Professional Documents
Culture Documents
SYLLABUS For JEE (Main) - 2021 Syllabus For Paper-1
SYLLABUS For JEE (Main) - 2021 Syllabus For Paper-1
SYLLABUS For JEE (Main) - 2021 Syllabus For Paper-1
MATHEMATICS
Section- A
UNIT5: ROTATIONAL MOTION
UNIT 1: PHYSICS AND MEASUREMENT
Centre of the mass of a two-particle
Physics, technology and society, S I Units, system, Centre of the mass of a rigid body;
fundamental and derived units, least count, Basic concepts of rotational motion; a
accuracy and precision of measuring moment of a force; torque, angular
instruments, Errors in measurement, momentum, conservation of angular
Dimensions of Physics quantities, momentum and its applications; the
dimensional analysis and its applications. moment of inertia, the radius of gyration.
UNIT 2: KINEMATICS Values of moments of inertia for
Natural and synthetic, rubber and Inorganic compounds; Mohr’s salt, potash
vulcanization, some important polymers alum.
with emphasis on their monomers and uses Organic compounds: Acetanilide, p-nitro
– polythene, nylon, polyester and bakelite. acetanilide, aniline yellow, iodoform.
UNIT 26: BIOMOLECULES
The chemistry involved in the titrimetric
General introduction and importance of exercises – Acids, bases and the use of
biomolecules. indicators, oxalic-acid vs KMnO4, Mohr’s
salt vs KMnO4
CARBOHYDRATES - Classification; Chemical principles involved in the
aldoses and ketoses: monosaccharides qualitative salt analysts:
(glucose and fructose) and constituent
monosaccharides of oligosaccharides Cations – Pb2+, Cu2+, Al3+, Fe3+, Zn2+, Ni2+,
(sucrose, lactose and maltose). Ca2+, Ba2+, Mg2+, NH4+
Anions- CO2− 2-
3 , S ,SO4 ,
2− NO3-
, NO2-, Cl-, 3. Preparation of lyophilic and lyophobic
- - sols.
Br , I ( Insoluble salts excluded).
Chemical principles involved in the 4. Kinetic study of the reaction of iodide
following experiments: ion with hydrogen peroxide at room
temperature.
1. Enthalpy of solution of CuSO4
2. Enthalpy of neutralization of strong acid
and strong base.
SYLLABUS FOR JEE (Main)-2021
Syllabus for Paper-2A (B.Arch)
Part –I MATHEMATICS
Sets and their representation: Union, Principle of Mathematical Induction and its
intersection and complement of sets and their simple applications.
algebraic properties; Power set; Relation,
UNIT 6: BINOMIAL THEOREM AND ITS
Type of relations, equivalence relations,
SIMPLE APPLICATIONS:
functions; one-one, into and onto functions,
the composition of functions. Binomial theorem for a positive integral
index, general term and middle term,
UNIT 2: COMPLEX NUMBERS AND
properties of Binomial coefficients and
QUADRATIC EQUATIONS:
simple applications.
Complex numbers as ordered pairs of reals,
UNIT 7: SEQUENCE AND SERIES:
Representation of complex numbers in the
form a + ib and their representation in a Arithmetic and Geometric progressions,
plane, Argand diagram, algebra of complex insertion of arithmetic, geometric means
number, modulus and argument (or between two given numbers, Relation
amplitude) of a complex number, triangle between A.M and G.M sum up to n terms of
inequality, Quadratic equations in real and special series; Sn, Sn2, Sn3. Arithmetico-
complex number system and their solutions Geometric progression.
Relations between roots and co-efficient,
nature of roots, the formation of quadratic UNIT 8: LIMIT, CONTINUITY AND
DIFFERENTIABILITY:
equations with given roots.
