when increasing numbers of users are added to an Ethernet LAN
with no switches present? (Choose two.)
(A). There is a greater chance for collisions to occur
(B). The MAC table sizes increase
(C). Some devices will not see certain traffic
(D). There is unnecessary consumption of network bandwidth
Answer: A,D
NO.151 In your network, you have two LDP routers connected across four physical interfaces. You
have also enabled LDP to operate on all four of those interfaces. What is the resulting outcome of
your configuration between those two routers?
(A). One session is built across one neighbor relationship
(B). One session is built across four neighbor relationships
(C). Four sessions are built across one neighbor relationship
(D). Four sessions are built across four neighbor relationships
Answer: B
NO.152 An IS-IS level 1-only router is configured within a larger multilevel hierarchy. Which OSPF
area type resembles the routing information in the L1 router's table?
(A). OSPF default area
(B). OSPF stub area
(C). OSPF NSSA
(D). OSPF NSSA with no summaries
Answer: D
Explanation/Reference:
Referring to the exhibit, which statement about the IS-IS interface is true?
(A). The ge-0/0/0.0 interface will act as an L1/L2 interface
(B). The ge-0/0/0.0 interface will act as an L2 interface only
(C). The ge-0/0/0.0 interface will act as an L1 interface only
(D). The ge-0/0/0.0 interface will not be assigned to a level
Answer: A
NO.154 What are two benefits of using an OSPF designated router (DR)? (Choose two.)
(A). Reduces the size of the link-state database.
(B). Reduces LSA flooding on a broadcast segment.
59
IT Certification Guaranteed, The Easy Way!
NO.155 Click the Exhibit button. Given the OSPF topology shown in the exhibit, how many unique
link-state databases are present in the network?
(A). 1
(B). 2
(C). 3
(D). 6
Answer: C
NO.156 Which Layer 2 mechanism logically groups network nodes into separate broadcast domains?
(A). IS-IS levels
(B). OSPF areas
(C). VLAN
(D). IP subnets
Answer: C
60
IT Certification Guaranteed, The Easy Way!
A customer has two VLANs to extend between Site-1 and Site-2. The customer does not want to
route the VLANs or renumber the VLANs.
Referring to the exhibit, which two VLAN IDs are egressing the MX Series device towards the optical
transport network after translation? (Choose two.)
(A). 500
(B). 501
(C). 201
(D). 200
Answer: A,B
NO.158 You are setting up a new IS-IS adjacency between two devices. The new Level1 adjacency is
not establishing.
What would cause this behavior?
(A). The routers support a minimum MTU of 1492 bytes.
(B). The Level 1 routers have mismatched area IDs.
(C). The router ID has not been explicitly configured.
61
IT Certification Guaranteed, The Easy Way!
NO.159 You have just configured IPv6 in your network. A packet arrives on your router that exceeds
the MTU size. How will an IPv6 router respond?
(A). The fragment offset is referenced and the packet is fragmented.
(B). The packet is kept intact and not fragmented.
(C). The packet is dropped.
(D). The packet is fragmented based on extension headers.
Answer: C
Referring to the exhibit, if there is a connection failure between router1 and router2, how much time
will pass before the devices declare the BFD session dead?
(A). 1200 ms
(B). 300 ms
(C). 600 ms
(D). 900 ms
Answer: D
NO.161 By default, the Junos OS advertises which address(es) in LDP forwarding equivalency class
(FEC) messages?
(A). all router addresses
(B). all transit interfaces
62
IT Certification Guaranteed, The Easy Way!
NO.162 Which two functions are performed by the OSPF designated router? (Choose two.)
(A). It advertises link-state information to the AS
(B). It designates some routers as inactive when not needed
(C). It forms adjacencies with all the other OSPF routers on the link
(D). It chooses the backup designated router
Answer: A,C
https://sites.google.com/site/amitsciscozone/home/juniper-junos/junos--ospf-designated-router
63
IT Certification Guaranteed, The Easy Way!
Answer: C
You are asked to enable a new BGP connection on R1, which has an existing IPv4 peering with R2. The
new peering with R3 will use IPv6.
