Professional Documents
Culture Documents
C A T A L O G
CLEVELAND: (800) 362-9267
CANTON: (877) 258-7601
TOLEDO: (800) 860-3352
www.chasephipps.com
Phipps helps contractors put work in place correctly and profitably by renting, selling, and
CUTTING EQUIPMENT
PUMPS/SPRAYERS
MISCELLANEOUS
Floor Prep Concrete Related Cutting Pumps/ Miscellaneous
Equipment Equipment Equipment Sprayers Items
National 5700 Battery Floor Stripper National 7600 Propane Floor Stripper
$685/day $2055/week $6165/month $785/day $2355/week $7,065/month
The All Day Battery Ride-On removal and floor preparation machine - The propane powered 7600 omits the lowest emissions in its class
this machine has the ability to operate through an average eight hour while designed to achieve massive removal rates. Easy to transport, fits
day without requiring a battery recharge, or electrical cord assistance. in a standard door frame and accessible to most passenger and freight
elevators, the 7600 can go places the others can not.
Specifications
Width* 24-1/2” Specifications
Height 50-1/2” Width* 30”
Length* 58-1/2” Height 61”
Weight 2244 lb Length* 63”
Removable Weight 185 lb front Weight** 2887
Weight (machine only) 2059 lb Removable Weight 1003 lb front, 75 lb rear
Speed up to 120 ft/min Weight (machine only)** 1809
Voltage 115/230 Speed up to 200 ft/min
Frequency 60 Hz/ 50 Hz HP 25
HP 4 * Note: These measurements are without tooling attached.
* Note: These measurements are without tooling attached.
National 5625 Propane Floor Stripper National 6280 Self Propelled Scraper
$685/day $2055/week $6165/month $230/day $690/week $2070/month
The 5625 boasts a 25 hp water cooled Kawasaki engine with the This self-propelled stripper will remove the worst of today’s glued-down
lowest emissions output in the industry. Its unique design allows the floors, gummy commercial carpet, VCT, solid vinyl, radial rubber tile,
5625 to plow through material without hesitation. sheet rubber, indoor and outdoor sport surfaces, roofing material, etc.
Specifications Specifications
Width* 26” Width 17-3/4”
Height 52-1/4” Max. Height 46”
Length* 63” Min. Height (handle folded) 30”
Weight** 1822 lb Max. Length (handle extended) 51”
Removable Weight 370 lb front/ 75 lb rear Min. Length (handle folded) 29”
Weight (machine only)** 1377 lb Weight 425 lb
Speed up to 200 ft/min Removable Weight 47 lb front / 43 lb side
HP 25 Weight (machine only) 335 lb
* Note: These measurements are without tooling attached. Speed 10-45 ft/min
RPM 3450/2850
Voltage 115/230
Frequency 60 Hz/ 50 Hz
HP 1.5
Amps 20
* Note: These measurements are without tooling attached.
Cleveland: (800) 362-9267
Canton: (877) 258-7601 • Toledo: (800) 860-3352
www.chasephipps.com
Diamond Grinding
ICRI Profiles: 2 & 3
Diamond Grinding can produce a ICRI CSP of between 2 & 3.
A number 2 is normally produced via grinding with diamond tooling of 30 grit.
Shot Blasting
ICRI Profiles: 3 - 7
Shot blasting is capable of producing ICRI CSP profiles of between 3 - 7 typically.
Scarification
ICRI Profiles: 5 - 9
Scarifiers are capable of producing ICRI CSP Profiles between 5 - 9
CONCRETE RELATED EQUIPMENT
Allen HDX 600 8’ Riding Trowel Allen MSP 470 8’ Riding Trowel
$475/Day $1425/Week $4275/Month $395/Day $1185/Week $3555/Month
Designed to satisfy the most demanding concrete contractors, the The MSP460 features joystick power steering and the power
Allen HDX600, Hydraulic-Powered Riding Trowel is packed with the and torque of the Kubota Diesel Turbo-charged engines, the
punch of a high-horsepower diesel engine and is the most powerful Mechanical-Drive Super Pro (MSP) Series is the most popular rider
rider in its class and also one of the most dependable. with larger contractors.
