Professional Documents
Culture Documents
不收缩灌浆水泥QME-00-S-145b - 000-EI-006-en-B-NON-SHRINKING CEMENT (HTCT601227)
不收缩灌浆水泥QME-00-S-145b - 000-EI-006-en-B-NON-SHRINKING CEMENT (HTCT601227)
OWNER'S
ENGINEER : TRACTEBEL ENGINEERING PVT LTD
GE POWER
Gas Power Systems
Document ID HTCT601227
MK
Equipment Tag Number(s):
Table of contents:
1 General .......................................................................................................................................... 2
1.1 Definitions............................................................................................................................. 2
1.2 Foreseen application and purpose ........................................................................................ 2
1.3 Categories and criticality....................................................................................................... 2
2 Material properties requirements.................................................................................................... 2
3 Form, fit and function requirements................................................................................................ 2
3.1 Design .................................................................................................................................. 2
4 Testing and verification requirements............................................................................................. 3
5 Process requirements .................................................................................................................... 3
2010-12-02 EN Approved
Lng. Status
6 Associated standards..................................................................................................................... 3
7 Transportation and logistic requirements........................................................................................ 3
Rev. Released
8 Notes ............................................................................................................................................. 3
8.1 Identification of changes ....................................................................................................... 3
B
9 Appendices .................................................................................................................................... 3
Type
DF
9560 HTCT601227
Dept. Document No.
The information contained herein is ALSTOM proprietary information and has been disclosed in confidence to the designated
party for specified purposes only. Any use, disclosure or reproduction contrary thereto is a violation of ALSTOM’s right.
©ALSTOM 2010. All rights reserved.
B 2/3
HTCT601227
1 General
1.1 Definitions
1) Alstom: Employees of Alstom or its designated representative.
2) Manufacturer: Company or factory responsible for manufacturing of component / part.
3) May: This word is used to indicate a course of action permissible within the
limits of the standard.
4) Shall: This word is used to indicate mandatory requirements strictly to be
followed in order to conform to the standard and from which no deviation
is permitted.
5) Supplier: Company or factory to which inquiry or order is awarded.
6) Will: This word is used in statements of fact.
3) All requirements of this specification have to be fully complied with. Where permissible
Type
DF
deviations are given, suppliers shall ensure that any value is appropriate within the
permissible deviation given.
4) It is critical to Alstom, that all required records are sufficiently established and where
9560 HTCT601227
Dept. Document No.
defined submitted to Alstom. In case Alstom is not requesting transmittal of such records,
supplier shall ensure that such records are maintained in accordance with the terms and
conditions of the order placed and international legislation.
3.1 Design
3.1.1 Technical data
1) Grain grading: 0-4 mm
2) Spreading rate: > 25 cm
3) Volume increase: 0.5 vol. percent max.
4) Handling time: 50 to 75 minutes
5) Begin and end of solidification: approx. 120 and 250 minutes respectively
6) Addition of water: if required, see mixing instructions of suppliers
The information contained herein is ALSTOM proprietary information and has been disclosed in confidence to the designated
party for specified purposes only. Any use, disclosure or reproduction contrary thereto is a violation of ALSTOM’s right.
©ALSTOM 2010. All rights reserved.
B 3/3
HTCT601227
24 hours 6 32
3 days 7 50
7 days 8 60
28 days 10 70
5 Process requirements
Lng. Status
6 Associated standards
This section is not applicable to this specification.
B
Type
DF
8 Notes
9 Appendices
This section is not applicable to this specification.
The information contained herein is ALSTOM proprietary information and has been disclosed in confidence to the designated
party for specified purposes only. Any use, disclosure or reproduction contrary thereto is a violation of ALSTOM’s right.
©ALSTOM 2010. All rights reserved.