Referring to the exhibit, which two steps are required to enable the new IPv6 peering? (Choose two.)
(A). Configure an IPv6 address on the appropriate interface.
(B). Configure the rib inet6.0 statement under the BGP group.
(C). Configure an IPv6 neighbor address under the BGP group.
(D). Configure an IPv6 local address under the BGP group.
Answer: A,C
NO.165 Which two statements are correct regarding TLVs in IS-IS? (Choose two.)
(A). PDUs contain different TLVs.
(B). TLVs contain different PDUs.
(C). The TLV attributes are type, length, and value.
(D). The TLV attributes are time. Length, and variable.
Answer: A,C
64
IT Certification Guaranteed, The Easy Way!
Referring to the exhibit, which IS-IS router will be selected as the DIS?
(A). Router 1
(B). Router 4
(C). Router 2
(D). Router 3
Answer: B
NO.167 Router B is an OSPF router connected to both Area 0 and Area 2. Area 2 has been configured
as a totally stubby area.Which three LSA types does Router B suppress from Area 2? (Choose Three.)
(A). Router LSA
(B). Network LSA
(C). External LSA
(D). Summary LSA
(E). ASBR Summary LSA
Answer: C,D,E
65
IT Certification Guaranteed, The Easy Way!
NO.169 You want to save adjacency formation time between two routers participating in OSPF, as
well as reduce the size of the OSPF link-state database.
How would you accomplish these tasks?
(A). Configure a virtual link.
(B). Specify a designated router.
(C). Specify a backup designated router.
(D). Define a point-to-point connection.
Answer: D
66
IT Certification Guaranteed, The Easy Way!
Referring to the exhibit, which two statements are correct? (Choose two.)
(A). The router will install the 0.0.0.0/0 route into the routing table when no BGP prefixes are present
(B). The router will remove the 0.0.0.0/0 route from the routing table when no BGP prefixes are
present
(C). The router will remove the 0.0.0.0/0 route from the routing table when any BGP prefixes are
present
(D). The router will install the 0.0.0.0/0 route into the routing table when any BGP prefixes are
present
Answer: B,D
NO.171 You have configured multiple IP-IP tunnels across your network to provide connectivity to
remote sites.Which technique is used to help the IP endpoints in your network determine the optimal
packet size to send across your tunnels?
(A). path MTU discovery
(B). fragmentation discovery
(C). end-to-end MTU discovery
(D). packet throughput discovery
Answer: A
NO.172 Which action would you use to connect two virtual switches that are configured on the
same router?
(A). Create a VRF routing instance
(B). Create a forwarding routing instance
(C). Connect the virtual switches with a cable
(D). Configure an irb interface
67
IT Certification Guaranteed, The Easy Way!
Answer: B
NO.173 By default, which three criteria are used by the Junos load-balancing algorithm to determine
a traffic flow? (Choose three.)
(A). protocol
(B). source port
(C). destination port
(D). source address
(E). destination address
Answer: A,D,E
NO.175 Which forwarding table designation is used to indicate that load balancing is working
correctly?
(A). ucst
(B). msct
(C). ulst
(D). mlst
Answer: C
NO.176 You are establishing RSVP LSPs through your MPLS-enabled network. You are asked to
ensure that the LSPs will support end-to-end class-of-service handling.
Which statement is correct in this scenario?
(A). Configure ultimate-hop-popping on the egress device.
(B). Configure implicit-null on all MPLS-enabled devices.
(C). Configure explicit-null on all MPLS-enabled devices.
(D). Configure entropy-label on the egress device.
Answer: C
Referring to the configuration in the exhibit, which two statements are true? (Choose two.)
(A). The next-hop 172.16.1.2 must respond to ping commands for the route 192.168.5.0/24 to be
active.
(B). The next-hop 172.16.1.2 must be active in route table inet 3 for the route 192.168.5.0/24 to be
68
IT Certification Guaranteed, The Easy Way!
active.
(C). The next-hop 172.16.1.2 must be part of an active route in route table inet 0 for route
192.168.5.0/24 to be active.
