Professional Documents
Culture Documents
Wiring Schematic OEM BW
Wiring Schematic OEM BW
and icemaker
Shade Port Control Wire
Connector A
Connector B Wire Sequence B
Wire Sequence B
Shade Control Wire Starboard Connection
Connector B
Connector A Wire Sequence B
E
Wire Sequence C E
Shade Control Wire Port Connection
Connector B
Wire Sequence B
Connector B
Wire Sequence B Shade Controller
C
Green Wire / Ground Terminal Block 3
C
Incoming Power
Shade Control Wire White Wire / Switch FWD
Black Wire / Switch REV
Momentary Toggle Switch Orange Wire / Circuit Board Power
Red Wire / Motor Power
D Schematic OEM - BW
Power lead w/ 5 amp fuse controller circuit board
REV
Ground lead to center of switch then controller
All boat power supply wires must be a 6-8 gauge marine grade wire
Wiring
B Rev Power lead w/ 15 amp fuse for shade motors Note: FWD and REV wiring sequence B
A: Added specifications to include all
boat power supply wires to be 6-8 for Boston Whaler models only
gauge wires
"Wire Sequence A" - Power Harness "Wire Sequence B" - Control Wire Leading to Actuators "Wire Sequence C" - Actuator Connections Connector Part Number
Connector Wire Position Wire Color Wire Description Connector Wire Position Wire Color Wire Description Connector Wire Position Wire Color Wire Description Connector A Deutsch Part # DT04-6P
1 Green Ground 1 White Sensor Communication 1 White Sensor Communications Connector B Deutsch Part # DT06-6S
2 White Switch Connection REV 2 Red Sensor Positive Power 2 Red Sensor Positive Power
A 3 Black Switch Connection FWD 3 Black Sensor Ground 3 Black Sensor Ground UNLESS OTHERWISE SPECIFIED: NAME DATE
A
DIMENSIONS ARE IN INCHES DRAWN RKR 11-10-16
4 Red Motor Positive Power 4 Orange Motor Positive Power 4 Black Motor Ground TOLERANCES:
RKR TITLE:
FRACTIONAL CHECKED 11-10-16
Circuit Board Positive ANGULAR: MACH BEND
5 Orange Power 5 Green Motor Ground 5 Red Motor Positive Power TWO PLACE DECIMAL
THREE PLACE DECIMAL
ENG APPR.
MFG APPR.
SureShade / OEM - BW
INTERPRET GEOMETRIC Q.A.
Wiring Schematic
PROPRIETARY AND CONFIDENTIAL TOLERANCING PER:
COMMENTS:
THE INFORMATION CONTAINED IN THIS MATERIAL
DRAWING IS THE SOLE PROPERTY OF SIZE DWG. NO. REV
SureShade / Rodan Enterprises. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
SureShade / Rodan Enterprises IS
NEXT ASSY USED ON
FINISH
D Wiring Schematic OEM - BW
A
PROHIBITED. APPLICATION SCALE: 1:10 WEIGHT: SHEET 1 OF 1
8 7 6 5 4 3 2 1