You are on page 1of 4

IS Codes followed

IS 2721
IS 456:2000.
IS 8112
IS 4826 (1979):
IS 808 (1989):
IS 4759 (1996):
IS 2629 (1985):

IS Codes followed
IS 1239-1 (2004)
IS 1730 (1989)
IS 4948 : 2020
IS 456:2000.
IS 8112
IS 4826 (1979):
IS 808 (1989):
IS 4759 (1996):
IS 2629 (1985):
IS Codes followed
Galvanized Steel Chain Link Fence Fabric
Plain and Reinforced Concrete - Code of Practice
Ordinary
Hot-DippedPortland Cement,
Galvanized 43 Grade
Coatings on Round
Steel Wires
Dimensions for Hot Rolled Steel Beam, Column, Channel and Angle Sections
Hot-dip zinc coatings on structural steel and other allied products
Recommended Practice for Hot-Dip Galvanizing of Iron and Steel

IS Codes followed
Steel Tubes, Tubulars and Other Wrought
Steel Fittingsfor steel plates,sheets strips
Dimensions
and flats for general engineering purposes
Welded Steel Wire Fabric for General Use - Specification ( Third Revision )
Plain and Reinforced Concrete - Code of Practice
Ordinary
Hot-Dipped Portland Cement,
Galvanized 43 Grade
Coatings on Round
Steel Wires
Dimensions for Hot Rolled Steel Beam, Column, Channel and Angle Sections
Hot-dip zinc coatings on structural steel and other allied products
Recommended Practice for Hot-Dip Galvanizing of Iron and Steel
Sl No Member Qty UoM
1 L Angle 50 x 50 x 6 mm- Each Post 3 m
2 L Angle 40 x 40 x 5 mm- Each Post 2.4 m
3 50 x 50 x 3 mm Chain Link Fence- 6 feet high 1 RM
4 4mm dia Line Wire 10 RM
5 12 Gauge Barbed Wire 10 RM

Sl No Member Qty UoM


1 MS Pipe (medium): Dia 50mm 1 m
2 MS Pipe (medium): Dia 40mm 1 m
3 Flat Strip : 50 x 6 mm 1 m
4 Mesh : 40 x 40 x 2.8 mm 1 m
Weight (kg)
(Pre-galvanization)
14.2
7.57
4.7
1
1.49

Weight (kg)-(Pre-galvanization)
5.03
3.6
2.36
4.5

You might also like