(D). The next-hop 172.16.1.2 must be directly connected to the router for route
Answer: C,D
NO.178 You have been asked to provision a service provider's network to accommodate Layer 3
VPNs as defined in RFC 4364.Which three tasks must be performed before the provider network is
ready to carry VPN traffic? (Choose three.)
(A). All Juniper Networks PE routers must be configured with an appropriate router-ID unique to the
VPN.
(B). All Juniper Networks PE routers must be configured with an appropriate route-target unique to
the VPN.
(C). All Juniper Networks PE routers must be configured with a routing-instance of type forwarding.
(D). All Juniper Networks PE routers must be configured with a routing-instance of type vrf.
(E). All Juniper Networks PE routers must be configured with a routing-instance containing the CE-
facing interface.
Answer: B,D,E
NO.179 Click the Exhibit button. Referring to the exhibit, what must be true of the vlan_100 bridge
domain?
69
IT Certification Guaranteed, The Easy Way!
NO.181 What must be configured for all IBGP speakers in an AS to have consistent routing
information?
(A). Partial mesh of EBGP sessions between EBGP speakers
(B). Default routes to the IBGP gateways
(C). Static routes to the EBGP gateways
(D). Full mesh of IBGP sessions between IBGP speakers
Answer: D
NO.182 You have been asked to use a convention that allows for auto configuration of interface
addresses.
You are not allowed to use DHCPv6. What do you do?
(A). Use IPv4 with the autoconfig option under family inet.
(B). Use IPv6 in the network to configure hosts.
(C). Use a program (e.g. Vector-Wiz) to auto configure IP addresses.
(D). Use an IPv6 static configuration.
Answer: B
NO.183 Which packet type does the router use to request up-to-date link-state information?
(A). IIH
(B). LSP
(C). PSNP
(D). CSNP
Answer: C
NO.184 To prevent fragmentation issues across a GRE tunnel, which MTU value is recommended for
the tunnel to accommodate most IP packets?
(A). 1476
(B). 1492
(C). 1500
(D). 1524
Answer: D
70
IT Certification Guaranteed, The Easy Way!
By default, at which router will the implicit null (Label3) action take place for LSP shown in the
exhibit?
(A). R4
(B). R2
(C). R1
(D). R3
Answer: D
71
IT Certification Guaranteed, The Easy Way!
NO.187 By default, which RSVP reservation style is used by the Junos OS?
(A). fixed explicit
(B). fixed filter
(C). shared explicit
(D). wildcard filter
Answer: B
NO.188 What are two methods for decreasing the size of an OSPF link-state database (LSDB)?
(Choose two.)
(A). Ensure that all routers on a shared segment are configured with a priority value of 0.
(B). Use an interface type of p2p when possible.
(C). Segment large groups of routers into areas.
(D). Change a stub area to NSSA when possible.
Answer: B,C
NO.190 You are asked to change the default TTL handling behavior on your Junos device to ensure
that the RSVP-signaled LSPs in your MPLS network cannot be mapped.
Which configuration should be performed to accomplish this task?
(A). Configure the no-decrement-ttl parameter for each LSP on the ingress device
(B). Configure the no-propagate-ttl parameter for each LSP on the egress device
(C). Configure the no-propagate-ttl parameter for each LSP on the ingress device
(D). Configure the no-decrement-ttl parameter for each LSP on the egress device
Answer: B
NO.191 Which IPv6 extension header notifies intermediary devices that they must inspect the
packet's options?
(A). destination options header
(B). routing header
(C). hop-by-hop options header
(D). fragment header
Answer: B
https://en.wikipedia.org/wiki/IPv6_packet
NO.192 Which MPLS feature works with Constrained Shortest Path First (CSPF) to protect against
the primary and secondary paths using the same link?
(A). fate-sharing
(B). explicit null configuration
(C). policy control over LSP selection
72
IT Certification Guaranteed, The Easy Way!
NO.193 Click the Exhibit button. The policy shown in the exhibit has been configured and installed
on your router.
73
IT Certification Guaranteed, The Easy Way!
