Professional Documents
Culture Documents
Mukesh Sap Jokes
Mukesh Sap Jokes
a) A cycle unit of measure matching the characteristics assign to the measuring point
b) A start counter reading for scheduling
c) A technical object with a measuring point
d) A task list that has a performance base maintenance strategy assign
Q2 you want to customize the setting for functional location to map your technical assets in the
system
Which of the following do you have to define when creating a structure indicator?
a) Edit mask √
b) Functional location category
c) Hierarchy levels √
d) Labelling system
Q3 While creating the measuring point for piece of equipment you unit cannot maintain the unit of
measure of the measuring point
a) the unit of measure can only be entered during the creating of a measurement document
b) units of measure have not been configure for the measuring point category in customizing
c) the measuring point reference the unit of measure from the capacity header of the work
center assign to the point of equipment
e) the measuring point reference the unit of measure from the characteristics √
Q4 A production planner wants to display all pending maintenance order for a production planning
(PP) work center in the PP planning board
Q6 you want to configure the settings for time-based maintenance plans with the call object type
“maintenance order”
a) scheduling parameters √
b) number range √
c) material availbikity check
d) settlement profile
Q8 After parts have transferred to a subcontractor, which of the following defective parts in the SAP
ERP system?
Q9 your customer wants to generate a cost estimate using the maintenance plan costing
transaction?
Q10 Which of the following steps is mandatory for the cost update in the cost update in the
maintenance information (PMIS)
Q11.you want to define the organizational units for your maintenance department
Q13. Which of the following organizational units are mandatory to enable the integration of
a) Business area
b) Profit center
c) Controlling area √
d) Cost centers
Q14. Which of the following business processes are serial numbers a prerequisite?
Q15. You want the system to ignore the actual dates of a partially confirmed operation when
The maintenance order is scheduled manually. Which scheduling parameter must you set
Active in customizing?
a) Scheduling type
b) Adjust dates
c) Scheduling with breaks
d) Shift order √
Q16. What must you do to use mass changes for technical objects?
Q18. Your customer wants to make sure that a piece of equipment with the status AVLB has
a) Customize the equipment category as test equipment and use the system status to control
The installation
b) Customize an appropriate status profile and assign it to the equipment catgory
c) Customize an appropriate status profile and assign it to the equipment master
d) Customize a permit category and assign it to the equipment category.
Q19. Which settings can you configure for a notification type in customizing?
Q21. In which maintenance business process can you use value categories?
Q24. How can you change the layout of an equipment master record?
Q25. How can you enter a time confirmation for a maintenance order?
Q26. Which indicators can you set in customizing for assigning a task list to a maintenance
Order type?
a) Production Resource/tools(PRT)
b) Work center
c) Material
d) Operation
Q27. Which object do you link to value categories while customizing a maintenance order type
a) Cost Center
b) Cost element√
c) Activity type
d) G/L account
Q28. You want to set up your maintenance work centers to monitor their work load.
Which of the following must you assign to the maintenance work center?
Operations.
Which of the following Customizing steps must you perform to achieve this?
a) Set the indicator for notification data on order header data to active for the order type
and notification type combination.
b) Set up a control key that allows the assignment of notifications and use it in the
maintenance order operation
c) Assign the order type in the special notification parameters.
d) Set the indicator for enhanced object list functions to assignment of operations to all
object list entries active √
Q31. Which of the following objects have linear data related fields?
a) Task list
b) Object network√
c) Measuring point√
d) Material serial number
Which customizing parameters can you use for serial number profiles?
Q34. In your maintenance plan, the scheduling period is set to zero you want to schedule the
Maintenance plan via deadline monitoring and set the interval for call objects to zero
a) A new planned date is added when the current waiting call is converted to a call object.
b) A new planned date is scheduled within the call horizon
c) A set of new call objects is generated for all maintenance plan outside the call horizon
d) A new call objects is generated outside the call horizon
Q35. How do you activate sub screens in customizing for equipment master data?
a) Create a view profile and assign thus profile to the equipment category√
b) Create a screen group and assign this group to the equipment category
c) Define the fields selection for equipment master records
d) Activate the classification active indicator when defining additional business view
Q36. You have configured a new labelling system and assigned alternative labels to the
Functional locations. However the old labels are still displayed in the display for the
Functional locations.
a) Make sure the new labels are entered in your logon language
b) Delete the labels in the old labelling system
c) Change the screen layout to include the alternative label field
d) Enter the new labelling system in your user profile√
Q39. When does the system create a distribution rule for a maintenance order automatically?
