Professional Documents
Culture Documents
Exercise Objectives:
1. Build the circuit of Figure 18 in Multisim Electronics Workbench.
2. Connect a voltmeter between nodes 'D' and 'E' and measure across 9 Ohm resistor.
3. Connect an ammeter for the measurement of „IE‟.
4. Place your Registration no. in place of „?‟.
5. Simulate and note down the results.
Voltage:
Current:
Exercise Objective:
To calculate the value of the resistors by color
coding Submit your calculations as a Lab Report.
1. Complete the table by writing the name of the
colors.
2. Write down the color code for the resistor of value equal to your registration number.