Referring to the exhibit, which two statements are true? (Choose two.)
(A). The configuration is for an external BGP session
(B). The local-address statement is not required for the BGP session to establish correctly
(C). The configuration is for an internal BGP session
(D). The local-address statement is required for the BGP session to establish correctly
Answer: C,D
https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-
statement/local-address-edit-protocols-bgp.html
NO.195 Which two events could cause the BGP Active state to appear? (Choose two.)
(A). The local router does not have a route to the peer device.
(B). The local router failed to establish a TCP connection with the peer device.
(C). A firewall is stopping all UDP packets.
(D). The BGP configuration is incomplete.
Answer: B,D
NO.196 You own a small company and need to assign IPv6 addresses to your routers. Because you
want to follow the guidelines spelled out in RFC 3177, you want to design your network with the
correct prefixes.Which prefix would your ISP likely allocate to your company?
(A). 47-bit prefix
74
IT Certification Guaranteed, The Easy Way!
NO.198 You observe that VPN routes are hidden on your PE router Which situation accounts for
these hidden routes?
(A). The protocol next-hop is not found in inet.3
(B). The protocol next-hop is not found in mpls 0
(C). The protocol next-hop is not found in bgp I3vpn 0
(D). The protocol next-hop is not found in inet 2
Answer: A
NO.199 In a stateless IPv6 auto-configuration scenario, what is the host's IPv6 address if the
interface's MAC address is 12:34:ab:cd:ef:56?
(A). fe80::1234:abff:fecd:ef56/64
(B). fe8::1234:abff:fecd:ef56/64
(C). fec0::1234:abff:fecd:ef56/64
(D). fe80::1234:abcd:ef56/64
Answer: D
75
IT Certification Guaranteed, The Easy Way!
NO.202 Which two IP addresses are considered Martian addresses? (Choose two.)
(A). 0.0.0.0/8
(B). 192.168.0.0/8
(C). 240.0.0.0/4
(D). 169.254.0.0/16
Answer: A,C
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/recognize-martian-addr-
routing.html
NO.204 Which two statements are correct regarding VPLS mesh groups? (Choose two.)
(A). Unicast packets destined to another PE router within the same mesh group are dropped by the
local PE router.
(B). Unicast packets destined to another PE router in a different mesh group are dropped by the local
PE router.
(C). Broadcast, multicast, and unicast packets of unknown origin received from a PE router are
flooded to all local CE routers.
(D). Broadcast, multicast, and unicast packets of unknown origin received from a PE router are
flooded to all remote PE routers.
Answer: A,C
NO.205 Which two statements are true about VRRP? (Choose two.)
(A). VRRP requires redundant REs on each member.
(B). Interfaces within the same VRRP group do not have to be on the same subnet for each member.
(C). Interfaces within the same VRRP group must be on the same subnet for each member.
(D). VRRP does not require redundant REs on each member.
Answer: C,D
NO.206 According to Juniper Networks, what are two reasons to peer using loopback addresses
when configuring BGP? (Choose two.)
(A). When establishing an IBGP connection
(B). When routers are not in the same autonomous system
(C). When routers are not directly connected
(D). When establishing a single-link EBGP connection
Answer: A,C
76
IT Certification Guaranteed, The Easy Way!
You are using OSPF as your IGP in your network. You have applied the OSPF configuration shown in
the exhibit to router R1.
Which statement is true in this scenario?
(A). Router R1 must be configured as a stub area for Area 0.0.0.0.
(B). Router R1 will send a default route to router R2.
(C). Router R2 will not have a route to subnet 172.16.4.0/24.
(D). Router R3 will not have a route to subnet 172.16.3.0/24.
Answer: D
NO.208 Click the Exhibit. You are receiving the same route prefix from four EBGP neighbors.
Based on the information provided in the exhibit, which route will be selected?
(A). Route 4
(B). Route 1
(C). Route 2
(D). Route 3
Answer: D
77
IT Certification Guaranteed, The Easy Way!
NO.209 Router A receives two similar route advertisements from different BGP peers.What would
cause a route to be selected in this scenario?
