TTL Te
CONSULTING & TESTING SERVICES
UNIVERSITY OF ENGINEERING & TECHNOLOGY, TAXILA
Ph: 051-9047635 Fax: 051-9047650
RATES FOR TESTS IN DIFFERENT LABORATORIES
(w.ec. February 22, 2016)
‘SOIL MECHANICS AND FOUNDATION ENGINEERING
St. No. Description Rate
4. _| Moisture content lab.) 600.
[2 [Unit weight (ab,) 600.
3._[a) Sieve analysis (dry) 7,500
b)_Sieve analysis (wash) 4,500,
Hydrometer 5,000
Liquid limit & Plastic iit 4,500
[ Shrinkage limit 600.
|) Permeabiity (constant head) 3,000
b)_Permeabiity (variable nead 3,000
&__| Direct shear _ 5,000.
3.__ | Consolidation 8,000.
10. | @) Specific gravity (fine grain) 4,500
b)_ Specific gravity (coarse grain) 4,500
71,_[ a) Standard compaction (4° mould) 2,000
b)_Standard compaction (6 mould) 2,500
12. | a) Modified compaction (4° mould) 2,500
b)_Modified compaction (6° mould 3,000
13._[a) One point CBR (soaked) /T-89 5,000
b)_One point CBR (unsoaket 3,500
14, | a) Three point CBR (soaked) T-103/T-99/T-180-D 8,500
b)_Three point GBR (unsoaked) * LAS 7,000 |
1, _| One point CBR (soaked) /T-180 6,000.
46._| Organic Matter 3,500 |
[17 | Field Density Test —_ [3,000 + transportation
18.__| Coefficient of Uniformity Din, Dan Den 3,000
19._| Field CBR Test 76,000 *Toading
arrangement by client
Triaxial Test = 5,000.
Unconfined test Z 2 |
22.__| Soll Resistivity test E 20,000
[ Relative Density of Sand 3,000_
Plate load test (according to location situation) 75,000 |
Unified Classification AASHTO at * 3,000.
Visit of expert at site 6,000.
Calibration of Speedy Moisture Tester 6.000.
Calibration of Vessels —1,000 each
Verification of Measuring tape 300.
Calibration of Trip Beam & electronic balance
Cait ctor Mould & Hammer
Density of Sand for Sand Cone Apparatus
Calibration of Sand Cone Apparatus
[ Bentonite (Clay) Liquid Limit,
“Thermometer Calibration upto 100"
N, CREE
CONSULTANCY SERVICES
Highway & Airport Designs, Hydraulic & Sedimentation Studies Municipal Designs, Irigation Studies
FIELD & LABORATORY SERVICES
Material Testing, Water & Sewage Sample TestingCONSULTING & TESTING SERVICES
UNIVERSITY OF ENGINEERING & TECHNOLOGY, TAXILA
Ph: 051-9047635 Fax: 051-9047650
RATES FOR TESTS IN DIFFERENT LABORATORIES
(w.e., February 22, 2016)
CONCRETE TECHNOLOGY
StNe Description Rate (Ra
[Concrete Mix Design _ eS a
1. | Moxdesign En 22,000
2._| Mix design (detailed)
‘Compressive Strength Tests mE :
3._ | Compressive strength test on Concrete/mortar cubes 350
4. [a) Compression test on cylinders without capping(already 350
capped by client) 700
b) Compression test on cylinders with capping of sulpher
‘Compression test on hollow & solid blocks 850
- ‘Compressive Strength of Tuff pavers! Ties 850
‘Compression test on bricks (with capping)
Bricks Tests x See
'8._| Water absorption of bricks
| Efflorescence test of bricks
Non Destructive Testss = az F =
10. | Non-destructive testing using rebound hammer, ulrasonic | Depends on the site and
____.__| tester, rebar locator a extent of work |
Ti | Core test performed (Culting+ Testing) 7 a 9500
12. | Core test (provided by the cl 5,000
Gémenk Tests =) z a HS
73. | Consistency 700
Note: Consistency testis essential for setting time test.
