Professional Documents
Culture Documents
ii) Find v(t) for circuit shown below. Let e1max=10V and e2max=15V.
2) Find the power dissipated across 16ohm resistor for the circuit shown below. Use nodal
analysis.
3)
SET 2
3)
SET 3
ii) a) Sketch the following waveforms with the horizontal axis scaled in degrees:
v1= 80 sin(ωt - 45°) V b. v2= 40 sin(ωt -80°) V
b) What is the phase difference between v1 and v2?
2) Solve for I1, I2 and I3 using mesh analysis for the circuit shown below.
3)
SET 4
1) Find thevinin’s equivalent between terminals i) a and b and ii) b and C for the circuit
shown below
2)
i) Find Req for the circuit shown below.
3)
SET 5
1) i) Find Rab for the circuit shown below.
2) Write nodal equations and solve for Vab for the circuit shown below.
3)
SET 6
1) Find the RL and the maximum power for the network shown below
2)
3)
i) Find Req for the circuit shown below.
2 ohm
3 ohm 2 ohm
Req
2 ohm
2)
3) Find the RL and the maximum power for the network shown below.
SET 8
1) Find Rth and the maximum power dissipated for the circuit shown below
2)
i) Find Rab for the circuit shown below.
i) a) Sketch the following waveforms with the horizontal axis scaled in degrees: v1=
40 sin(ωt - 65°) V b. v2= 40 sin(ωt -140°) V
b) What is the phase difference between v1 and v2?
c) Determine which voltage leads and which lags.
3)
SET 9
1)
2) i) Find the currents IT, I1 and I5 for the circuit shown below.