(A). having a lower MED value
(B). having a lower local preference
(C). learning a route from a peer with a higher peer ID
(D). learning a route from a peer with a higher IGP metric
Answer: A
Customer-1 wants the Service Provider to allow STP to operate normally on all ports but only allow
the MX Series devices to manage the Layer 2 topology.
Referring to the exhibit, which feature needs to be implemented on all devices to accomplish this
task?
(A). root protection
(B). MAC movement protection
(C). BPDU protection
(D). loop protection
Answer: D
NO.211 Which two statements are true about IP and GRE tunnels? (Choose two.)
(A). The protocol field is changed in the inner IP packet header
(B). Tunnel traffic is encrypted
(C). The TTL field is changed in the inner IP packet header
(D). Tunnel endpoints need a valid route to the remote endpoint
Answer: C,D
NO.212 Which two statements are true for GRE tunneling? (Choose two.)
(A). GRE tunnel endpoints must have a valid route to the remote endpoint
(B). GRE tunnels support multiple logical units per interface
(C). GRE tunnels are stateful by default
(D). GRE tunnels support only one logical unit per interface
Answer: A,B
78
IT Certification Guaranteed, The Easy Way!
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/filtering-unicast-packets-
multicast-tunnel-interfaces.html#id-configuring-unicast-tunnels
NO.213 Click the Exhibit button. What does IS-IS/18 mean in the output displayed in the exhibit?
79
IT Certification Guaranteed, The Easy Way!
NO.216 Which two statements describe advantages of using BGP for VPLS signaling instead of LDP
signaling? (Choose two.)
(A). There is no need for MPLS signaling protocol.
(B). There is a well-defined scaling hierarchy.
(C). There is a separation of signaling from other services.
(D). There is auto discovery.
Answer: B,D
80
IT Certification Guaranteed, The Easy Way!
NO.218 Click the Exhibit button. In the exhibit, three IPv6 addresses are listed. Which two
statements are true? (Choose two.)
You must create a static route on Router-A to the 10.10.5.0/24 network using 10.10.3.2 as the next
hop.
Referring to the exhibit, which configuration accomplishes this task?
81
IT Certification Guaranteed, The Easy Way!
(A).
(B).
(C).
(D).
Answer: D
NO.220 Click the Exhibit button. An interface is configured as shown in the exhibit. What must also
be configured for this interface to participate in VLAN 100 and 200?
82
IT Certification Guaranteed, The Easy Way!
You have just configured a GRE tunnel, but you notice that the GRE tunnel is flapping.
Referring to the exhibit, which two would you take to solve this problem? (Choose two.)
83
IT Certification Guaranteed, The Easy Way!
(A). Add a specific static route to the local peer's network with the remote devices'loopback address
as the next-hop gateway.
(B). Add a specific route to the remote device's loopback address with the next-hop device defined as
the next-hop gateway.
(C). Set the GRE interface with a larger TTL value.
(D). Remove the existing 192.168.2.0/30 static route.
Answer: B,D
NO.222 You have two MX Series devices connected together and configured for Layer 2 operations.
The interface that connects the two routers must carry tagged and untagged traffic.
Which approach would meet this objective?
(A). Configure the interfaces as access ports with the native VLAN option
(B). Configure the interfaces as trunk ports with the native VLAN option
(C). Configure the interfaces as access ports with the voice VLAN option
(D). Configure the interfaces as trunk ports with the voice VLAN option
Answer: B
NO.223 You are configuring a default static route using the default preference value. You want to
ensure that any static route that you configure in the future will be less preferred than the OSPF
routes that are configured on the network.
Which command will accomplish this task?
(A). set protocols ospf preference 6
(B). set routing-options static route <IP address> preference 9
(C). set routing-options static defaults preference 20
(D). set routing-options static defaults passive
Answer: C
NO.224 Which three statements are true about the BGP community attribute? (Choose three.)
(A). There are three well-known communities.
(B). Communities can be used to signal local preference in other AS networks.
(C). Only well-known communities can be passed between AS networks.
(D). Routing policies can be simplified using BGP communities.