— 14, | intial setting time 700
45._| Final setting tme 700
16._| Soundness of cement 700
17._| Density/Specifc gravity of Gement 7/500
18. | a) Fineness of cement by sieve 7,000
b)_Fineness of cement by Blaine air permeability Apparatus 21000
19. | Compressive strength of cement using mortar cubes 8,500
q Sama Tests Seer 2500
20. | Sieve analysis 7.500 |
[-21.[ Fineness Modulus c a 4,000
22. | Water absorption 4,000
23._| Specific gravity of fine aggregate: 1.500.
|” 24. [ Soundness of fine aggregates by B.S. using sodium 9,500
| Sulphate or Magnesium Sulphate arr
[= 257 Sand Equivalent test 2,100.
[= 26" DensityiUnit weight (Rodded or Loose) of fine Aggregate | ____ 2,000.
27._| Material Finer than 0.075mm 40007
28._| Clay Lumps and Friable Particles eee 00)
[29 T Organic impurities == 2.500
{
16
(5 j
CONSULTANCY SERVICES
Project Planning & Design, Feasibility Studies, Structural Designs, Soil & Foundation Designs,
Highway & Airport Designs, Hydraulic & Sedimentation Studies Municipal Designs, Irigation Studies
FIELD & LABORATORY SERVICES
Material Testing, Water & Sewage Sample TestingAaah
CONSULTING & TESTING SERVICES
UNIVERSITY OF ENGINEERING & TECHNOLOGY, TAXILA
Ph: 051-9047635 Fax: 051-9047650
RATES FOR TESTS IN DIFFERENT LABORATORIES
(wef, February 22, 2016)
CONCRETE TECHNOLOGY (con
a
Sieve analysis zB
3 Specific gravity of aggregate
32._| Water absorption of aggregates
~33._| Crushing Value of Coarse Aggregate:
34._| Impact Value of Coarse Aggregate
'35._| Density/Unit weight (Rodded or Loose) of Coarse Aggregate 2,000,
‘36. | Soundness (aggregates) by B.S, using sodium Sulphate or 95,00
___| Magnesium Sulphate 2
37. | Los Angles Abrasion Value of Coarse Aggregate 2,100
40._| Organic Impurities
41. Flakiness & Elongation Index
Miscelianeous
Density of Concrete Block ete 00 |
‘Concrete Permeability Test 72,000 per Specimen |
Verification of Report —_ 500 per report
Duplicate Result 500 per report
[RIC.C. Pipes (@-EDGE BEARING TEST) ZPer Specimen
46. | RCC Pipe 3 & 4 inch Dia.
RCC Pipe 6 Inch Dia.
RCC Pipe 8 & 9 Inch
RCC Pipe 12 Inch Dia.
RCC Pipe 15 Inch Dia
RCC Pipe 18 Inch Dia.
RCC Pipe 21 to 24 Inch Dia
53._| RCC Pipe 24 and 30 Inch Dia,
54. | Physical Verification of RCC pipe (3 to 15 Inch Dia)
55. | Physical Verification of RCC pipe (15 to 30 Inch Dia)
7 Nop cam
CHAIRMAN DEAN, FC&EE
——
CONSULTANCY SERVICES
Project Planning & Design, Feasibility Studies, Structural Designs, Soil & Foundation Designs,
Highway & Airport Designs, Hydraulic & Sedimentation Studies Municipal Designs, ligation Studies
FIELD & LABORATORY SERVICES
Material Testing, Water & Sewage Sample TestingCONSULTING & TESTING SERVICES
UNIVERSITY OF ENGINEERING & TECHNOLOGY, TAXILA
Pe ae ILL.)
RATES FOR TESTS IN DIFFERENT LABORATORIES
(woes, February 22, 2016)
TRANSPORTATION ENGINEERING
{St.No. Description Rate (Rs.)