Real – valued functions, algebra of functions,
UNIT 3: MATRICES AND DETERMINANTS: polynomials, rational, trigonometric,
logarithmic and exponential functions,
Matrices, algebra of matrices, type of inverse function. Graphs of simple functions.
matrices, determinants and matrices of order Limits, continuity and differentiability.
two and three, properties of determinants, Differentiation of the sum, difference,
evaluation of determinants, area of triangles product and quotient of two functions.
using determinants, Adjoint and evaluation Differentiation of trigonometric, inverse
of inverse of a square matrix using trigonometric, logarithmic, exponential,
determinants and elementary composite and implicit functions; derivatives
transformations, Test of consistency and of order up to two, Rolle’s and Lagrange's
solution of simultaneous linear equations in Mean value Theorems, Applications of
two or three variables using determinants and derivatives: Rate of change of quantities,
matrices. monotonic-Increasing and decreasing
UNIT 4: PERMUTATIONS AND functions, Maxima and minima of functions
COMBINATIONS: of one variable, tangents and normal.
UNIT 1: SETS, RELATIONS AND FUNCTIONS: Principle of Mathematical Induction and its
simple applications.
Sets and their representation: Union,
intersection and complement of sets and their UNIT 6: BINOMIAL THEOREM AND ITS
algebraic properties; Power set; Relation, SIMPLE APPLICATIONS:
Type of relations, equivalence relations,
Binomial theorem for a positive integral
functions; one-one, into and onto functions,
index, general term and middle term,
the composition of functions.
properties of Binomial coefficients and
UNIT 2: COMPLEX NUMBERS AND simple applications.
QUADRATIC EQUATIONS:
UNIT 7: SEQUENCE AND SERIES:
Complex numbers as ordered pairs of reals,
Arithmetic and Geometric progressions,
Representation of complex numbers in the
insertion of arithmetic, geometric means
form a + ib and their representation in a
between two given numbers, Relation
plane, Argand diagram, algebra of complex
between A.M and G.M sum up to n terms of
number, modulus and argument (or
special series; Sn, Sn2, Sn3. Arithmetico-
amplitude) of a complex number, triangle
Geometric progression.
inequality, Quadratic equations in real and
complex number system and their solutions
Relations between roots and co-efficient, UNIT 8: LIMIT, CONTINUITY AND
nature of roots, the formation of quadratic DIFFERENTIABILITY:
equations with given roots. Real – valued functions, algebra of functions,
polynomials, rational, trigonometric,
UNIT 3: MATRICES AND DETERMINANTS: logarithmic and exponential functions,
inverse function. Graphs of simple functions.
Matrices, algebra of matrices, type of
Limits, continuity and differentiability.
matrices, determinants and matrices of order
Differentiation of the sum, difference,
two and three, properties of determinants,
product and quotient of two functions.
evaluation of determinants, area of triangles
Differentiation of trigonometric, inverse
using determinants, Adjoint and evaluation
trigonometric, logarithmic, exponential,
of inverse of a square matrix using
composite and implicit functions; derivatives
determinants and elementary
of order up to two, Rolle’s and Lagrange's
transformations, Test of consistency and
Mean value Theorems, Applications of
solution of simultaneous linear equations in
derivatives: Rate of change of quantities,
two or three variables using determinants and
monotonic-Increasing and decreasing
matrices.
functions, Maxima and minima of functions
UNIT 4: PERMUTATIONS AND of one variable, tangents and normal.
COMBINATIONS:
UNIT 9: INTEGRAL CALCULAS:
The fundamental principle of counting,
Integral as an anti-derivative, Fundamental
permutation as an arrangement and
Integrals involving algebraic, trigonometric,
combination as section, Meaning of P (n,r)
exponential and logarithms functions.
and C (n,r), simple applications.
Integrations by substitution, by parts and by
partial functions. Integration using
trigonometric identities.