(E). Communities are used in the route selection process.
Answer: A,B,D
84
IT Certification Guaranteed, The Easy Way!
In the exhibit, which two routers will perform a swap action on LSP1? (Choose two.)
(A). R1
(B). R2
(C). R4
(D). R3
Answer: A,B
NO.226 By default, which BGP attribute is only compared when two route advertisements are
received from the same neighboring AS?
(A). MED
(B). AS-Path
(C). Communities
(D). Next Hop
Answer: A
85
IT Certification Guaranteed, The Easy Way!
Both configuration hierarchies shown in the exhibit have been committed to your MX Series device.
Which two statements are true in this scenario? (Choose two.)
(A). Traffic destined to 10.3.0.1 will use the R1-to-R6 LSP as a next hop
(B). Traffic destined to 10.3.0.1 will not use the R1-to-R6 LSP as a next hop
(C). The active 10.3.0.0/24 prefix installed in the route table will have a route preference of 5
(D). The active 10.3.0.0/24 prefix installed in the route table will have a route preference of 7
Answer: A,D
86
IT Certification Guaranteed, The Easy Way!
Referring to the exhibit, which two statements are true? (Choose two.)
(A). The LSP is protected with link protection.
(B). The last node in the path will not pop the MPLS label.
(C). The last node in the path will pop the MPLS label.
(D). The LSP is protected with fast reroute.
Answer: A,C
NO.230 Click the Exhibit button. In the exhibit, all routers are sending routes to Router B
87
IT Certification Guaranteed, The Easy Way!
NO.231 Which two statements describe operations performed by the encapsulating tunnel endpoint
in an IP-IP tunnel? (Choose two.)
(A). It decrements the time-to-live (TTL) counter by one in the inner IP header
(B). It modifies the source and destination addresses in the inner IP header
(C). It adds an outer IP header with the destination address of the remote tunnel endpoint
(D). It creates and adds a new inner IP header with the remote destination device's IP address
Answer: A,C
You have applied the policy shown in the exhibit to the forwarding table on an MX Series device.
How is traffic load-balanced?
(A). per frame
(B). per packet
(C). per segment
(D). per flow
88
IT Certification Guaranteed, The Easy Way!
Answer: B
The router with the configuration shown in the exhibit has two interfaces, both of which are
operational and can pass traffic. These interfaces are connected to two different routers, both of
which are configured for OSPF area 0.0.0.1. The router has received LSAs and can now send traffic
into the backbone area.
Which two statements are correct? (Choose two.)
(A). The router is an ASBR.
(B). The router has only a single OSPF adjacency.
(C). The router is an ABR.
(D). The router has two OSPF adjacencies.
Answer: B,C
89
IT Certification Guaranteed, The Easy Way!
Referring to the exhibit what are two reasons for the configuration stanza? (Choose two.)
(A). to reduce the risk of forwarding traffic through a stateless tunnel
(B). to mark the tunnel down after the hold-time expires
(C). to remove the tunnel interface from inet.0 after the hold-time expires
(D). to mark the tunnel up after the hold-time expires
Answer: A,B
NO.235 An Ethernet bridge is configured such that all interfaces are in a single broadcast
domain.Which two tasks does the bridge perform in response to receiving a frame with an unknown
unicast destination MAC address? (Choose two.)
(A). It drops the frame.
(B). It floods the frame out of all interfaces except the one on which is was received.
(C). It learns the destination MAC address.
(D). It learns the source MAC address.
Answer: B,D
NO.236 You are adding nonforwarding route reflectors to your network. Which three actions ensure
that VPN routes are advertised properly? (Choose three.)
(A). Use rib-groups to add IGP routes to inet.3 and/or inet6.3 on the route reflectors.
(B). Add MPLS LSPs between the route reflectors and their client routers.
(C). Add the route reflectors to the same IGP domain as their clients.
(D). Use rib-groups to add VPN routes to inet.0 and/or inet6.0 on the route reflectors.
(E). Add a static default route to inet.3 and/or inet6.3 on the route reflectors.
