Professional Documents
Culture Documents
Creative Piping Solutions (Metal Tech Alloys India Group) Dealers of Below Origin Material
Manufactory Address:-
Plot No.G/3, Hutments Fosbery Road, Serwi, Mumbai – Tel. 022-6639-4505
400 015,Maharashtra (India), Whatsaap/ Mo.- 9079367689
Product range
Flat Bar
Size range: Width: 38 mm to 150 mm, Thickness: 4 mm to 30 mm
Material: Stainless steel, carbon steel, Alloys steel, copper nickel, Monel,
Hastelloy, Aluminum, etc.
Size Tolerances: ASTM A 484 and EN 10058
Length: 2 metres – 6 metres ( 8 feet to 20 feet)
Length Tolerance: Available in special cut to length bars in tolerance -0/+10
mm (-0/+0.5 inch)
Surface Finish: HRAP Condition
Grades: AISI: 303, 304L, 316L, 316Ti, 321, 630/17-4 PH, F 51
DIN: 1.4305, 1.4307, 1.4404, 1.4571, 1.4541, 1.4542, 1.4821, 1.4462
Steel Sheet
Item: Stainless Steel Sheet (Hot rolled, cold rolled) Manufacturer
Thickness: 0.01~200mm
Width: 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm,
3500mm, etc
Length: 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Surface Finish: 2B Finish, 2D Finish, BA Finish, NO.1 Finish, NO.4 Finish, NO.8
Finish, 8K Finish, Mirror Finish, Checkered, embossed Finish, hair line Finish, sand
blast, Brush, etching, Brushed Finish et
Grades: 202, 304, 316, 321, 310 , 410, 420, 416
Standard: ASTM A240, JIS4304-2005, ASTM A167, EN10088-2-2005,
GB/T3280-2007, etc
Steel Bar
Round Bar, Square Bar, Hexagonal Available in Both Polished and
Mill Finish
Form : Round, Square, Hex (A/F), Bush, Rectangle , Flat, Wire Mesh
Grades : Copper Nickel 90/10 Bar – Cu Ni 90/10 Bar 70600(90:10), C71500 (70:30), C71640
Copper Nickel Round Bars : 6 mm to 120 mm.
Range
Copper Nickel Square : 10 mm to 200 mm.
Bars Range
: 0.1 mm to 5 mm.
WERKSTOFF
STANDARD UNS EN BS GOST JIS AFNOR
NR.
Monel 400 N04400 2.4360 NiCu30Fe NA 13 МНЖМц 28-2,5-1,5 NW 4400 NU-30M
Monel K500 N05500 2.4375 - - - - -
GOST МН Мц 28-2,5-1,5 -
BS NA 13 -
EN NiCu30Fe -
Hastelloy Bar
Round Bar, Square Bar, Hexagonal
ASTM B574 (Bar), ASTM B575 (Sheet), ASTM B619, ASTM B622, ASTM B626
Specification :
(Tube), UNS N10276
Grade : Hastelloy B2 ,Hastelloy X , Hastelloy C22 ,Hastelloy C276
: hastelloy Round Bar, hastelloy Square Bar, hastelloy Flat Bar, hastelloy
Form Hex Bar, hastelloy Threaded Bar, hastelloy Rod
WERKSTOFF
STANDARD UNS EN BS OR GOST JIS
NR.
Range : 5 mm To 500 mm Dia in 100 mm TO 6000 mm Length available with NACE MR 01-75.
ASTM / ASME SB 166, ASTM / ASME B 446 , ASTM / ASME B 637, ASTM B 511, ASTM B
Standard :
408.
Length : 100 mm To 3000 mm Long & Above
Finish : Bright, Polish & Black
Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging
Form :
Etc.
