Professional Documents
Culture Documents
The digital assignment has to be prepared and uploaded in any one of the following themes.
The evaluation will be based on the content and quality of the work. Programs developed
should be uploaded only after presenting them in person and got verified. Any
experimental/analytical results obtained also should be included in the report.
1. Write a Matlab program for determining the contact parameters and temperature rise
during the sliding of a ball on a flat. The program should be written in such a way
that user inputs are required regarding the material properties, geometric
dimensions, coefficient of friction, sliding speed etc. The program should be general.
Plot the graph between coefficient of friction and temperature rise for values of
friction from 0.1 - 1.0. Should be done for cases where Peclet number<5 and >5.
3. Write a Matlab program to determine the load carrying capacity of a plane slider
bearing. The user input should include the bearing dimensions, sliding speed,
viscosity of lubricant etc. Plot the variation of load carrying capacity for five different
sliding speeds.
5. Obtain two different oils. Determine their viscosities using a Redwood viscometer.
Plot the Viscosity at various temperatures (40 to100ºC). Determine the viscosity
index of these oils. The procedure has to be recorded in the video mode and
uploaded.