Answer: A,B,E
90
IT Certification Guaranteed, The Easy Way!
You configured R1 and R2 to form an OSPF adjacency, but the adjacency will not establish.
Referring to the exhibit, which statement correctly identifies the problem?
91
IT Certification Guaranteed, The Easy Way!
(A). Hello and dead timers are not matching between R1 and R2
(B). R1 does not have a router ID defined
(C). R1 and R2 have the same router ID
(D). R2 has a wrong area configured
Answer: C
https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-
statement/router-id-edit-routing-options.html
92
IT Certification Guaranteed, The Easy Way!
93
IT Certification Guaranteed, The Easy Way!
NO.241 Click the Exhibit button. Given the OSPF network topology shown in the exhibit, you would
like to inject external (non- OSPF) routes into the network on Router D
94
IT Certification Guaranteed, The Easy Way!
Which two OSPF area types will support this configuration? (Choose two)
(A). stub area
(B). totally stubby area
(C). not-so-stubby area
(D). non-backbone area
Answer: C,D
In the network shown in the exhibit, all switches are configured with the default STP root bridge
priority, and Switch A has been selected as root. You recently added the older Switch D into the
network as an access switch, and notice it has taken over as root.
Which configuration would solve this problem?
(A).
95
IT Certification Guaranteed, The Easy Way!
(B).
(C).
(D).
Answer: C
https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-
statement/no-root-port-edit-protocols-stp.html
96
IT Certification Guaranteed, The Easy Way!
97
IT Certification Guaranteed, The Easy Way!
Referring to the exhibit, the GRE tunnel between R-1 and R2 allows connectivity between User-1 and
Server-1. User-1 can communicate with Server-1 with packets that are up to 1448 bytes in size.
However, if the packet size is larger than 1448, User-1 cannot communicate with Server-1.
In this scenario, how do you solve the communication problem?
(A). Change the physical MTU on the ge-0/0/3 interfaces on R-1 and R-2 to 1448 bytes.
(B). Change the physical MTU on the gr-0/0/0 interfaces on R-1 and R-2 to 1448 bytes.
(C). Apply the allow-fragmentation statement to the GRE tunnel configuration.
(D). Apply the path-mtu-discovery statement to the GRE tunnel configuration.
Answer: C
NO.244 Which two statements are correct about default BGP route propagation? (Choose two.)
(A). IBGP speakers advertise IBGP-learned routes to other IBGP peers.
(B). EBGP speakers advertise IBGP-learned routes to other EBGP peers by using apolicy.
(C). IBGP speakers advertise EBGP-learned routes to other IBGP peers.
(D). EBGP speakers advertise IBGP-learned routes to other EBGP peers.
Answer: B,C
98
IT Certification Guaranteed, The Easy Way!
Referring to the exhibit, which two statements are true? (Choose two.)
(A). The configuration is for an external BGP session
99
IT Certification Guaranteed, The Easy Way!
(B). The local-address statement is required for the BGP session to establish correctly
(C). The multi-hop statement is required for the BGP session to establish correctly
(D). The configuration is for an internal BGP session
Answer: B,D
You are configuring an IBGP group. When you commit your configuration, you receive the error
shown in the exhibit.
Which additional configuration parameter must you add to your configuration?
(A). multipath
(B). type external
(C). type internal
(D). export <policy name>
Answer: C
100
IT Certification Guaranteed, The Easy Way!
Referring to the exhibit, which configuration must be set on R2 to from a Level 1 IS-IS adjacency with
R1?
(A). Set interfaces lo0 unit 0 family iso address 49.0001.3415.0010.0250.0000.0046.00
(B). Set interfaces lo0 unit 0 family iso address 49.0002.3414.0010.0250.0000.0046.00
(C). Set interfaces lo0 unit 0 family iso address 49.0002.3415.0010.0250.0000.0046.00
(D). Set interfaces lo0 unit 0 family iso address 49.0001.3414.0010.0250.0000.0046.00
Answer: A
101
IT Certification Guaranteed, The Easy Way!
https://tools.ietf.org/html/rfc3768
You are planning the addition of a new EX3400 Series device to the network (EX-3400-7) to service
MSTI-1 and MSTI-2.