1.__| Penetration test 2,500
2.___| Softening point ‘ 5 1,500
[3 [Fiash and fire point z 2,000 |
‘4.__| Asphalt mix design 30,000 |
5.__| Los Angeles abrasion test 2,000
6. | Marshal stability & flow 3,500
7.__|Flakiness index
8. | Elongation index ae
9. | Specific gravity of aggregates
10. | Ten percent fines value test on coarse aggregates
11. | Density of aggregates
12._| Specific gravity of bitumen
13. | Water absorption (aggregates)
14. _| Fineness modulus
(45. [impact value
16. _| Bitumen Extraction
37__| Duetilty Test _
[Loss on Heating
‘Stripping and Coating
Solubility i
Collection of Core Samples (first 4 cores) | 7,000 per sampie
+ Transportation
22. | Collection of Core Samples (each core after 4 cores) | 1,200 per sample
z + Transportation
23. | GMM Test 3,000
24. | Gmb (Specific Gravity) of Cores a, 1,000 each |
Note: Transportation facility or charges for the same will be provided by the
client.
CHAIRMAN DRAM FREE
eS
CONSULTANCY SERVICES
Project Planning & Design, Feasibility Studies, Structural Designs, Soil & Foundation Designs,
Highway & Airport Designs, Hydraulic & Sedimentation Studies Municipal Designs, Irigation Studies.
FIELD & LABORATORY SERVICES
Material Testing, Water & Sewage Sample TestingCONSULTING & TESTING SERVICES
UNIVERSITY OF ENGINEERING & TECHNOLOGY, TAXILA
Ph: 051-9047635 Fax: 051-9047650
RATES FOR TESTS IN DIFFERENT LABORATORIES
(we. February 22, 2016)
RATE LIST FOR BORE HOLE/OPEN PIT RAWALPINDV/ISLAMABAD REGION
Sr.No. | Depth (ft) Rates (Rs.)
1 20 25,000
2 el es 35,000
a
4. 50
5. 60 x
6 70 £80,000 |
7; 80 ‘90,000 |
- 8. 0 400,000,
9 | 100 130,000
10, | Above 100 | 430,000 + 2,000 per ft
CONSULTANCY SERVICES
Project Planning & Design, Feasibility Studies, Structural Designs, Soil & Foundation Designs,
Highway & Airport Designs, Hydraulic & Sedimentation Studies Municipal Designs, Iigation Studies
FIELD & LABORATORY SERVICES
Material Testing, Water & Sewage Sample TestingRT aa
} CONSULTING & TESTING SERVICES
UNIVERSITY OF ENGINEERING & TECHNOLOGY, TAXILA
Ph: 051-9047635 Fax: 051-9047650
RATES FOR TESTS IN DIFFERENT LABORATORIES
(wes February 22, 2016)
STRENGTH OF MATERIALS
S.No. Description Rate (RS)
1.__| Deformed Steel Tensile Test (Upto 1 inch) 700 per Piece
2.__| Bend Test (Up to 1 inch) ‘400 per Piece
3. | Deformed Steel Tensile Test (Over 1 inch ) [71,200 per Piece
4.__| Bend Test (Over 1 inch) {600 per Piece
5._| Weight and Gauge 400 per Piece
6. [High Strength Tensile Test (Pre-stressing Strands) _ | 5,000 per Piece sao
[7 | Calibration of CBR Rings. 7,000 + Transportation
8,_| Calibration of Proving Ring (Capacity: 1000kN) | 12,000 + Transportation
\ 8 of Universal Testing Machine 25,000 + Transportation
10. ‘of Cube Testing Machine 18,000 + Transportation
1. of Dynamometer = 5,000 + Transportation.
12. of Batching Plant 18,000 + Transportation —_|
[13._| Calibration of Pile Test Jack 25,000_+ Transportation
| 14._| Calibration of Pre-stressing Unit 25,000 + Transportation
15._| Calibration of Microgauge 1,200 + Transportation __|
16. | Duplicate of Report (Copy) 500 (Per result) 4
17._[ Verification of Report = 500 (Per result) ]
Note: Transportation facility or charges for the same will be provided by the
client.
CHAIRMAN DEAN, FREE
SS SS
CONSULTANCY SERVICES
Project Planning & Design, Feasibility Studies, Structural Designs, Soil & Foundation Designs,
Highway & Airport Designs, Hydraulic & Sedimentation Studies Municipal Designs, Irigation Studies
FIELD & LABORATORY SERVICES
Material Testing, Water & Sewage Sample Testing