Q40. What are prerequisities for using the measurement reading transfer function
a) The measuring points must be assigned to the same characteristic√
b) The characteristic assigned to the measuring points must be assigned to the same class
c) The code group assigned to the measuring points must be identical
d) The measuring points must have the same number of digits
Q41. Even though material has been issued against a maintenance order, the balance of the
Q42. You want the system to display an error if you attempt to close or set the deletion flag
Q44. You want to outsource a maintenance order operation for the operation you require the
Outside company to submit time sheets for approval what must you define?
Q45. What must you to create to process maintenance orders for external companies using
a) Partners√
b) Work centers√
c) Task list operations
d) Individual capacities
Q49. Which objects can you assign to a maintenance order operation as a production
Resource tool(PRT)?
a) Material√
b) Functional point
c) Measuring point√
d) Equipment √
e) Serial number
a) The value for the duration in the order operation must be greater than 0
b) The performing work center must have a control key with the scheduling operations
Indicator set.
c) The value for the actual work in the order operation must be greater than 0
d) The order operation must have a control key with the scheduling operations indicator set
Q51. Which business functions do you have to set up when customizing the inspection control
Of the availability check for each combination of plant and order type?
Q52. Which of the following objects can you assign to a maintenance work centermaster
Record?
a) Planner group
b) Task list usage√
c) Maintenance activity type
d) Capacity category√
Q54. Which standard reports do you use to monitor spsre parts planning in ongoing
Maintenance orders?
Q55. For a multiple counter maintenance plan, where do you whether a maintenance order
Is created when all cycles are due or as soon as one cycle is due?
Q56. For which fields can the system propose default values for the operation during the
Order confirmation?
Q58. What is the latest point in time you can configure the order settlement rule to be
a) The default account assignment in the settlement profile assigned to the order type
must be set to material.
b) The default account assignment in the settlement profile assigned to the order type
Must be set to the G/L account that is linked to the material.
c) The price control of the material to be refurbished must be set to moving average price
d) The price control of the material to be refurbished must be set to standard price
Q61. When a maintenance plan is used to create an order how can you prevent the order
Q62. Which of the following must you assign to use a cross plant planning scenario?
Q63. To which maintenance object type can assign a user status profile?
Q64. You are customizing calibration orders for test equipment management
Q65. For which objects can you default values in a maintenance order value profile?
a) Material
b) Cost element √
c) G/L account
d) Purchasing group√
a) Equipment
b) Cost element
c) Material
d) G/L account
a) Propose counter for the reference object based on the cycles entered
b) Use cycles of multiples dimensions
c) Use multiple time based counters
d) Assign a strategy for common dimensions
Q68. What do the initial and subsequent buffers in the preventative maintenance
Strategy determine?
Q70. After releasing a maintenance order you check the material availability list
Q71. You want to define the search sequence for viewable files.
Which workstation application do you have to assign to the viual instructions viewing
Application?
a) AVI
b) JT
c) BMP
d) RH
Q72. What is the difference between the maintenance activity type and cost controlling(CO)
Activity type?
Q73. Which of the following objects can you assign to an operation in a maintenance task
List?
Q74. If two maintenance packaged are due at the same time what parameter define which
a) Cycle length
b) Hierarchy
c) Initial buffer
d) Offset
Q75. You want to create digital signatures for maintenance order operations.
Q76. To which of the following can you assign a maintenance activity types?
Q77. What are prerequisities to assign a task list to a time based maintenance plan?
a) The same work center must be assigned to the task list header and the maintenance
Plan item
b) The task list and the maintenance plan item must be assigned to the same planner
group
c) The task list header must be assigned to the same maintenance strategy as the
maintenance plan header
d) The task list header and the maintenance plan item must be assigned to the same
planning plant
Q78. To which objects can you assign a responsible maintenance work center?
Q80. Which steps must you perform to prepare a task list to use a maintenance strategy?