Grade : Inconel 600 Bars – UNS N06600, Inconel 601 Rods – UNS N06601, Inconel 625 Wire –
UNS N06625, Incoloy 800 Bars – UNS N08800, Incoloy 800H / HT Rods – UNS N08810,
Incoloy 825 Round Bars– UNS N08825
WERKSTOFF
STANDARD UNS JIS AFNOR BS GOST EN OR
NR.
Inconel / NCF
2.4816 N06600 NC15FE11M NA 13 МНЖМц 28-2,5-1,5 NiCr15Fe ЭИ868
Incoloy 600
Length & Sizes (in 1000 x 2000 , 1000 x 2000 , 1220 x 2440 , 1250 x 2500, 1500 x 3000 to 6000, 2000 x 4000 to 6000, 1500 x
mm) 3000 , 2000 x 2000 , 2000 x 4000 , 2m, 2.44m, 3m, 36" X 120" or 48" X 144", 4' x 8', Cut to size available
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Value Added Service Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc.
Jindal Stainless, Thyssenkrup, POSCO, Aperam, DKC Korea, Baosteel, TISCO, Arcelor Mittal, VDM, Nippon Metal,
Manufacturers
Outokumpu
Stainless Steel Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width
Stainless Steel Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width
Stainless Steel Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in
Specialized in
width
Stainless Steel Clad plate: Clad plate is a composite steel plate made by bonding plate, etc.
Free Quote, Inquiry answered within 24 hours
Hot rolled steel sheet
Surface Annealing Remarks
Hot rolled coils are annealed with scale. Decarburized layer is generated at surface. Suitable for
Yes
Non pickled applications which needs grinding.
No As hot rolled with scale. Hardness because not annealed. Availability of working is subject to
negotiation.
Hot rolled and annealed after descaling at pickling line. Attractive surface and very little decarburized
Yes
layer.
Pickled
Descaled at pickling line. Comparatively soft material suitable to applications which require no
No
working or will be annealed by customers.
Hot rolled and annealed after descaling by shot blasting. Suitable for applications which require
Yes
Shot blasted rough surface finish and for thicker gauge which can not be pickled.
Mechanically descaled by shot blasting. Rough finish surface and hardened surface. Suitable for
No
punch working.
No As cold rolled. Suitable for applications which require annealing by customer. Bright finish at cold
rolling.
Yes Spheroidized by annealing after cold rolling. Dull finish by skinpass rolling after annealing.
Dull finish
No As cold rolled with dull finish at cold rolling. Has advantage of less risk of defects than in bright finish.
Chemical Composition