Evaluation of simple integrals of the type of intersection of a line and a circle with the
𝑑𝑥 𝑑𝑥 𝑑𝑥 𝑑𝑥
centre at the origin and condition for a line to
∫ 𝑥 2 +𝑎2 , ∫ , ∫ 𝑎2 − 𝑥2 , ∫
√𝑎 2 − 𝑥 2 be tangent to a circle, equation of the tangent,
√𝑥 2 ± 𝑎2
𝑑𝑥 𝑑𝑥 (𝑝𝑥+𝑞)𝑑𝑥 sections of conics, equations of conic
, ∫ 2 ,∫ , ∫ 2 ,
𝑎𝑥 +𝑏𝑥+𝑐 √𝑎𝑥 2 + 𝑏𝑥+𝑐 𝑎𝑥 +𝑏𝑥+𝑐 sections (parabola, ellipse and hyperbola) in
(𝑝𝑥+𝑞)𝑑𝑥 standard forms, condition for Y = mx +c to
∫ √𝑎𝑥 2 + 𝑏𝑥+𝑐 ∫ √𝑎2 ± 𝑥 2 𝑑𝑥 ,
be a tangent and point (s) of tangency.
∫ √𝑥 2 − 𝑎2 𝑑𝑥
UNIT 12: THREE DIMENSIONAL
Integral as limit of a sum. The fundamental GEOMETRY
theorem of calculus, properties of definite
Coordinates of a point in space, the distance
integrals. Evaluation of definite integrals,
between two points, section formula,
determining areas of the regions bounded by
directions ratios and direction cosines, the
simple curves in standard form.
angle between two intersecting lines. Skew
UNIT 10: DIFFRENTIAL EQUATIONS lines, the shortest distance between them and
its equation. Equations of a line and a plane
Ordinary differential equations, their order
in different forms, the intersection of a line
and degree, the formation of differential
and a plane, coplanar lines.
equations, solution of differential equation by
the method of separation of variables, UNIT 13: VECTOR ALGEBRA
solution of a homogeneous and linear
Vectors and scalars, the addition of vectors,
differential equation of the type
components of a vector in two dimensions
𝑑𝑦 and three-dimensional space, scalar and
+ 𝑝(𝑥)𝑦 = 𝑞(𝑥)
𝑑𝑥
vector products, scalar and vector triple
UNIT 11: CO-ORDINATE GEOMETRY product.
Cartesian system of rectangular co-ordinates UNIT 14: STATISTICS AND PROBABILITY
10 in a plane, distance formula, sections
Measures of discretion; calculation of mean,
formula, locus and its equation, translation of
median, mode of grouped and ungrouped
axis, slop of a line, parallel and perpendicular
data calculation of standard deviation,
lines, intercept of a line on the co-ordinate
axes. variance and mean deviation for grouped and
ungrouped data.
Straight line
Probability: Probability of an event, addition
Various forms of equations of a line, and multiplication theorems of probability,
intersection of lines, angles between two Baye's theorem, probability distribution of a
lines, conditions for concurrence of three random variate, Bernoulli trials and binomial
lines, the distance of a point form a line, distribution.
equations of internal and external by sectors
UNIT 15: TRIGONOMETRY
of angles between two lines co-ordinate of
the centroid, orthocentre and circumcentre of Trigonometrical identities and equations,
a triangle, equation of the family of lines trigonometrical functions, inverse
passing through the point of intersection of trigonometrical functions and their
two lines. properties, heights and distance.
Circle, conic sections UNIT 16: MATHEMATICAL REASONING
A standard form of equations of a circle, the Statement logical operations and, or, implies,
general form of the equation of a circle, its implied by, if and only if, understanding of
radius and central, equation of a circle when tautology, contradiction, converse and
the endpoints of a diameter are given, points contrapositive.
Part – II APTITUDE Part – III PLANNING
NOTE:-
The NTA has decided to provide choices in one section (Section B) to cater to the decision of
different Boards across the country regarding the reduction of the syllabus. However, the total
number of questions to be attempted will remain the same (Physics – 25, Chemistry – 25 and
Mathematics – 25), wherever applicable.