Professional Documents
Culture Documents
G G
NOTE:
· See figure 24 in the PAMS Hardware
Installation Manual for connection
details
F F
NOTE:
Nexis Cable · Not Connected
E RJ45
E
Power
Milspec
D D
N Type - Through
TNC-M N-M bulkhead N-M
NOTE: TNC- Through connectors
Requires 8-36V DC. Must
· Through bulkhead bulkhead connector
be connected in such a
TNC-M N-M N-M
connectors used to connect way power is controlled
antenna cables from the by the equipment main
C cab of the truck to the main
LMR400
N-M Nexis MX1 N-M SMA-M isolation switch. C
antenna runs
LMR400
LMR240
NOTE:
· Antenna Cables are to be cut to length
B · LMR240 cable is to be run inside of 10mm conduit which is sealed at both
B
ends with heat shrink.
· LMR 400 cable is to be run inside of 10mm conduit which is sealed at
both ends with heat shrink. TITLE