Designation Chemical composition (%)
Classification
JIS SAE C Si Mn P S Cu Ni Cr Ni+Cr Mo V
S20C 0.18-0.23 0.15-0.35 0.30-0.60 ≤0.030 ≤0.035 ≤0.30 ≤0.20 ≤0.20 ≤0.35
S35C(M) 0.32-0.38 0.15-0.35 0.60-0.90 ≤0.030 ≤0.035 ≤0.30 ≤0.20 ≤0.20 ≤0.35
S45C(M) 0.42-0.48 0.15-0.35 0.60-0.90 ≤0.030 ≤0.035 ≤0.30 ≤0.20 ≤0.20 ≤0.35
S50C(M) 0.47-0.53 0.15-0.35 0.60-0.90 ≤0.030 ≤0.035 ≤0.30 ≤0.20 ≤0.20 ≤0.35
SAE1050 0.48-0.55 0.15-0.35 0.60-0.90 ≤0.030 ≤0.050
S55C(M) 0.52-0.58 0.15-0.35 0.60-0.90 ≤0.030 ≤0.035 ≤0.30 ≤0.20 ≤0.20 ≤0.35
SAE1055 0.50-0.60 0.15-0.35 0.60-0.90 ≤0.030 ≤0.050
Carbon steel S60CM 0.55-0.65 0.15-0.35 0.60-0.90 ≤0.030 ≤0.035 ≤0.30 ≤0.20 ≤0.20
SAE1060 0.55-0.65 0.15-0.35 0.60-0.90 ≤0.030 ≤0.050
S65CM 0.60-0.70 0.15-0.35 0.60-0.90 ≤0.030 ≤0.035 ≤0.30 ≤0.20 ≤0.20
SAE1065 0.60-0.70 0.15-0.35 0.60-0.90 ≤0.030 ≤0.050
S70CM 0.65-0.75 0.15-0.35 0.60-0.90 ≤0.030 ≤0.035 ≤0.30 ≤0.20 ≤0.20
SAE1070 0.65-0.75 0.15-0.35 0.60-0.90 ≤0.030 ≤0.050
SAE1074 0.70-0.80 0.15-0.35 0.50-0.80 ≤0.030 ≤0.050
S75CM 0.70-0.80 0.15-0.35 0.60-0.90 ≤0.030 ≤0.035 ≤0.30 ≤0.20 ≤0.20
Mn steel SAE1541 0.36-0.44 0.15-0.35 1.35-1.65 ≤0.030 ≤0.050
Mn-Cr steel SMnC443 0.40-0.46 0.15-0.35 1.35-1.65 ≤0.030 ≤0.030 ≤0.30 ≤0.25 0.35-
0.70
Cr steel SCr420 0.18-0.23 0.15-0.35 0.60-0.90 ≤0.030 ≤0.030 ≤0.30 ≤0.25 0.90-
1.20
SCM415 0.13-0.18 0.15-0.35 0.60-0.90 ≤0.030 ≤0.030 ≤0.30 ≤0.25 0.90- 0.1
1.20 5-
Cr-Mo steel 0.2
5
SCM420 0.18-0.23 0.15-0.35 0.60-0.90 ≤0.030 ≤0.030 ≤0.30 ≤0.25 0.90- 0.1
1.20 5-
0.2
5
SCM435 0.33-0.38 0.15-0.35 0.60-0.90 ≤0.030 ≤0.030 ≤0.30 ≤0.25 0.90- 0.1
1.20 5-
0.3
0
Ni-Cr-Mo SNCM220 0.17-0.23 0.15-0.35 0.60-0.90 ≤0.030 ≤0.030 ≤0.30 0.40- 0.40- 0.1
steel 0.70 0.60 5-
0.2
5
SAE8620 0.18-0.23 0.15-0.35 0.70-0.90 ≤0.030 ≤0.040 ≤0.35 0.40- 0.40- 0.1
0.70 0.60 5-
0.2
5
SK85 (M) 0.80-0.90 0.10-0.35 0.10-0.50 ≤0.030 ≤0.030 ≤0.25 ≤0.25 ≤0.30
Carbon
tool steel SK95 (M) 0.90-1.00 0.10-0.35 0.10-0.50 ≤0.030 ≤0.030 ≤0.25 ≤0.25 ≤0.30
SKS5 0.75-0.85 ≤0.35 ≤0.50 ≤0.030 ≤0.030 ≤0.25 0.70- 0.20-
Alloy 1.30 0.50
tool steel
SKS51 0.75-0.85 ≤0.35 ≤0.50 ≤0.030 ≤0.030 ≤0.25 1.30- 0.20-
2.00 0.50
SKS81 1.10-1.30 ≤0.35 ≤0.50 ≤0.030 ≤0.030 ≤0.25 ≤0.25 0.20-
0.50
SUP10 0.47-0.55 0.15-0.35 0.65-0.95 ≤0.030 ≤0.030 ≤0.30 0.80- 0.1
Spring steel 1.10 5-
0.2
5
SAE6150 0.48-0.53 0.15-0.35 0.70-0.90 ≤0.030 ≤0.040 ≤0.35 ≤0.25 0.80- ≥0.
1.10 15
High carbon
Cr-bearing steel SUJ2 0.95-1.10 0.15-0.35 ≤0.50 ≤0.025 ≤0.025 ≤0.25 ≤0.25 1.30- ≤0.
1.60 08