Referring to the exhibit, which requirement must be met on EX-3400-7 for the MSTP instances to
become fully operational and resilient?
(A). The MSTP revision-level must be incremented.
(B). The CIST must be extended to EX-3400-7.
(C). The MSTP configuration-name must be the same.
(D). The bridge-priority must match EX-3400-5 and EX-3400-6.
Answer: C
NO.252 You notice that the RID of your router is being taken from the address of your management
interface.
What could cause this scenario?
(A). The loopback address was configured with a /32 address.
(B). The loopback address was not configured under [edit protocols ospf].
(C). A suitable loopback address was not configured on the router.
(D). The loopback address was configured under [edit routing-options].
Answer: C
102
IT Certification Guaranteed, The Easy Way!
103
IT Certification Guaranteed, The Easy Way!
Referring to the exhibit, R-1 and R-2 are connected with a LAG on the ae0 interface.
However, the LAG is not operational.
Which action will solve this problem?
(A). Change one device to use LACP passive mode.
(B). Change the system ID on one device.
(C). Set the LACP system priority to a non-zero value on one device.
(D). Set the LACP system priority to a non-zero value on both devices.
Answer: B
NO.254 In your RSVP network you have configured three separate LSPs to the same egress address.
You have made no other configuration changes to the forwarding decisions made by the
router.Which commands can you use to determine which LSP is being used to forward packets?
(A). show route table inet.3
104
IT Certification Guaranteed, The Easy Way!
NO.255 What is required on the egress and ingress devices to transport IPv6 traffic across an IPv4
network?
(A). An IP-IP interface
(B). A TE tunnel interface
(C). A GRE tunnel interface
(D). A 6to 4 tunnel interface
Answer: C
NO.257 Which two IS-IS packet types are used to maintain IS-IS database synchronization? (Choose
two.)
(A). IIH
(B). LSP
(C). PSNP
(D). CSNP
Answer: C,D
NO.258 You have two OSPF routers that are trying to form an adjacency. When you issue the
105
IT Certification Guaranteed, The Easy Way!
command show ospf neighbor, you see that one router is in the loading state and the other is in the
full state.Why are you seeing the router's state as loading?
(A). The router does not know about the received LSA header and has transmitted a link-state
request.
(B). The router has finished transmitting, but is still receiving database information.
(C). The router is waiting for a start event.
(D). The router has established bidirectional communication with its peer.
Answer: B
NO.259 Which two statements are true about NSR? (Choose two.)
(A). NSR requires graceful restart to function properly
(B). NSR requires redundant REs.
(C). NSR requires only one RE.
(D). NSR requires GRES to function properly.
Answer: B,D
106
IT Certification Guaranteed, The Easy Way!
You are troubleshooting a new BGP peering session which is not establishing.
Referring to the exhibit, which statement is true?
(A). The update messages contain an unsupported option
(B). The neighbor does not support IPv6
(C). The peer's AS number is misconfigured
(D). The TCP session is not establishing
Answer: C
NO.262 Which two statements are true when considering logical systems? (Choose two.)
(A). Logical systems do not support nonstop active routing
(B). Logical systems share the master routing table and can create routing instances
(C). Logical tunnels cannot be used to connect logical systems
(D). Logical systems provide management separation by providing user access per logical system
Answer: C,D
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-logical-systems-
for-routers-and-switches.html
NO.263 You have been asked to identify what the contributing routes are for route
204.7.15/21.Which command will show this information?
(A). show route 204.7.15/21
(B). show route 204.7.15/21 extended
(C). show route 204.7.15/21 exact summary
(D). show route 204.7.15/21 detail
Answer: D
NO.264 You notice that a route from internal BGP peer 192.168.1.1 is missing from the local route
table.Which two commands would be used to help identify the source of the problem? (Choose two.)
(A). show route bgp
(B). show route protocol bgp hidden
(C). show route receive-protocol bgp 192.168.1.1
(D). show route advertising-protocol bgp 192.168.1.1
Answer: B,C
107