You are on page 1of 1
AIRFRAMES 10. At 12. 13. 14, The passenger door windows with windows are optional. Interior trim kits for the helicopter are__/ ) ty, dr CA, and v Each crew seat is equipped with a__/ assembly rated for [502 Ibs. on is lap belt and shoulder harness. For fire protection, a manually operated re furnished with each helicopter. The helicopter. is equipped with a choice of landing gear, slondard \ GUN ” skid gear, kid gear, and r skid gear. The function of the support (rocking) beam on the aft crosstube is to reduce the possibility of ground resonance induced by the vibration. The seals,for the crew, litter, and passenger doors are attached to the airframe using Aédttesive An exterior handle operates the litter door latch that rotates COC Sto open the door. The door windows are attached to the doors using «© elie -v ‘and Sup Aelhesne “pe evirewuuc The fuselage has three primary structural assemblies ¢ section, 1 Setroe hy. Gyesection, and section. The vertical fin is installed with the leading edge at a reference to the aircraft longitudinal axis) degree angle (with The finlets, inet degrees led on each end of the horizontal stabilizer, are both offset _4 The firewalls are made from 4 ory and sheets. MOL ' The forward firewall fire seal covers are a two-piece 12. b/ assembly. wlan FPbar 407000-FMT-ENG 20100723-00-76-04 4-63 (©2010 Bol Heloopter Texton ne - Foe Training Purposes ny

You might also like