Specifications Specifications
Engine 59 HP Turbo Charged Kubota Diesel Width* 30”
Dimensions (L x W x H) 108 in. x 60.5 in. x 50.5 in. Height 61”
Panning Path Width 100 in. Length* 63”
Rotors (Diameter) 46 in. 6-Bladed Spider Weight** 2887
Maximum Rotor Speed 160 RPM Removable Weight 1003 lb front, 75 lb rear
Weight 2,128 lbs. Weight (machine only)** 1809
Fuel Capacity 11 gal. (41.6 L) Speed up to 200 ft/min
HP 25
* Note: These measurements are without tooling attached.
10
Allen Pro 436 Edging Trowel Allen Pro 446 Walk Behind Trowel
Pricing $95/Day 285/Week $855/Month $95/Day $285/Week $855/Month
Perfect for troweling along the edges of walls or around protruding Engineered for the concrete professional, our Allen Walkers are designed
pipe and conduit, the Edger features all the power and performance as to produce high tolerance concrete floors (as measured by F-Numbers)
our Professional Series. with high quality features that are hard to find on other trowels.
Specifications Specifications
Engine HONDA GX160 Engine Honda™ GX270 (270 cc )
Dimensions (L X H) 84” X 38” Dimensions (L x H) 89 in x 39 in
Rotor Diameter 36” - 4- BLADES Rotor Diameter 46 in 4-blades
Maximum Rotor Speed 118 RPM Maximum Rotor Speed 180 RPM
Weight 198 LBS Weight 252 lbs
Trowel Arms & Spider Standard Duty
Specifications Specifications
Drive System V-belt Capacity 4.5 cubic ft (127 l)
Drum Capacity 9 cu. ft, 254.9 L Maximum Load 600 lbs. (272 kg)
2 1/2 - 3 1/2 bags Engine 5.5 hp Honda
Dump Type Manual Discharge Height Adjustable from 2” (5.0 cm)
Discharge Height 21 in, 530 mm to 18” (121.9 cm)
Drum Type Steel Discharge Width 48” (122 cm)
Drum Thickness 10 Weight Hopper 461 lbs (210 kg)
Engine Cover Thickness 14 Length up to 42.5 ‘
Tire Size B78x13
Frame Type Tubular
Paint Type Powder coat
Power Source Honda GX240KIHA2
CONCRETE RELATED EQUIPMENT
12
Specifications
Max Drum Capacity (Mixing) 3 cu. ft
Drum Type poly
Power Source 1.0 HP, 115V, 60 Hz
single phase Electric Motor
Overall Length 48.75 in 1238 mm
Overall Width 23.5 in 597 mm
Overall Height 56.1 in 1425 mm
Shipping Dimensions 48.5 x 26.63 x 56.1 in
1232 x 600 x 864 mm
Operating Weight 138 lb 62.6 kg
Shipping Weight 138 lb 62.6 kg
13
Specifications Specifications
Engine Cylinder displacement 5.71 cu.inch
Cylinder displacement 4.48 cu.inch Power output 6.5 hp
Power output 5 hp Vibrations front handle 3.8 m/s²
Vibration & Noise Data Vibrations rear handle 5.1 m/s²
Vibrations front handle 2.4/2.4 m/s² Blade diameter 14 inch
Vibrations rear handle 2.4/2.4 m/s² Max cutting depth 10 inch
Sound pressure level at operators ear 101 dB(A)
Sound power level, guaranteed (LWA) 115 dB(A)
Cutting Equipment
Blade diameter 12/14 “
Max cutting depth 4/5 “
Weight 21.2/21.6 lbs
15
16
17
Arbortech Brick and Mortar Saw Husqvarna Hand Held Core Drill
$90/Day $270/Week $810/Month $50/Day $150/Week $450/Month
The AS160 Brick + Mortar Saw represents a revolution in cutting The Husqvarna Handheld Core Drill is a core drill for drilling up to 4in.
technology. Using a unique patented orbital cutting motion with two diameter openings. The unit can be used for a variety of applications
forward facing blades that combine to perform both a hammering and including making holes for ventilation, plumbing pipes, joints, electrical
cutting action. sockets and telecom cables.
18
1. 2. 3. 4. 5.
Toledo:
Branch Office & Warehouse
12450 Williams Road
Perrysburg, OH 43551
(419) 874-0033 • (800) 860-3352
Canton:
Branch Office & Warehouse
2993 Perry Drive SW
Canton, OH 44706
(330) 754-0467 • (877) 258-7601
www.chasephipps.com